Gixxer subframe question

[AK47]

http://www.streetfighters.com.au/forum/upload/934114442175783.jpg

Gday guys. Does anyone know if I can fit a K1 (or 2, 3, 4 or whatever) tail to my 98 SRAD 750? And if so, I assume I have to swap round the subframe as well? Will the subframe bolt straight up to the SRAD frame? The look the same to me, just wondering about mounting points etc...[^]

[AK47]

http://www.streetfighters.com.au/forum/upload/934114442357586.jpg

[Blackkat]

it will if you want it badly enough.

[_M_]

Just looking at the pictures you've provided i would say that it wont be bolt on but will be pretty close, the lower arms are different lengths so you'll need to shorten the k1 etc. arm, by the looks.

Find the dimentions of bolt size, distance apart, etc. and compare by the looks it shouldn't be too much different, though that is based off pictures.

google the k1 etc. and you should be able to find the dimentions, or ask for the dimentions on gixxer.com etc.

[AK47]

...I was just hoping for a straight swap.

[AK47]

or does anyone know of an easy (read cheap) tail mod for the SRAD? I wanna get some girth out of her arse.[xx(]
Somethin with a pillion on?
Thanks guys!:D

[Iceman]

Chris, anything is possible, it just depends on the amount of mucking around you want to go to. Take some measurements of your SRAD where the subframe bolts on and head down to your local bike wreckers with your measuring tape. You might be surprised what you find.