Gitzy's GSXR

[Gitzy]

So my old man came around for dinner last month and left with a toothpick and the R1.... And because I'm super original I've gone from the R1 to a Gixer just like Jules :-) I was aiming at a 92-99 Blade but this came up and I've always loved this model.

As they say LET THE MADNESS BEGIN.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/20150620_103710_resized_zpshwcedlwh.jpg

[K6Thou]

'03-'04 ? Looks like a tidy example mate.

[nick76]

Looking forward to this.
Good stuff gitzy

[Large]

Are you going to make it into a crane?

[Weaselman]

First of all nice project.
Second I don't have a bike atm so your a bastard.

[Gitzy]

Yep K3..

Good suggestion Rich and maybe..

Soz Weasel..

[Weaselman]

Go retro.
Bug eyes and a stubby RGV tail.

[Hagarr]

Get rid of that fucken huge cigar would be my first target, phew that's a doozie!

Good Luck and do it how YOU want it!

[wackyrider]

haha, Nice one Gitzy. So what's the plan with this one?

[geesexar]

get stuck into it mate...cant wait to see the progress

[hooligan]

I'm thinking red and white paint, maybe some skulls...

[Gitzy]

Maybe a brutale tail??? Lol

Nah probably same plan as R1 keeping it simple and clean I'm not to creative.

[hooligan]

Get a race RSV4 tail. They are sexy.

[wackyrider]

Well, I've got my hands on a Ducati subframe for an upcoming project :D

Too bad i sold the carbon tail a few years ago. Doh!!!

[Watto]

Hang on to the panels if you can Gitzy was the only year they did the copper as a limited run

I had a mt03 headlight mount on mine with the gauges mounted off the back - it's in my posts somewhere

Tre, +2 on the back and velocity stacks make a nice improvement (also a nice pipe is much better than the cannon) I had a Nikko hipipe on mine which gave a nice note - Yoshis with the oval outlets sound good to

[Azrael]

Big fan of that model and colour, get into it!

[peter187]

I've got one of these. Awesome motors. Wheelies for days. Interested to see where you go with this.

[Gitzy]

So since NFR is like a month away and Russ has inspired me to pull my finger out to actually do something I went on a bit of a shopping spree.

I'm cheapin out for now and just modifying the top yoke, so some risers and bars were the first thing..


Scar ebay jobbies were on the menu..
http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/Risers_zpsdwumjhwq.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/Risers_zpsdwumjhwq.jpg.html)

I thought I'd lash out on the bars though and not do the usual renthal fatties I had on the R1 so I went ABM Superbike bars in Black..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/ABM Bars_zpscmcck2le.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/ABM Bars_zpscmcck2le.jpg.html)

Good old bar end mirrors were the go to I have a thing for them

http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/Mirrors_zpsxm7sdrw9.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/Mirrors_zpsxm7sdrw9.jpg.html)

Also went for some Renthal road race grips never tried em but heard they were alright.


http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/Renthal_zpsawldpner.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/Renthal_zpsawldpner.jpg.html)

[Gitzy]

Extended lines were in need to so goodridge will do the trick.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/Brake%20Lines_zpsjrg9cyjp.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/Brake%20Lines_zpsjrg9cyjp.jpg.html)

Because I'm a lanky fucker I found these riser/lowering plates for the rearsets so 1" back and 1" down to maybe make it a lil bit more comfortable.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/Plates_zps4zyfprbg.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/Plates_zps4zyfprbg.jpg.html)

[Gitzy]

Also purchased some new spark plugs, air filter, oil filter etc etc.. give her a little freshen up ready for NFR..

And went for this headlight unit, I've always liked them so I thought why not..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/Headlight_zpsklewj5hg.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/Headlight_zpsklewj5hg.jpg.html)

[hyofighter]

nice parts list there gitzy , what ya doing for the dash mount ?

[Gitzy]

I think I'll strip off the tupperware on monday after work Scotty and see what I'm working with, get the bars mounted etc then just go full retard with the tig and some stainless rod and plate and see what I come up with.

I have to make a new exhaust hanger bracket anyway so I'll tackle it when I do that. How's this for handy, I was digging around the shed last night and opened my locker looking for an unrelated part and found my Blueflame duel outlet exhaust I had on the Bandit years ago. Boom 4 bolt mount up.. sweet free exhaust..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151010_145158_zpshjs4jvrr.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151010_145158_zpshjs4jvrr.jpg.html)

[Gitzy]

On a side note, see the black smudgy bit on the mid pipe? it was a melted rubber type stuff I'm slowly getting it off with some scotch brite, soapy water and elbow grease but its making the titanium go silver..

I know nothing about titanium so my question is when I remove the black stuff and its all silver if I stick the oxy down the mid pipe will the heat make it colour back up??

