Genisis take 3

[pommie02]

I am finally fed up with carbies and faster 600's
so the fzr is coming of the road for a new refit..
the shopping list is quite big :-
fuel injection, possible turbo
quick action throttle
dump the nitrous
the big refit starts this weekend...sO Ill post up some pictures of the build

[zx12argh]

all going to be ready for fools run?

[LKC73]

Whats the bike look like now? Can yo post a pic of her up now, and then while your going along we will see progress.

[pommie02]

Its been a while since I updated this ..
the bike is finally running on injection.
project so far.
GSXR 750 throttle bodies $120...ebay
fuel pump...$130
microsquirt..$500..
tech edge wideband controller...$250.
pipes and fittings..$120.
new inlet rubbers $60
beer $?????
I will post up some pictures, and if anyone is interested i will share this new black magic.
oh and one last thing..thanks to evad and his mate Ian for the support and help

[evad]

Thats great:D:D
Yep, ian's the gun, he has helped me a huge amount!!
Got your e mail, Ill send you one of my alpha-n msqs today. You will have to adjust your required fuel tho as you have bigger injectors but you should be able to sort thaqt out pretty quickly with the wide band. Have you got a palm yet? Its easy to use Mslv's ve analyser and set up the target AFR table.:D

[fimpBIKES]

wheres the pics???

sounds like you've done well, is the turbo still in the works?
(this place has gone turbo MAD)

[pommie02]

The turbos on hold for now $$$$$$$
i think shane wants to race me.....
i will race him if he takes two spark plugs out...or only uses one arm, and 1st gear

[pommie02]

http://i120.photobucket.com/albums/o195/pommie02/DSCF1481.jpg

[fimpBIKES]

thats the future alright!!

will there be an airbox?

[Stocky]

You should pull the secondary throttle valve shaft out and JB weld the holes up.

Then you can fit the velocity stacks inside the upper part of the thottles and sleeve them back to a good tapper or closer to parrellel.

[Stocky]

Like this

http://www.streetfighters.com.au/forum/upload/44612492180082.jpg

http://www.streetfighters.com.au/forum/upload/44612492185958.jpg

[87fzr]

what size nos were u runnin,do you want 2 sell ur setup?i have a 87 fzr 1000 that im in process of fighterin.

[pommie02]

Nice install..... the stacks are just for now, i am making a plenumn chamber at the moment, i will have a side air intake...ready for the turbo.

as for the nitrous...its already sold, you build one for about $500.
if you are interested i can pm you the details and how to do it. i had 170 hp at the back wheel with a 60 hp shot

[Booster]

Watch your side entry on a turbo plenum, ends up with uneven mixture requirements in transition to boost.

[pommie02]

there isnt a lot of room once the tank is on, i only have a gap of 20mm to play with. i know i have to get it as central as possible

[Booster]

Whats clearance like on the rear?? how big is your plenum ?? i thought the FZR had a reasonable size airbox std, ?

[pommie02]

there is no room to go forward, the plenum is going to be 75 x 75 mm box. the gap between the throttle bodies is about 20mm, i intend to use a rectangular section to give me the side exit. with the plenum and 55mm tubes connecting it i will have just over 2ltrs of volume.
being a streetfighter, i had to move alot of the bikes electrics, coils, cooling pipes and now my control unit...there inst much room left in the frame

[87fzr]

yeah would be great to get sum details off you,did you mod motor much to run it, how did motor cope?thanx for any advice. dale

[pommie02]

http://www.streetfighters.com.au/forum/upload/610883292131065.JPG

[pommie02]

http://www.streetfighters.com.au/forum/upload/610883292148468.JPG

[pommie02]

As you can see...the bike still looks pretty much the same. but now i have my intake on the side, quick action throttle, pull cord stop cable, wideband controller for the fuel injection and a sigma speedo.
i have started to tune it....it goes hard, real hard.
not quite a busa turbo, but a close second best.
now for part 2....the turbo is going to happen. im thinking remote mounted, intercooled

[Cruisecontrol]

Bring those lights down and in and you are on to something. [:p]

http://www.streetfighters.com.au/forum/upload/61088338742652.JPG

[pommie02]

But then i wouldnt be able to look at myself while i am riding.
as you can i only have one mirror

[image]

quote:Originally posted by pommie02

there is no room to go forward, the plenum is going to be 75 x 75 mm box. the gap between the throttle bodies is about 20mm, i intend to use a rectangular section to give me the side exit. with the plenum and 55mm tubes connecting it i will have just over 2ltrs of volume.
being a streetfighter, i had to move alot of the bikes electrics, coils, cooling pipes and now my control unit...there inst much room left in the frame

[image]

Hi Pommie02

Absolutely no idea where that last post came from --- just registered and the cyber elves posted that at random for me ;->

I run a lightweight single seater race car in the Hillclimb and Sprint Champs here in Scotland powered by a tuned FZR1000 --- I'm just about decided to go for fuel injection via Gixxer750 TB's.

As you seem to have done just that (with the exception of my wanting to use the Megasquirt for the ecu) I'd be grateful for any pointers (what year TB's -- probs with fuel system mods etc) as your end result looks the biz and if I can avoid obvious mistakes along the way it'll help my budget and sanity.

Regards

K

[pommie02]

http://i725.photobucket.com/albums/ww253/pommie002/jan2009174.jpg
i have finally decided to make a few changes, so heres take 4.
the bike also has a new name, the wife chose waste of money.
but i liked chimera better, its a beast that is able to change it form

[Surt]

hi gary, i think if u don't have enough space for a bigger plenum 'coz of the tank, u coud just relocate it to the center of ur bike or under the arse. noice stacks, are those stocky? rgds [}:)]

[Surt]

meanin' to make a new tank mate ;)