zxr 320mm discs and speedo cable

[slingy88]

Ok guys, I am collecting parts for a front end upgrade.
So I am after some 320mm discs off a zxr. Think they were used on the 400, 600, 750, and 900 and had a 13mm offset. Plus I am after a speedo cable to suit a ZX600F wheel, though I presume all the mid 90's zx/zxr's would use the same threaded fitting so would be ok.
Cheers guys

[slingy88]

Ok, so think I have sorted a speedo cable. Found a NOS part for the right money as long as it's long enough. Just on the hunt for discs still
Cheers all

[Yella]

I may have some in the shed will do some digging and measure up

[slingy88]

Cheers Ian, that would be great

[Hagarr]

Ok guys, I am collecting parts for a front end upgrade.
So I am after some 320mm discs off a zxr. Think they were used on the 400, 600, 750, and 900 and had a 13mm offset. Plus I am after a speedo cable to suit a ZX600F wheel, though I presume all the mid 90's zx/zxr's would use the same threaded fitting so would be ok.
Cheers guys

Yep I got some but second hand of course.

You know you can buy S3 Performance Discs for $100 right?

[slingy88]

The cheapest I have seen are the Chinese wavey style ones for about $230 a pair. Not sure how good they. Where are these S3 discs available from? But I am happy with second hand as money is always tight, and I still need to get a muddy and some ally for new headlight mounts etc.
Your discs in usable nick hagarr? I

[Hagarr]

The cheapest I have seen are the Chinese wavey style ones for about $230 a pair. Not sure how good they. Where are these S3 discs available from? But I am happy with second hand as money is always tight, and I still need to get a muddy and some ally for new headlight mounts etc.
Your discs in usable nick hagarr? I

Certainly not warped or bent, maybe a whisker, .40mm undersize at worst wear point.

i would use them again in a heartbeat!

[slingy88]

So how many munnies would it take to obtain such cardiac banging shiny circles?

[Hagarr]

So how many munnies would it take to obtain such cardiac banging shiny circles?

Who me??

[slingy88]

Who me??

Yeah, sorry man. I am interested in the disc's if you want to part with them and the price is agreeable.

[Hagarr]

Yeah, sorry man. I am interested in the disc's if you want to part with them and the price is agreeable.

You can have the discs but always remember who you got them from :)

Anything to trade?

you'll have to arrange freight from your end, I'm pretty sure I've got suitable packaging.

Sorry for delayed posting I used to be on here daily but since farcebook don't check everyday.

Text me is probably quickest or best option. 0448526271

[slingy88]

Wow. Thanks Haggar, that's brilliant!
Been flat out the last couple of days with nieces wedding. But, that's all over now, so back to propper buissiness haha.
Right, stuff I have to trade;
Bandit ignition switch
Bandit clutch cover
Bandit sprocket cover with clutchslave
bandit fuel tap, fuel gauge senderand fuel filler
Bandit seat plastics and tail tidy
Bandit grab handle blank off's
Gsxr 750m clutch cover
Zx600f 300mm discs (a little ridged)
Vfr 800 mirrors
Bandit PAIR blanking plates

[Hagarr]

Bandit sprocket cover with clutch slave
bandit fuel tap, fuel gauge sender and fuel filler
Gsxr 750m clutch cover

:)

Oh and maybe ignition switch if it will modify to fit mine

[slingy88]

:)

Oh and maybe ignition switch if it will modify to fit mine

Done, Pm or txt me your address and ill get them sent along with a satchel for the return of the discs ;)

[Hagarr]

You have them yet?

[slingy88]

Just got a ticket in the mail box for pick up today, but didn't have a chance to collect it today.should get there tomorrow.

[slingy88]

Just picked them up.Brilliant, thanks for your help with this. Can now start piecing it all together :-D