pappas
12-05-2008, 09:39 AM
Took my top triple clamp, risers and new Bars over to Ben (Exben) at Extreme Creations on Thursday for him to put it all together. All I can say for anyone thinking of drilling them yourself think again unless you've got a fairly set up workshop.
To do mine Ben had to machine off the speedo mounts, drill and tap a new single 10mm hole into the risers to replace the 2 bolts arrangement my risers had as they were to wide for the triples then put helicoils into the risers, also drilled and tapped a new hole to put a bracket for a new speedo.
Saved so much time and fucking around!
Big thanks to Exben!
Oh and was lucky enough to meet Large while I was there....can't figure out why he's called Large though!?
To do mine Ben had to machine off the speedo mounts, drill and tap a new single 10mm hole into the risers to replace the 2 bolts arrangement my risers had as they were to wide for the triples then put helicoils into the risers, also drilled and tapped a new hole to put a bracket for a new speedo.
Saved so much time and fucking around!
Big thanks to Exben!
Oh and was lucky enough to meet Large while I was there....can't figure out why he's called Large though!?