What is your new Project?

[rod185651]

After reading Damo's thread I asked myself this very question.

I am pretty sure it will be a Kawasaki, or I would love to do an 80s air cooled motor bike.

What about you guys?

[Redmohawk]

With what I have going on personally atm , trying to stick to the ones I have (I'd like to get some finished before I start any more)

[Large]

Coupla Katanas

[xa-mont]

Vfr 1200 is my next planned project

[hyofighter]

onto some thing at the moment hopefully it comes through and if thats a goer id like to turbo it , or ill make that a everydayer and put that amr supercharger on the vfr for shits and giggles

[ozzy1100]

Same one that I havnt really started for
7 yrs........ 1503cc zephyr

[Gitzy]

I have plans for a new exhaust and headlight on the R1 .

Also keen to blow the dust off the XR and Street Tracker it .

take this..

http://i.imgur.com/czPGb3P.jpg

and turn it into something like this... No not turn it into a DR. but you get the point..

http://i.imgur.com/fb90e6p.jpg

[xa-mont]

you should turn it into a DR

[nick76]

Also keen to blow the dust off the XR and Street Tracker it .
I got one for sale...incase you wanna swap the parts over....lol
Pity Im not in the city...im sure some skinny jeans wearing trendy woulda bought mine off me by now....

[Gitzy]

Lol does that mean I have to wear skinny jeans if I convert it?.

Don't suppose annyone recognizes the tank on the DR by chance?

[Gix11]

Could be anything, but looks like an old CB or GS tank to me.

[xa-mont]

not xs400 is it? http://i.ebayimg.com/00/s/NDgwWDY0MA==/z/hvkAAOxyJ59RHfwv/$T2eC16hHJHEE9ny2tll!BRHfwu39WQ~~60_35.JPG

[Gix11]

Nice call Trav.

[Jockney Rebel]

DT175 1980s its in the garage and awaiting a whole lot of work its a runner i bought for 150 bucks lol

[Tony Nitrous]

Got a GSXR1100G under a dust sheet waiting for a motor,
Got enough Busa bits that they look like an engineless rolling bike,
Got a '99 Mk1 Bandit I'm not sure what to do with.
Got an ET that need minor jobs to the carbs and wireing.

Take you'd pic from them!

Not touching the others that are in one piece and go!

[veetwo tls]

Well its been 6 yrs with out a streetfighter & i got the bug for one again.

After having my 07 KTM950 Superenduro rallye raid bike now for 6yrs. it's basically cost nothing in reliability problems except my personal mods to the bike.

So i've decided to build another fighter but i'll be cheating with this one as it's almost a fighter anyway KTM1290R superduke race kitted.


been out of touch for some time with body work can someone post me some links please. i've notice angry guys site is gone :(



cheers:

[MDM]

A new project? Jeez, I ain't got the old one finished yet...

[wackyrider]

KTM 1290.... nice...

[hooligan]

My brother is planning on getting a 1290 as well. Brilliant choice for him as he doesn't modify, except for changing indicators/headlights or chucking on a slip on.
My first project will be to finish my current VFR project. Although it been going since 2011 so far...
The other project will be to steal my brothers keys at some stage.

[veetwo tls]

My brother is planning on getting a 1290 as well. Brilliant choice for him as he doesn't modify, except for changing indicators/headlights or chucking on a slip on.
My first project will be to finish my current VFR project. Although it been going since 2011 so far...
The other project will be to steal my brothers keys at some stage.


im ordering the race setup , run a moto hooligan air box kit , until Chris @ Consentino Engineering comes out with his yummy performance gear for it & for light fairing thinking on the SHOWY "Spawn" with a phillips slim ballast HID kit & front fender SM "Zick" or the GEMO "Blade"

http://www.streetfightersinc.com/Fairings.htm




For you FCR lovers here is some of chris's work (what i run in my KTM 950 superenduro rallye raid with a 1/5 throttle & only single pull cables NO PUSH)

http://i974.photobucket.com/albums/ae228/bgoodeno/MY BIKES/12026Cosentino063_zps668d6eec.jpg (http://s974.photobucket.com/user/bgoodeno/media/MY BIKES/12026Cosentino063_zps668d6eec.jpg.html)

[hyofighter]

my next project , dazza's yzf currently on its way to its new home now , not sure what the plan is till i sit it in the shed have a good stare at it over a few jacks and cokes and the imagination kicks in

http://i1087.photobucket.com/albums/j477/hyofighter/yzf_zpsded9356e.jpg (http://s1087.photobucket.com/user/hyofighter/media/yzf_zpsded9356e.jpg.html)

[ozzy1100]

im ordering the race setup , run a moto hooligan air box kit , until Chris @ Consentino Engineering comes out with his yummy performance gear for it & for light fairing thinking on the SHOWY "Spawn" with a phillips slim ballast HID kit & front fender SM "Zick" or the GEMO "Blade"

http://www.streetfightersinc.com/Fairings.htm




For you FCR lovers here is some of chris's work (what i run in my KTM 950 superenduro)

http://i974.photobucket.com/albums/ae228/bgoodeno/MY BIKES/12026Cosentino063_zps668d6eec.jpg (http://s974.photobucket.com/user/bgoodeno/media/MY BIKES/12026Cosentino063_zps668d6eec.jpg.html)

I tae it you like his lastest two wheel drive project lol

[veetwo tls]

I tae it you like his lastest two wheel drive project lol

not really my thing 2wd but the R&D went into it is awsome work though.

