chopiesel
09-07-2015, 12:00 PM
Ok it's a bit sad but I think it has to go.
Iv spent countless hrs and $$ on this thing over the years but it's sat collecting dust for the last 3. I flat out don't have time to even think about it. I'd rather someone snap up a bargain and finish it.
I'll try to list everything.
98 model bike engine has 3000 Km after rebuild.
Carrozeria wheels 18x8 rear 250 rear tyre Avon.
Jmc swing arm mega over and under bracing 2" over with 6" adjusters
Billet grips chromed
Chromed rear sets alloy
Bitubu rear shock
Polished buss forks with billet top caps
Modified gixxer tail section with glass race tail
Alloy gas cap
Alloy chromed switchgear
Alloy levers
Alloy brake and clutch res
Alloy sprocket cover
Alloy see thru clutch cover with billet pressure plate
Cbr thou front gaurd
Front offset sprocket
Glass headlight surround.
Stock headers which need modifying
Alloy re usable oil filter
Alloy starter cover
150 link chain
Chromed brake calipers
Prob stuff iv left out.
Bike is basically complete. No front discs. Or dash.
The tail is a crappy race one and needs some glassing and sanding done.
I have all the wiring but it was lengthen in a hurry for afr in dubbo years ago so will need sorting out.
Not sure if I have the radiators as I was going to get a small one made.
Over the years iv picked at the nuts and bolts box but it's esensislly held Together with 6mm bolts anyway. All the main bolts for engine mounting and stuff are there. I replaced all the engine bolts with stainless items.
The frame has been heavily modified by Ben at ex creations.
All holes filled. Air intakes smoothed. Rad hose hole in left side smoothed over. Cut out and re plated to allow for offset sprocket. All un used brackets smoothed off.
Some die grinder work still required to get chain to miss frame. Clutch slave cylinder needs spacing out and a new longer pushrod made. Overflow res needs sorting too.
I'll answer any questions as I'm sure I'm missing stuff or leaving stuff out.
I want only $6500 for a fast sale.
I'll upload some pics later from my computer
Iv spent countless hrs and $$ on this thing over the years but it's sat collecting dust for the last 3. I flat out don't have time to even think about it. I'd rather someone snap up a bargain and finish it.
I'll try to list everything.
98 model bike engine has 3000 Km after rebuild.
Carrozeria wheels 18x8 rear 250 rear tyre Avon.
Jmc swing arm mega over and under bracing 2" over with 6" adjusters
Billet grips chromed
Chromed rear sets alloy
Bitubu rear shock
Polished buss forks with billet top caps
Modified gixxer tail section with glass race tail
Alloy gas cap
Alloy chromed switchgear
Alloy levers
Alloy brake and clutch res
Alloy sprocket cover
Alloy see thru clutch cover with billet pressure plate
Cbr thou front gaurd
Front offset sprocket
Glass headlight surround.
Stock headers which need modifying
Alloy re usable oil filter
Alloy starter cover
150 link chain
Chromed brake calipers
Prob stuff iv left out.
Bike is basically complete. No front discs. Or dash.
The tail is a crappy race one and needs some glassing and sanding done.
I have all the wiring but it was lengthen in a hurry for afr in dubbo years ago so will need sorting out.
Not sure if I have the radiators as I was going to get a small one made.
Over the years iv picked at the nuts and bolts box but it's esensislly held Together with 6mm bolts anyway. All the main bolts for engine mounting and stuff are there. I replaced all the engine bolts with stainless items.
The frame has been heavily modified by Ben at ex creations.
All holes filled. Air intakes smoothed. Rad hose hole in left side smoothed over. Cut out and re plated to allow for offset sprocket. All un used brackets smoothed off.
Some die grinder work still required to get chain to miss frame. Clutch slave cylinder needs spacing out and a new longer pushrod made. Overflow res needs sorting too.
I'll answer any questions as I'm sure I'm missing stuff or leaving stuff out.
I want only $6500 for a fast sale.
I'll upload some pics later from my computer