Vfr800 swing arm

[triplefighter]

Hello I have a 94 cbr900 I had bought a 2003 vfr800 single sided swing arm it doesn't fit does anyone have some advice I've heard of people using them cheers

[K6Thou]

From memory the 800 arm is wider at the pivot than the 750 arm which is what I think most people use in their blades. It could be made to fit but it would involve some mods to the arm. My advice would be to call Ben at extreme creations, he'd know for sure...

[Fight_fan]

Yep, get a 750 arm or throw moneys at it!

[latheboy]

Read this, lots of pics missing but you will get heaps of info.

http://www.streetfighters.com.au/forum/showthread.php?3823-CBRRRT-s-Shed.-(Index-on-page-1.)

[GIXXER1100W]

I have the 750 arm (I think, see photo below) if you want to buy it.

Bought it to convert my gixxer but have found myself with hardly any time to ride my bike now with kiddo on the way.

was going to do an ebay shed clean up but have got no time to catalog it. 170 bucks + postage ONO.

http://imageshack.com/a/img832/5190/kgrhqjhjbqfezmj8ycbrnso.jpg (http://imageshack.com/i/n4kgrhqjhjbqfezmj8ycbrnsoj)Uploaded with ImageShack.com (http://imageshack.com)

[FIGHTERMC]

that's the wrong 750 arm gixxer1100w
he needs 93 to 97 as the lug on the bottom for the linkage is
the same as the blade and ur one is the earlier model and no good.

[FIGHTERMC]

Hello I have a 94 cbr900 I had bought a 2003 vfr800 single sided swing arm it doesn't fit does anyone have some advice I've heard of people using them cheers

if ur not afraid to get the grinder to the frame and swinger
you can make the 800 arm fit.but the 750 is way handier to fit.
it so happens i'm just after fitting one to my new
long term project blade. only reason an 800 arm is in it
is I got the frame and swinger for 190 euro.