[ozzy1100]

not my thing ether but did like the way he goes about things

[veetwo tls]

No fighter but little tricked out just a few things been done to her & lot ain't pictured

sold the TLs streetfighter
been fucked up last couple yrs tried snap myself in half in a work related fall have few carbon fibre & Ti trick bits in my spine learnt to walk again now throwing the leg over the bike again baby steps but getting there - dam got that fighter bug again & it's Orange.


shout out
Anyone building a KTM1290 superduke fighter ? love see some pics hear some ideas.








Present ride.

72337234723572367237723872397240724172427243724472 45724672477248724972507251

[Gix11]

Shit mate, sounds like you screwed yourself up big time. Good to see you back though. I'd like one of them 1290 as well. Saw a fair few at the TT and damn they grab your attention.

7253

[veetwo tls]

Yeh Gix11 fucked up pretty good like said to most rather broken my arms & legs than my back just in pain wise was like someone hitting your spinal nerve with a cattle prod droping you to your knees all time sweat pisssing out fighting the paine till it reseads, it fucken hurt - what happens when you take your mind off the job thinking of tea (dinner) brake. fell 5 mtrs onto my ass compressed my spine S1 S2 L4 L5 went through the usual quarter zone injections in the spine no difference , then nerve end burning in the spine lasted 2 weeks all this time for 1 yr sleeping on a tile floor on my guts all i could do had home help nurse type thing , then after 12 mths finally major surgury they found shattered 2 x vertebrae & 2 x discs , now got 2 x carbon fibre vertebrae
2 x imitation discs with a cage wrapped around them & Ti support rods either side. actually gained an inch in height. had learn to walk got through that rehab quick was determined but got few side effects but getting there , almost off the morphine except weather changes kills me need drop few tabs. nephews gave me the opportunity get in the work force again sitting in one his pine excavator harvesters & forwarders seems ok on the back "sitting better than standing no weight on my lower spine & hips" just waiting for a Sec32 payout that will pay for the 1290R then the modding begins.

[Mr Ed]

Good on ya , mate. You put some of us to shame.

[geesexar]

jeez mate good to see you back on track...and nice KTM

[veetwo tls]

jeez mate good to see you back on track...and nice KTM

Cheers geesexar

[kev@vcm]

I like this thread but i wont be doing any bike stuff as im.taking a few yrs off to do some traveling the biggest project i have is my workshop constantly doing up grades and buying more leather work equipment

[safighter]

Wow i dream about having a few bikes to work on when you run out of ideas on one move to the other maybe when the 929 is finished ,only drama with the 1290 at the moment with the ozzy dollar the way it is they have gone up,will have to have a south ozzy catch up boys

[xa-mont]

here's my next project... well after i get the RSV back on the road.

7256

It's going to be my new tard. going to be black on black on black everything... with more power than i know how to use. And a few custom billet bits of goodness just to keep the machinist in me happy.

[hutch]

that blue 1290 that Si put up is no more

[ozzy1100]

Start of the next project, a phase 4 z1r prody racer one a few we hope
to next years Barry sheene festival of speed.

http://i1136.photobucket.com/albums/n493/ozzy1100/FF67E758-3973-4AA6-BA00-54A5875BB8AB_zpsvaemm9jn.jpg (http://s1136.photobucket.com/user/ozzy1100/media/FF67E758-3973-4AA6-BA00-54A5875BB8AB_zpsvaemm9jn.jpg.html)

[xa-mont]

haha. nice start.

[Barra58]

here's my next project... well after i get the RSV back on the road.

7256

It's going to be my new tard. going to be black on black on black everything... with more power than i know how to use. And a few custom billet bits of goodness just to keep the machinist in me happy.

nice bit of background yoot there, if yours, i'm much jealous, is it XC or as in your sig an XA?

[ozzy1100]

haha. nice start.

Only a few pieces to add but dymags are always a good start lol

[Gix11]

that blue 1290 that Si put up is no more

Do tell...........

[ozzy1100]

Side new project, first of three frames I have here to straighten
only problem is I have to build new jigs to be able to do so
http://i1136.photobucket.com/albums/n493/ozzy1100/428F2D82-5B39-41D0-A17B-3AAF61FC466E_zpswj9fjkln.jpg (http://s1136.photobucket.com/user/ozzy1100/media/428F2D82-5B39-41D0-A17B-3AAF61FC466E_zpswj9fjkln.jpg.html)

[hutch]

hit a car at the bottom of the freeway in Adelaide early morning wheelieing car didn't see lights and pulled out from junction Dave passed away

[ozzy1100]

Sad news

[Mr Ed]

What???? Sad news indeed.

[safighter]

Holy shit thats fkd up .

[Gix11]

Shit, that's not a good end to that story. Shame.