PDA

View Full Version : Crank rebuild


OLD SKOOL BANDIT
18-09-2013, 09:42 PM
Can anyone point me in the direction of someone who can do a crank rebuild on the GT380 triple ? Needs big end bearings and 2 sets of bearings, one either end of shaft.

http://i1090.photobucket.com/albums/i369/got_buckleys/8F275080-8829-4B0E-9B24-00D9E18A75EC-11636-0000014D23E2B5FF_zpsb42b67e8.jpg
oldskool
18-09-2013, 09:48 PM
Mick Hone.
I may be able to get a better price if you like.
OLD SKOOL BANDIT
18-09-2013, 10:21 PM
Mick Hone.
I may be able to get a better price if you like.

That would be good if you could hook me up. Scotty reckons Steve at A1 is capable too? What you think?
oldskool
18-09-2013, 10:37 PM
I'll make a call.
stiffsimon
18-09-2013, 10:56 PM
If you luck out there mate there's Billy at Rex Wolfendens place who's a crank maestro
OLD SKOOL BANDIT
18-09-2013, 11:23 PM
If you luck out there mate there's Billy at Rex Wolfendens place who's a crank maestro
Heidelberg?
stiffsimon
19-09-2013, 06:58 AM
Yeah T Rex racing
OLD SKOOL BANDIT
19-09-2013, 03:09 PM
Just been invited up to a secret location where a bloke has 3 tonnes of Zook Smoker parts !! Fucken pissing my pants I'm so keen to go !! He reckons he has every part for every old 2smoke suzuki ever built !! Sounds like heaven to me !!
oldskool
19-09-2013, 04:51 PM
Ok apparently the nigga in the know for triple smoker cranks is
''Joe'' at Southern Jet ski centre
2a Peace street
Springvale
9562 3066

Tell him Mick Hone sent you.
probike
19-09-2013, 06:22 PM
Yeah T Rex racing Bill's not a Rex's he does his stuff at home I have his number if you need it
TurboKat
19-09-2013, 07:36 PM
Just been invited up to a secret location where a bloke has 3 tonnes of Zook Smoker parts !! Fucken pissing my pants I'm so keen to go !! He reckons he has every part for every old 2smoke suzuki ever built !! Sounds like heaven to me !!
Pick us up a couple of RG 500 motors while you're there will you?
stiffsimon
19-09-2013, 07:38 PM
Any X7's up for grabs and I might be interested
OLD SKOOL BANDIT
19-09-2013, 07:59 PM
I'll do a reckie and see exactly what he has then we can line him up for a bulk buy discount. I hope one day to have a collection of all GTs plus an AP50 all in Maui Blue.
OLD SKOOL BANDIT
19-09-2013, 08:01 PM
Ok apparently the nigga in the know for triple smoker cranks is
''Joe'' at Southern Jet ski centre
2a Peace street
Springvale
9562 3066

Tell him Mick Hone sent you.

Cool, cheers maximus. Springdale is nice and local to work. Could be the go. Anyone have an idea what it might cost?
OLD SKOOL BANDIT
19-09-2013, 08:04 PM
Bill's not a Rex's he does his stuff at home I have his number if you need it
Thanks, might give the bloke in Springvale a call first and see what he says.
Redmohawk
19-09-2013, 11:58 PM
Anything under $700 for a tripple is a good price, without a jig its an all day job to get spot on for someone that knows there shit. With a jig 3 or 4 hours assuming they are good at what they do.
wackyrider
20-09-2013, 12:29 AM
Any X7's up for grabs and I might be interested

Hey, hold on... I'm looking for an X7.

out of nostalgia mainly as i used to own one
stiffsimon
20-09-2013, 06:37 AM
Likewise Jules. I had a red one it was my first ever road bike . I swapped an RM 250 C for it. I loved that old smoker
Redmohawk
20-09-2013, 08:58 AM
there was an X7 at the last Bendigo swap meet (runner in need of resoration) you could have had it for $300
stiffsimon
20-09-2013, 11:04 AM
Bugger :mad:
wackyrider
20-09-2013, 05:00 PM
It was the second bike that I owned. First was a TS125ER (Trail bike), then got the GT250X7. Fun little bike