View Full Version : Swingarm length request
evilkarl
05-05-2008, 04:00 PM
Wondering if anyone out there with a early model 86,87,88,89 GRSX1100 could do me a favour and measure the length of thier swingarm.
I need the measurement please from centre of the mount on the frame to the end of the arm.
http://networkz.net.au/swingarm.jpg
1988 GSXR-1100
About 627mm could be 1-2mm either way, was in a bloody awkward position up against the wall due to no front end at the mo
That measurement doesn't include the adjuster thickness
evilkarl
05-05-2008, 05:22 PM
Cheers Bladehunter.
STM77
05-05-2008, 06:09 PM
Measured one on bench. Overall length 620 mm, and 555mm from leading edge of rear axle slot to pivot end of swingarm. That was on a 89 1100(k)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.