My first project. Triumph Sprint RS

[grotegeert]

Hi,

This is my first project and i have to learn on the go.
The pictures are telling the story.
I am now starting with the tail and i need a lot of advise to compleet this stage
I bought a subframe of a street triple 2010
The last pictures show how i think i can mount it.
I am not sure if i am on the right track
Who can help me?

61776178617961806181618261836184618561866187618861 89

[grotegeert]

The seat and fairing are ordered and on the way

[Deemo]

I can't help with advice but I can cheer on, good on ya for having a go. I'll be watching ur progress

[The Phantom]

Welcome to ASF.

Looking at a 2010 Street Triple, the subframe lower mount attaches well forward of the rear of the tank:

http://i124.photobucket.com/albums/p24/zrxman01/2010%20Triumph%20Street%20Triple%20R/2010TriumphStreetTripleR1.jpg

Perhaps you could cut the lower mounts off and weld them back on about 100mm further back (guessing here), then make additional brackets that go from the lower main frame mounts, up past the newly relocated lower subframe mounts, and to the upper subframe mounts?

http://www.streetfighters.com.au/attachment.php?attachmentid=6189&d=1413794133

Quick hack job with MS Paint, but you get the idea - red lines where the bracing bracket would go:

https://farm9.staticflickr.com/8586/15088120674_dfdc5d6cc7.jpg