whats the catch?

[Deano]

http://stores.ebay.com.au/resengun

sounds to good to be true. good feedback aswell.

anyone brought one?

[chopiesel]

the catch is they prob work half as good as the m/c on my ktm.

[03gixxerpilot]

the other thing that i would ask is the availability of spares inparticular leavers.

[BANDITROD]

i have sent him an email asking about spares and where they are made etc etc

[03gixxerpilot]

kool keep us posted

[Fight_fan]

They look decent enough ay! Wonder if they do a matching clutch lever as well tho?

[Deano]

quote:Originally posted by Fight_fan

They look decent enough ay! Wonder if they do a matching clutch lever as well tho?


my thourghts exactly.

you never no they could come from the same factory as genuine brembo cylinders. who nows where half the brand name stuff is made now days

[BANDITROD]

i have asked about clutch masters aswell

[Fight_fan]

Ur the man Rod!!!

[debaser]

I have found a lot of ebay stores selling this sort of gear brake discs etc.

I have ordered some gear off a couple. Maybe we should start a list of sellers that have decent gear. I have ordered a digital dash off one guy in Thailand he also sells "brembo" levers cylinders etc.

There is no polite way to put this but I can get stuff more than half the price offered by resellers here in aus. So why not. So a list of trust worthy sellers who offer spares would be handy for those of us looking for a bargain.

[debaser]

http://www.asianconceptthai.com/


Have just ordered off these guys. He is offering brembo levers as well as nice looking dashes for a good price.

They have an ebay store with good feedback.

[devo]

Soooooooooo has anyone dealt with them yet, I was looking at maybe getting a stearing damper , bt sometimes you just can't trust them [B)]

[Res7]

I had a look Debaser.
It seems you have to spend over $2000.
trade only.
I do want one of these though http://www.asianconceptthai.com/product_71_1022_EN.html2
They offer laser etching of logos on their parts too.
Maybe something for ASF honchos to look at?

[debaser]

They have an ebay store, only certain items. Might try and contact them and see what the go is.

That end can is for a mini bike or postie motor.

[Res7]

I never said it would work well.
But it is short as and would prolly sound pretty.
whats the ebay store?

[debaser]

http://stores.ebay.com.au/asian-concept-thailand

[Res7]

Cheers mate.

[BANDITROD]

ok so i have just got an email back from them saying that they will soon have clutch masters aswell as brakes and also said that these were brembo copie's not genuine but claim they are just as good as the genuine artical so its a gamble but i am gunna buy one and check it out you never know it just might be alright and i will do a report for ya's all when i get it they also said that parts were available

[Large]

quote:Originally posted by chopiesel

the catch is they prob work half as good as the m/c on my ktm.


The catch is you're risking your life on a 25$ chinese master cylinder.

And those cunts cant even keep poisonous chemicals out of baby milk[V]

[BANDITROD]

he he he its ok i will test them out

[latheboy]

I have no problem with stuff made in China... They have the best machinery and great technology, the problem is western dipshits who have no QC and just want to pump out lots of product fast and cheap .... There are some awesome robotics,biotechnologies,auto and fuck knows what else coming from china in the last few years... T3/T4 turbo's that cost $100AUD that are as good as Garretts, how could you go wrong .. Having said that i myself have NEVER used one thats just what i've seen in a friends car...

[Deano]

have heard that the chinese turbos tend to break the compressor housing in half. they have a what looks like a joinin them as i believe they are machined as halves an then glued together. they need to use a better glue.

[debaser]

I have assembled a few Chinese motorcycles. Virago 250 clones quads etc. Where the jap's would have a nice solid clamp or bracket they will have some dodgy plate. Or in one case weld the bars to bracket. I had the opportunity to get off a new Yammy virago and straight onto a chinese copy and it felt all wrong, levers wobbled bouncy shocks etc etc.

It is either their quality control or their interpretation of quality that is wrong. The quad I worked on was a banshee copy with an old oil cooled xr honda copy engine. They leaked, broke easy and would not turn over. Wiring needed replacing some of the castings where sharp as razors. The hyosungs aren't much better as far as casting.

I am keen to get a few of these thai parts and have a good look at them. The dash I ordered is the same model advertised in local magazines and websites for 500 ish. I paid less than half that delivered. If I can get a decent pair of rear sets for 200 why pay 1200.

If I was putting a m/c from these guys on my bike I would be stripping it first and having a good look at the seals etc.

[03gixxerpilot]

another question is do they have provision for a brake light switch,

[BANDITROD]

yes they even come with a switch

[Res7]

Now we just need the matching clutch and i'm in.
Been fretting about the cost of good looking controls.

[Jay_G]

if you can wade through the shit these american stunt kiddies seem to be impressed
http://www.stuntlife.com/forums/2-stunt-discussion/213280-60-brembos-should-i.html

I might do a bit more looking into getting one over.

[debaser]

http://www.asianconceptthai.com/content/image/-20080202-155040.jpg

These look alright I am trying to negotiate ordering a couple without having to spend 2000 I might just order 2000's worth and ebay it, it is all cheap as.

[Res7]

At least it is a pair.
Do you know how much they go for?
I would prolly be interestad in buying off you.

[BANDITROD]

^^^^x2

[debaser]

Have a look they have brembo bits all sorts of shit. But only a few bits on ebay?

[Fight_fan]

Do they do hydraulic clutch set ups too? I'd get a pair for sure, they look tidy!

[Davekwaka98]

I was just on the phone to a friend who lives in bangkok who loves bikes hes gunna see what prices he can bargain for I'm sending him $1000 for bits I'll let yall know how I go.[8D]

[Brodie]

If anyone wants to hop onto ftp stunts/servin it up aus...and have a look for the thread on these ebay bike bits.... (cant link you sorry at work got to work, yeah yeah hahaha) You will see that the hit MISS ratio is skewed very definatively towards the MISS. lol. I think the thread is under FREMBOS LOL. FAKE BREMBOS.

All of theirs broke, were shoddy.... inferior peices of crap. Not one person out of about 7 had a good experience with them... I would seriousuly consider how much your limbs are worth lol... if its $25 cool.... lol

Just another two cents worth from someone who has seen a lot of buy this shit and a lot of unhappy campers ;)

[Davekwaka98]

Wont go near the brakes'n shit but I just got told by friend in Bangkok anythin they got I can get for 1/2 price again so them levers n dashes are look'n good cant get that rx1n dash in syd for $120 new for that price I'll buy both dashes they got a trail style one to thanx for that debaser nearly bought my dash from aus:D:D

[Ross_247]

Sounds to dodgy to be true...

[Davekwaka98]

The brakes are but the dashes are the same as in aus I'll try the levers just for the fuck of it.

[BANDITROD]

they are fucking me around abit all they keep saying is buy the brakes now and when we have the clutch masters we will let you know so i am abit suss as to whether they are even getting them in

[zx12argh]

As for quality from China- you still get what you pay for... The only thing you can really save on in china is labour - its a 10th of what it is here. I deal daily with manufacturing issues in the China and the general philosophy is unless you specify everything to the nth degree they will always make assumptions that can cut costs. You can get some great work out of China - they can be quite innovative in their manufacuturing techniques - but you just have to have a lot of control over the product.

I don't reckon you can trust anything that is that cheap - the surface finish and annodising will be crap and who knows what material they are using - its probably recast scrap aluminium.