V-Twin fighter...maybe

Some years ago I bought a VTR1000 from a shop. On the way home the motor stopped on me. Turns out it had very little oil in it (about 300ml) and of course this was my fault cause I should have checked it before I jumped on it. Anyway put a new motor in rode it around for 3 years and sold it again. So now I have this 1000 V-twin sitting in my shed looking like this...


http://www.streetfighters.com.au/forum/upload/52425394747415.JPG


Now I was told that I had spun the main bearings. Too me this didn't sound like a big deal but that is why I am posting...to ask if motor can live again?

I cannot see lots of damage but I am not overly mechanically minde so I will post some pics of what I think might be areas of concern. Mostly just the blueing off of area's around the bearing where it has obviously got hot.

http://www.streetfighters.com.au/forum/upload/52425394736587.JPG

http://www.streetfighters.com.au/forum/upload/52425394732201.JPG

[Bear]

Get the crank machined and whack in over-sized bearings, if they make them(?)
Could or should get the crank balanced while you're at it.

Cheers, I will look into it. Just need to source some carbs and she'll be right.

[03gixxerpilot]

bullfrog i have a vtr 1000 in pieces, i havent got it down to the crank yet but can do so if you like, i also have a set of carbies as well for it, basicly i have the whole dam thing in pices, so if you want something let me know and i will see what i can do for you

Might have to catch up with you at AFR if you are going and see what we can do?