[xa-mont]

https://www.youtube.com/watch?v=6KxmxwO5w4c

[Gitzy]

Kind of a silly question now I think about it.. Cheers Trav.

[Gix11]

Good stuff Gitzy, love the motivation. By the way, I have those Oberon bar end mirrors and they are a serious pain in the arse. They are fully clamped with hex grub screwes so you can't adjust as you ride. You will spend hours getting them set up and set. If you leave them slightly open on the grub they slip and even then, you only have lateral movement. They do look good though.... :)

[Gitzy]

Nothing like NFR looming to kick you in the arse Si, them mirrors are actually el cheapo $28 I did put a set of Oberon ones on the R1 and know exactly what you're talking about though. I have these cheapys on the bandit and DARE I say I actually think they're better quality than the $160 Oberons.

[Gitzy]

Play time has begun.... there's not much on the front end when all the tupperware is gone, even minimal wiring, I dig this..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/2015-10-12%2017.51.08_zpspofkm2ax.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/2015-10-12%2017.51.08_zpspofkm2ax.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151012_185431_zps57qyfryp.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151012_185431_zps57qyfryp.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151012_185740_zpsaiq5ofs0.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151012_185740_zpsaiq5ofs0.jpg.html)

[Gitzy]

The rad temp sensor is a little pokey out the front, so good ol Acewell make an inline temp sensor that I can mount behind the radiator so it's a bit more out of the way.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/ACE-KA24KIT1_zps3ufhpaaa.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/ACE-KA24KIT1_zps3ufhpaaa.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/ACE-KA24KIT_zpszuijl3v1.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/ACE-KA24KIT_zpszuijl3v1.jpg.html)

[hyofighter]

What did you decide with the steering dampener drama

[hooligan]

I have one of those I could have given you, gitz.
It has an extra nipple underneath that I added for my Vfr, though.

[Gitzy]

Not sure yet Scotty, I do ride like a bitch so I'm not sure I'll miss it. I'll wait till the headlight arrives to see where it sits. It might fit.

Bugger Chris, not to worry it's in the mail now anyway so all good.

[Gitzy]

I took the top clamp of today to reroute the switchgear wiring and throttle cables etc..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151018_151932_zps5aflvoye.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151018_151932_zps5aflvoye.jpg.html)

I'm cheaping out and just drilling the original yoke but I'm pretty sure one of my holes will end up smack bang on the S logo which is inset I f I remember Jules' job.. so I had some of this liquid steel stuff in my tool box and thought I'd give it a go apparently good to grind/drill/etc. We'll see shall we.. so I roughed it up and packed it in..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151018_140338_zps7abs4pb5.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151018_140338_zps7abs4pb5.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151018_141316_zpstfi95nhw.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151018_141316_zpstfi95nhw.jpg.html)

[xa-mont]

why didn't you just weld it you mug... you're a boily for a reason :P

[hooligan]

but the epoxy putty gets him hard in 15 minutes...

[Gitzy]

But then it would have sat in my toolbox for another ten years Trav and I just couldn't have that lol.

[xa-mont]

hahaha. i know that feeling

[Gitzy]

Pulled the front calipers off yesterday to give them a good scrub and maybe a coat of black caliper paint.

Also pulled off the rearsets tidied them right up and refitted with the lowering plates, came up a treat and should give me a little more leg room. Fitted a new brake clevis too from vandriver left over one from the TL collection.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151024_224419_zpsyfsfxpfm.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151024_224419_zpsyfsfxpfm.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151024_224450_zpsaxehvcrz.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151024_224450_zpsaxehvcrz.jpg.html)

[Gitzy]

Risers came in the post today, drilled them bad boys and now we have some funbars..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151026_183605_zpshrnuld40.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151026_183605_zpshrnuld40.jpg.html)

[Nudie]

Damn, I'd better pull my finger out!

[Gitzy]

Crack on Russ!!

Gave the top clamp a lick of pint last night should be ready to refit after work and put on switchgear grips etc..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151026_204333_zpsvp3m3s4a.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151026_204333_zpsvp3m3s4a.jpg.html)

Also cleaned the calipers right up and was going to go black caliper paint but after I taped em all up I started to think maybe leave them gold?? not sure yet.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151026_204608_zps8stqiezg.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151026_204608_zps8stqiezg.jpg.html)

[BANDITROD]

gold looks good mate

[Gitzy]

Yeah might leave em gold for now Blaster, they're a bit pitted from 12 years of use but they're in pretty good nick..

