skunkworks

[ozzy1100]

That would have been nice and light to move around! Another score for Lynton. That's a good score card you've got there mate.

Fork lift onto trailer then round bar under to roll off onto trolly
weighs in at just under 300kg but was surprisingly good.
I need all the scores I can get looks like over $700
just for the top of lift jig table. Ex top bike frame in shed
has finaly been given the green light for its mods so can't wait
around for a piece to turn up :-( mind u ends up I work for free
and use his cash for the bits to build his bike, at least I end
up with more cool toys.

[sharky]

The quote I heard today was too good not to share.......

"Look at my workshop" says Lynton to girlie....

"Cute" she says..."Do they make them in man size too ??"

[ozzy1100]

The quote I heard today was too good not to share.......

"Look at my workshop" says Lynton to girlie....

"Cute" she says..."Do they make them in man size too ??"

you sir shall be dealt with.....

[ozzy1100]

Ready to start the chop on the table top
this is going to get ugly reall fast

http://i1136.photobucket.com/albums/n493/ozzy1100/6EFFF0A9-6E06-42A1-8D2C-31BC94A494CB_zpsjf3l5cwf.jpg (http://s1136.photobucket.com/user/ozzy1100/media/6EFFF0A9-6E06-42A1-8D2C-31BC94A494CB_zpsjf3l5cwf.jpg.html)

[ozzy1100]

Short back and sides

http://i1136.photobucket.com/albums/n493/ozzy1100/846C11CC-8778-432A-9D48-E23B5AB68FFB_zps5zq8agij.jpg (http://s1136.photobucket.com/user/ozzy1100/media/846C11CC-8778-432A-9D48-E23B5AB68FFB_zps5zq8agij.jpg.html)

Pauly plate on the super trailer for the win
2600x900 12mm biz 350 top for the lift table I just chopped the top on

http://i1136.photobucket.com/albums/n493/ozzy1100/7E22BAB0-2A0A-4366-8FD0-7752DEC0906F_zpskoscjlps.jpg (http://s1136.photobucket.com/user/ozzy1100/media/7E22BAB0-2A0A-4366-8FD0-7752DEC0906F_zpskoscjlps.jpg.html)

Long weekend lets hope I get some shit done :-(

[ozzy1100]

Run the hydroblaster the first time doing some testing
One could say I'm well pleased with the results

http://i1136.photobucket.com/albums/n493/ozzy1100/E3514022-D67A-4A32-B14D-A2745BF4967E_zpsrecv441s.jpg (http://s1136.photobucket.com/user/ozzy1100/media/E3514022-D67A-4A32-B14D-A2745BF4967E_zpsrecv441s.jpg.html)

Every body should have one :-)

[Tony Nitrous]

No.

Everyone should have a mate with one ;-)

[ozzy1100]

Bring money I can be anyone's mate lol

[wackyrider]

Well, the engine of the CB could do with a clean...

[ozzy1100]

There is no better finish on a air cooled mate

[Tony Nitrous]

Well, the engine of the CB could do with a clean...

Yeah, with dynamite.... ;)

There's a good "fix" for an old Honda.... :cool:

http://i57.tinypic.com/25qvj3q.jpg

[wackyrider]

Hey, came by at the right price, so wasn't gonna say no

[ozzy1100]

That is a nice fit in there tony

[Tony Nitrous]

Yeah, doesn't look bad. Don't mind the bodywork on the CB900's.
Seen a few oil cooled lumps in old Zeds but not normally stuffed in the Honda's.

[ozzy1100]

and the honda donk is a lot more fragile than the zed, also the z and suz air cooled are well better surported go figure

[Tony Nitrous]

Performance, reliability, less embarrassing to be seen on, it's all win!

http://i58.tinypic.com/29cw2f5.jpg

[ozzy1100]

Performance, reliability not if you know what your doing...
less embarrassing well pot kettle black and all that lol

[Tony Nitrous]

Bring money I can be anyone's mate lol

Still got a few more box's of this 30 year old shit to sort through and work out
what I'm using and I'll try and get a list together.....

http://i59.tinypic.com/11akhfn.jpg

[ozzy1100]

You know I do engine work now as well hehe

[Gitzy]

Hey Lynton I thought of Felix the Fixture Table a few weeks ago I was at Wollongong TAFE for a Training Camp, they just spent $11.5 Million on a refurb in the Metal Fab and Fitting & Turning Depts. I got to use one of the three Demmeler Tables they have, not sure if the head teacher was exaggerating but he said the tables were $29k and the tool racks were $10k. They were the bombdiggity to use.

