Yella
26-11-2013, 06:20 PM
Im adding a dry nitrous kit to my busa SWB. Never worked with NOS before. 48HP shot fitting a PerformanceFirst Cycles (https://www.facebook.com/PerformanceFirstCycles?directed_target_id=33410495 0054608) spray bar, 2 dial progressive controller, EFIR, power commander for fuel and nitrous activation. 80% throttle 8000rpm triggers. I have read/been told heaps of different information about set up, so questions are.
1. How much timing should I pull.... Rule of thumb is 2 for 50 but have been told everything from 0 to 4 . I am thinking 1
2. Spraying in first, I was going to start at 50% and ramp over 2 sec. Is that over kill? do I even need to ramp. remembering bike is SWB
1. How much timing should I pull.... Rule of thumb is 2 for 50 but have been told everything from 0 to 4 . I am thinking 1
2. Spraying in first, I was going to start at 50% and ramp over 2 sec. Is that over kill? do I even need to ramp. remembering bike is SWB