Starting on 96 zx6r build

[bluedrags]

I will be picking up a 96 zx6r soon and wonder if anyone has any ideas.
If anyone knows what set of usd forks fit easy as I'm going change them and maybe swing arm I'm open to any ideas.

[Weaselman]

If Your going to sell the front and rear end let me know. I want to put em in my GPZ

[bluedrags]

I will be looking at getting rid of front end as I want to fit usd fork on off what yet I don't know.
What from the front end do you want weaselman and I'll let you know if I'm selling that part.
http://i305.photobucket.com/albums/nn209/bluedrags/th_8a86763c992057a7fa6e1177bb5dd6ce.jpg (http://s305.photobucket.com/albums/nn209/bluedrags/?action=view&current=8a86763c992057a7fa6e1177bb5dd6ce.jpg)

[Weaselman]

Entire front end.
Forks, yokes, wheel, brakes, disks, front fender everything. Also the front master cylinder.
Rear wheel too If you dont want it with cush drive, disk and sproket.

[bluedrags]

I can do forks, brakes,fender and front cylinder don't have rear wheel.
I'll need steering stem from yokes to try to fit to usd yokes it get?.
Once I get them off I can send pictures if you want.

[Weaselman]

Cheers that'd be good

[bluedrags]

Here's some pictures of stuff
http://i305.photobucket.com/albums/nn209/bluedrags/th_be0a2caee15b7fd90106f414521a370d.jpg (http://s305.photobucket.com/albums/nn209/bluedrags/?action=view&current=be0a2caee15b7fd90106f414521a370d.jpg)
The front guard will need plastic weld around mounting area as cracked
http://i305.photobucket.com/albums/nn209/bluedrags/th_219e5e7e4407717af8222d79548dd1f5.jpg (http://s305.photobucket.com/albums/nn209/bluedrags/?action=view&current=219e5e7e4407717af8222d79548dd1f5.jpg)
Pm if interested and I fly out Monday for 2 weeks just in case you want them before that and what sort of price you looking at.

[bluedrags]

I'm looking at changing rear swing arm as well would you be interested in something like that as well if I do.

[bluedrags]

Can anyone tell me fitting a different swingarm to bike like what I should be looking at and if it's a not a wide on pivot point would it be ok to spacers made up.
Is there a trick to lining up and measuring for spacers any help or pictures would be great.

[ozzy1100]

Can anyone tell me fitting a different swingarm to bike like what I should be looking at and if it's a not a wide on pivot point would it be ok to spacers made up.
Is there a trick to lining up and measuring for spacers any help or pictures would be great.

arrrr the age old question.......... how long is a piece of string
wider pivot isnt always a prob
here is a zrx 1100 arm i did for a zephyr 550 while on the bike with some bar, tool steel and a hand drill

https://www.youtube.com/watch?v=OcY_GKH14jw

https://www.youtube.com/watch?v=aF_ykCFze6o

https://www.youtube.com/watch?v=a4shSYxSz2o

things like pivot to wheel center ( can be changed within reason )
wheel wigth for chain run ( only big issue is frame clearance to trye in realation to chain wigth other issues can be machined most of the time)
shock type and mount all can be changed within reason
and a few others, but follow yr noise and keep a few steps ahead of yrself and its not really a hard job and some
arms basicly fall into some bikes

[ozzy1100]

btw to yr ? spacers if done right should be no problem

[bluedrags]

Thanks ozzy1100 I'm thinking about putting a 2008 GSXR 1000 Swingarm onto my 1996 zx6r and with a ruff measurement the zz is 225mm and ax is 230mm or I could go a 1996 GSXR1100 that is 230mm but I like the 2008 one better what the best way to shine that out.

[ozzy1100]

I forgot to say pay attention to axle dia's of both pivot and wheel. No prob bushing if done with thought

[bluedrags]

I'm in the middle of swapping my 96 zx6r for over to 94 zx9r usd forks but the stem from the 9 is a bit larger then the 6 factory one.
I have emailed a few places around about bearing swaps but no good and I was wondering how would fitting brushes in the 9 tree to be able to fit the stem from the 6 would go.
I have tried looking on net for info but I'm not having much luck so I was wondering if anyone has done this or have advice on what's good material to use and if it's even worth doing as I want something that's going to be safe.

[ozzy1100]

Stem steel or ally and what is the diffrence in dia

[bluedrags]

not sure but away for work at the moment but there's a good few mm.

[bluedrags]

Does anyone know where I can get a quote for getting a triple tree stem machined up to suit build?.

[Gix11]

If I was in your shoes right now , the first 3 people I would think to contact would be:

Ben Shaw at Extreme Creations (Exben on here) - NSW
Lynton (Ozzy1100 on here) - QLD
Ivan (Latheboy on here) - VIC

[JimZXR]

What length and diameters do you need to make it fit? I only ask as I have some ZXR750 parts here that may fit?

[bluedrags]

Im taking to ben this week to get done thanks.
But could be interested in what parts you have could you pm list and prices.