http://www.leussink.com.au/new/images/demmeler-parts-list.pdf

http://www.leussink.com.au/files/Demmeler%20Brochure%20-%20Applications%20V2.pdf

http://i1359.photobucket.com/albums/q786/gitzyfighter/Various/20140617_164243_zpsedb66049.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/Various/20140617_164243_zpsedb66049.jpg.html)

http://i1359.photobucket.com/albums/q786/gitzyfighter/Various/14278150438_cd8034cc22_o_zpsc5cdbd16.jpg (http://s1359.photobucket.com/user/gitzyfighter/media/Various/14278150438_cd8034cc22_o_zpsc5cdbd16.jpg.html)

[ozzy1100]

how fucking good is that.... mine wont be ground or as sterdy or as acurite but he wasnt wrong about the price of the Demmeler...
1200x900 strong hand is almost 8k...fuck
how did u find useing it?

[Gitzy]

I was using the 2000x1000 but they also had 2 of the 3000x1000, it was superb to use the machined surface was great to use with a vernier height gauge and the jig clamp system couldn't have been better just endless possibilities of setup with all the accessories in the tooling rack. If money wasn't an issue I'd have one in a heartbeat.

[ozzy1100]

I have never used one but ever time I looked at one
I just thought how good is that. Larry won't be in the
same class but do they even lift bro lol

[GammaBoy]

Run the hydroblaster the first time doing some testing
One could say I'm well pleased with the results

http://i1136.photobucket.com/albums/n493/ozzy1100/E3514022-D67A-4A32-B14D-A2745BF4967E_zpsrecv441s.jpg (http://s1136.photobucket.com/user/ozzy1100/media/E3514022-D67A-4A32-B14D-A2745BF4967E_zpsrecv441s.jpg.html)

Every body should have one :-)

Shiny!
wanna do a set of cases? :D

[ozzy1100]

Why not we done enough kwaka parts so far
got to pay for this fucking thing some how lol

[ozzy1100]

http://i1136.photobucket.com/albums/n493/ozzy1100/20F88B34-B511-450E-8620-B844E90C9ABA_zpsnx7qlrtr.png (http://s1136.photobucket.com/user/ozzy1100/media/20F88B34-B511-450E-8620-B844E90C9ABA_zpsnx7qlrtr.png.html)

I'm going to update the blog when I'm not so titts busy
But here is a teaser, Felix is starting to flex his mussels

[ozzy1100]

http://i1136.photobucket.com/albums/n493/ozzy1100/0E930567-EA92-413C-8B3B-56812056ECBD_zpszk73pfsg.jpg (http://s1136.photobucket.com/user/ozzy1100/media/0E930567-EA92-413C-8B3B-56812056ECBD_zpszk73pfsg.jpg.html)
http://i1136.photobucket.com/albums/n493/ozzy1100/A3E21B57-3CB8-47CF-8733-F41D61E8A001_zpsrv91jzzh.jpg (http://s1136.photobucket.com/user/ozzy1100/media/A3E21B57-3CB8-47CF-8733-F41D61E8A001_zpsrv91jzzh.jpg.html)
http://i1136.photobucket.com/albums/n493/ozzy1100/5930E48D-18D5-4FDD-9421-A88601ABD1F7_zpsj5auhyj9.jpg (http://s1136.photobucket.com/user/ozzy1100/media/5930E48D-18D5-4FDD-9421-A88601ABD1F7_zpsj5auhyj9.jpg.html)
http://i1136.photobucket.com/albums/n493/ozzy1100/B59542D8-D457-44AF-8E37-35D7DE35E7D5_zpsuoni4cat.jpg (http://s1136.photobucket.com/user/ozzy1100/media/B59542D8-D457-44AF-8E37-35D7DE35E7D5_zpsuoni4cat.jpg.html)

Some more clean bits, thanks Jules for the pics

[xa-mont]

It does a killer job!

[ozzy1100]

It does a killer job!
That nice you need special time with the parts after you finished lol

[GammaBoy]

It does amost too good a job - reckon paint will stick to that? :P

[ozzy1100]

It does amost too good a job - reckon paint will stick to that? :P
Funny you say that, we have been expemiting with diffrent
processes and technics to suit the finish best suiting the part.
Eg we found ultrasonic give a better match on org z factory finish.
As for paint I myself have yet to try but from my information it works well.
I have found tho that after cleaning and the
surface finish that dosnt oxide its hard to want and paint them

[Tony Nitrous]

You recon you'd get an early GSXR frame in that cabinet ?