Fit all the business bits today.. the renthal grips were a bitch to get on, very very tight I ended up snapping the little locating pin on the starter switch gear fucking pain in the ass like 2 mins after I drilled the bar and fitted it too..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151027_180701_zpsv7ylu4dn.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151027_180701_zpsv7ylu4dn.jpg.html)

[hyofighter]

I use hairspray to get my grips on they just slide on nicely whilst its nice and wet then the next day there set and ive never had a grip move after . Compressed air gun is also a good one for getting them on too just the tip of the gun under the lip trigger wide open and just slide them on

[hyofighter]

Shes looking the goods anyways gitzy

[Gitzy]

Cheers Scotty, I use a spray bottle with soapy water it's never been an issue putting grips on, they slide straight on then dry etc you know the drill but these renthal road/race grips were way too small on the I.D. the left side went on ok but the throttle side no dice.
I had to slice off the raised edge from the Suzuki plastic throttle and all the ridges along it actually come straight through the grip.

[Gitzy]

Had a fiddle today with the air intakes, nothing too fancy, just make a template for the mesh cut some staino mesh stick it in with some selleys clear, run a bead around the rubber mounts and reaply to frame..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151030_133334_zps6srosg2c.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151030_133334_zps6srosg2c.jpg.html)

Also fitted the Rad and Oil cooler Guards.. bit more protection now..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151030_144005_zpsuf9swgvt.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151030_144005_zpsuf9swgvt.jpg.html)

[Gitzy]

The mask arrived in the post today to.. drilled some holes to fit the headlight. Just need to fab up some mounts...

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151030_144114_zpsdgysooxu.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151030_144114_zpsdgysooxu.jpg.html)

[Large]

Good good.

What's the mask?

[Gitzy]

Its a Pleiadescustomz , Shop in Turkey Rich..

https://www.facebook.com/search/str/PleiAdes%2BCustomz/keywords_top

[Gitzy]

Here is the back of the headlight, the bolt and nut setup works well to adjust the mask independently of the light itself..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151103_074156_zps69fyqtoz.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151103_074156_zps69fyqtoz.jpg.html)

Knocked up this little bracket this morning, very simple but it will do the trick very nicely..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151103_074240_zps4swhqkpu.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151103_074240_zps4swhqkpu.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151103_074538_zpsycmivukv.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151103_074538_zpsycmivukv.jpg.html)

When it's painted it should blend in and not be overly noticeable..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151103_074655_zpsymq6oez0.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151103_074655_zpsymq6oez0.jpg.html)

[Gitzy]

In case you were wondering what it bolts to, there are two nicely tapped holes in the lower triple for a plastic scoop thing from when the fairing was fitted.. so that's quite handy..

Pic for ref.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/triplebase_zpsgoioorui.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/triplebase_zpsgoioorui.jpg.html)

[Gix11]

Nice! Good work Gitzy.

[Nudie]

You shit me with your good fabricating skills! The crap I make looks like a blind retarded sea otter had his first go at welding.....

[hutch]

looking good mate

[Gitzy]

You shit me with your good fabricating skills! The crap I make looks like a blind retarded sea otter had his first go at welding.....

cheers Guys, and Russ that's how I feel driving an excavator so you got me there Lol.

[Nudie]

cheers Guys, and Russ that's how I feel driving an excavator so you got me there Lol.

If only I could make a living driving an excavator....





oh wait

[Barra58]

You shit me with your good fabricating skills! The crap I make looks like a blind retarded sea otter had his first go at welding.....

Ditto for me!

Bike looking sexy, air intake with that mesh is great.

[wackyrider]

Looking good mate. That h'light bracket isn't gonna snap for you now is it. haha

[ozzy1100]

looks great, look better in ally giggles

[Gitzy]

Lol nope not gonna snap anytime soon, def better in ally buuut since I can't really see it to appreciate it and front end weight isn't an issue for my lady like riding skills this'll do.

So I got home yesterday and it fit a treat but the flat position of the actual headlight plate maxed out the adjustment for the headlight so it was too high up so time for mark II bracket, just had to angle the plate down 38 degrees and voila.. took the opportunity to make it a bit better shape too cos why not..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_062230_zpsozi1cejk.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_062230_zpsozi1cejk.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_071059_zpsv6faxv3y.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_071059_zpsv6faxv3y.jpg.html)

[ozzy1100]

Mrk2 much cooler

[BANDITROD]

if it was me I would try to hide the bracket a lot better instead of it being square try making it v shaped to still make it ti the bolt holes if that makes sense then it would be hidden

[Gitzy]

Look up a post or two Rodney :p ^^^

New one fits a treat, obviously needs paint.. etc..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_171219_zpsewljd3al.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_171219_zpsewljd3al.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_171735_zpswlqzkduk.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_171735_zpswlqzkduk.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_171821_zps1e72hqvv.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_171821_zps1e72hqvv.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_171956_zpsnbirjfmh.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_171956_zpsnbirjfmh.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151104_171913_zpsdvjic9wk.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151104_171913_zpsdvjic9wk.jpg.html)

[BANDITROD]

oh coolI didn't see that pic hahaha

[Gix11]

Mk3 would be to have the light mounting plate adjustable with bolts, unless you reckon you have nailed it for angle first go?

Oh, and also, (I'm sure you have this covered) beware of solid mounting. Vibration will rattle globes and other things apart, not to mention the vibration noises. I have learnt that the hard way over the years. A bit of rubber should save the day.

[ozzy1100]

A bit of rubber should save the day.

Not a truer word spoken......

[hooligan]

I hate it when everyone can hear my vibrator noises.
I mean, vibration noises.

[Jed]

Looking good Gitzy.

You keeping the tail ??? Would you like a single seat full carbon one ??? I have one on my K2, but am looking for a pillion one so I can throw my lady on the back. I'll do a trade :)

Cheers, Jed

[Bob]

Looking good gitzy

[Gitzy]

Indeed rubber will be involved Si :-)

Nah keeping then seat Jed soz.

[Gitzy]

Made some little indicator brackets to fit the headlight..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_122326_zpsua6v4pxl.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_122326_zpsua6v4pxl.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_130959_zpszggad5th.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_130959_zpszggad5th.jpg.html)

[Gitzy]

Purchased some MAB's from bunnings, MAKE A BRACKETS never heard of em but pretty handy if you want to shape something..

The gauge bracket will have to wait this one will do for now for NFR.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_131027_zpsapknha0f.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_131027_zpsapknha0f.jpg.html)

I will however make a new exhaust bracket this one is just temporary.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_133611_zpsnvawmukw.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_133611_zpsnvawmukw.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_133629_zpsu0mydbix.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_133629_zpsu0mydbix.jpg.html)

[Gitzy]

Also the ol water bottle trick worked for 6 years on the R1 so I thought it will do the trick again here..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_144211_zpsk4rgixx8.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_144211_zpsk4rgixx8.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151108_144233_zpskwxqwggh.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151108_144233_zpskwxqwggh.jpg.html)

[Gix11]

err...... Do you think that those exhaust hanging brackets will late more than a couple of K's mate?

[wackyrider]

err...... Do you think that those exhaust hanging brackets will late more than a couple of K's mate?

I'll second that...

They're not gonna do much. Bit of vibration and I reckon they're gone

[Gitzy]

I will however make a new exhaust bracket this one is just temporary

Peoples peoples read between the piccies..

This'll hold I reckon.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151109_072205_zps5elwpqyg.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151109_072205_zps5elwpqyg.jpg.html)

[Gitzy]

Hang on I see my error in my own quote, I meant template not temporary..

[hooligan]

i use them on my bike for heaps of stuff. Usually for things that don't weigh much though.
I have the pre made right angle pieces as part of my bracket for my oil cooler, has been fine for maybe 5-10 000ks.
depends which way the load is being distributed.
Gitzy's template exhaust hangers brackets aren't definitely better than mundy's balsa wood dog bones.

[Gix11]

Template makes more sense! :) I thought you meant temporary just for this ride and you'll sort it after NFR. What surprised me more was that it was on YOUR bike! Engineer par excellence doing this!? :)

[Gitzy]

Lol my bad. the new chunky ones will be plenty stronger than ze template now.

I got super motivated last night at around 9pm and went and routed all the wiring and fitted my freshly painted things.. punches out a fair bit of light I'm thinking because its a slender headlight anyway and the only thing disrupting the beam is between the "eyes" so the beams are pretty straight forward unobstructed.

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151109_230619_zpsyv0bxyvo.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151109_230619_zpsyv0bxyvo.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My%20GSXR/20151109_230703_zpsosbe0vcz.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My%20GSXR/20151109_230703_zpsosbe0vcz.jpg.html)

[ozzy1100]

Oh I don't mind that at all

[geesexar]

lookin good mate

[Gitzy]

Took her out for a lap today, goes to be expected like a scalded cat. Ready for NFR Yippy Kiyay Bitches..

http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/20151110_163253_zpsj0ifblgg.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/20151110_163253_zpsj0ifblgg.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/20151110_163300_zpstkb88plw.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/My GSXR/20151110_163300_zpstkb88plw.jpg.html)

[Bob]

Looks good gitzy

[rod185651]

Looks good Gitzy



http://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/20150620_103710_resized_zpshwcedlwh.jpghttp://i1359.photobucket.com/albums/q786/gitzyfighter/My GSXR/20151110_163253_zpsj0ifblgg.jpg

[Simo74]

In a word....Quality

[Gitzy]

Cheers guys, bit of a rush job for NFR should be better with paint and a few more mods.