[ozzy1100]

Not without modification but I have seen a air lock type deal
that you do half and turn it around. At this point it is on the
end of a long list of things to do or if there is a reason to do it.
Wouldn't need to polish it not a bad idea tony

[ozzy1100]

Blog update on Felix
http://www.streetfighters.com.au/blogs/entry.php?76-The-rise-of-Felix-the-fixture-table....

[Gix11]

Good work on the blog Lynton.

[ozzy1100]

Thanks si

[ozzy1100]

more updates.......
as part of the upgrades I still needed to find a home for the machine tooling.
This gets rid of the machine trolly freeing up floor space but also I designed it so the lift trolly I brought and modified fitted under
the shelf saving space. The lift trolly was to save my back cause this shit is fucking heavy ( roatry table is + 50 kg )
Part of the reason the machine trolly was so heavy was it had round stock of the back of it as well. Solved by useing the dead space behind the mill while I was at it. I am pissed of tho I had to buy one lentgh of rhs, the rest is made out of left overs, scrap and salvage. Mind you most of this workshop is recyceled in some way.

http://i1136.photobucket.com/albums/n493/ozzy1100/B8B61346-C813-4F41-8AD7-C3AD88E8D5AC_zpsuzi67hzv.jpg (http://s1136.photobucket.com/user/ozzy1100/media/B8B61346-C813-4F41-8AD7-C3AD88E8D5AC_zpsuzi67hzv.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/509F7627-6383-4197-AC70-153C6E503010_zpstojfkxan.jpg (http://s1136.photobucket.com/user/ozzy1100/media/509F7627-6383-4197-AC70-153C6E503010_zpstojfkxan.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/ACF34434-4BBD-4841-8FD3-2FD7710B0080_zpsj0paegte.jpg (http://s1136.photobucket.com/user/ozzy1100/media/ACF34434-4BBD-4841-8FD3-2FD7710B0080_zpsj0paegte.jpg.html)

only cut it up a little bit I swear

http://i1136.photobucket.com/albums/n493/ozzy1100/F37A8284-F0A0-414B-AB5E-6FFA2AE9F0C5_zps5dua3qxa.jpg (http://s1136.photobucket.com/user/ozzy1100/media/F37A8284-F0A0-414B-AB5E-6FFA2AE9F0C5_zps5dua3qxa.jpg.html)

[ozzy1100]

Turn this
http://i1136.photobucket.com/albums/n493/ozzy1100/AFC8061E-80C5-4191-AFB4-32A6FB6E93FF_zps008ve9q1.jpg (http://s1136.photobucket.com/user/ozzy1100/media/AFC8061E-80C5-4191-AFB4-32A6FB6E93FF_zps008ve9q1.jpg.html)

To this
http://i1136.photobucket.com/albums/n493/ozzy1100/969D6674-5B08-4A96-BED9-A2423C7187A2_zpsobyuqsso.jpg (http://s1136.photobucket.com/user/ozzy1100/media/969D6674-5B08-4A96-BED9-A2423C7187A2_zpsobyuqsso.jpg.html)

Shinny

[GammaBoy]

So Shiny - tis a shame I'll probably be covering it in paint!

[ozzy1100]

At least the paint has a good surface to etch to now :-)
They aren't as pretty as the kwaka anyway
Joey marshal said u wanted to at the track today
was a top day

[GammaBoy]

Yeah, being stuck with only being able to get places on weekends when Bub is asleep really fucks up my ability to get shit done...
You got Ekka wednesday?

[ozzy1100]

Welcome to fatherhood lol
Try being a singal dad
I can normally organize to be home when I need to
Just txt me

[GammaBoy]

ok, will do.

[ozzy1100]

stage one is complete and blog updated, enjoy you ungratefull bunch of cheep fucks.... lol

http://www.streetfighters.com.au/blogs/entry.php?76-The-rise-of-Felix-the-fixture-table....

[ozzy1100]

Sneak peak at the next blog

http://i1136.photobucket.com/albums/n493/ozzy1100/9248D226-5426-4A0D-AFD8-FA1EA9B07ABA_zpsvmenit3t.jpg (http://s1136.photobucket.com/user/ozzy1100/media/9248D226-5426-4A0D-AFD8-FA1EA9B07ABA_zpsvmenit3t.jpg.html)

[Gix11]

Ooooo! Yes!

[ozzy1100]

It's not all grow up and uber kool bad arse bike building hero to giggle and turn
in little circles clapping like a school girl and giggling like a loon is it ?

[ozzy1100]

A bit better idea of what's up doc

http://i1136.photobucket.com/albums/n493/ozzy1100/62F4F48C-95E4-42E1-A9C5-821754768671_zpsi4pdnfdj.jpg (http://s1136.photobucket.com/user/ozzy1100/media/62F4F48C-95E4-42E1-A9C5-821754768671_zpsi4pdnfdj.jpg.html)

[GammaBoy]

Looks like enough room for a second engine.... :D

[ozzy1100]

Here's one we perpered earlier

http://i1136.photobucket.com/albums/n493/ozzy1100/0DC2881B-C7E3-4158-A0EA-582AA962A8FC_zpshtmvho7d.jpg (http://s1136.photobucket.com/user/ozzy1100/media/0DC2881B-C7E3-4158-A0EA-582AA962A8FC_zpshtmvho7d.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/999BE280-3864-4F94-BDAC-FFA3E45AE237_zpsvnanxgbv.jpg (http://s1136.photobucket.com/user/ozzy1100/media/999BE280-3864-4F94-BDAC-FFA3E45AE237_zpsvnanxgbv.jpg.html)

Funny thing both bikes are injected meth and will make around the same power
cause doing it diffrent ways

[MattyDucati]

Swell work man

[ozzy1100]

Thanks Matt

[ozzy1100]

Made this

http://i1136.photobucket.com/albums/n493/ozzy1100/9EEFC1C7-D11E-4CAF-A2B0-4F1320927B9E_zpslonnkela.jpg (http://s1136.photobucket.com/user/ozzy1100/media/9EEFC1C7-D11E-4CAF-A2B0-4F1320927B9E_zpslonnkela.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/A17F34F9-1866-4113-ABB9-32F25BD8E9FA_zpsltpxtmvw.jpg (http://s1136.photobucket.com/user/ozzy1100/media/A17F34F9-1866-4113-ABB9-32F25BD8E9FA_zpsltpxtmvw.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/1D48C07E-7641-4F8C-9A30-F358058F9B2C_zpszuhjlaqj.jpg (http://s1136.photobucket.com/user/ozzy1100/media/1D48C07E-7641-4F8C-9A30-F358058F9B2C_zpszuhjlaqj.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/9F92ED4F-5197-4981-89E3-D00C616FCB8E_zps1yqklup9.jpg (http://s1136.photobucket.com/user/ozzy1100/media/9F92ED4F-5197-4981-89E3-D00C616FCB8E_zps1yqklup9.jpg.html)

Because I have to start building this

http://i1136.photobucket.com/albums/n493/ozzy1100/F9DCC353-A885-4294-9F80-128DC6438484_zpszbrlhixx.jpg (http://s1136.photobucket.com/user/ozzy1100/media/F9DCC353-A885-4294-9F80-128DC6438484_zpszbrlhixx.jpg.html)

[Nudie]

Oh, so it's not a fruit press for brekky juice then? Shit I was way off.......

[ozzy1100]

i can see how the mistake can be made lol

[ozzy1100]

Machined the tops for my screw jacks
These will be used to clamp frames to the jig
table.

http://i1136.photobucket.com/albums/n493/ozzy1100/6150D427-A5FD-418A-8D8D-3BA9F3306786_zpsw095wmzw.jpg (http://s1136.photobucket.com/user/ozzy1100/media/6150D427-A5FD-418A-8D8D-3BA9F3306786_zpsw095wmzw.jpg.html)

[K6Thou]

Nice.....

you using HSS in the mill as well ?

[ozzy1100]

its all i have other than the tip face mill
hss works great on ally so not such a problem dan :-)
these will be another one of those tools made out of what ever I have laying around

[ozzy1100]

update on the screew jacks

http://i1136.photobucket.com/albums/n493/ozzy1100/99A0249E-7570-4200-A53C-7563AB9329DE_zpsy9n4o2tj.jpg (http://s1136.photobucket.com/user/ozzy1100/media/99A0249E-7570-4200-A53C-7563AB9329DE_zpsy9n4o2tj.jpg.html)

[ozzy1100]

first one of 12 steam pipe bases finished.
I have some 80x60 hollow bar coming ( :-( had to $ )
Ill use that to make some clamp flanges so the complte asemberly can be moved and clamped on the table
I had to buy a full length of steem pipe ( ouch ) so I have made this a set. I can use them a std and just make
the parts needed to do a spercific job.
these first ones are designed to hold tube from 20 to 60 mm and the use of the bearing and thread means I can raise and lower
its hight while the top and bottom are clamped ( I will machine a lock ring for each one )
The four top units can just screw into what ever high base you need ( min 80mm max 270mm )

http://i1136.photobucket.com/albums/n493/ozzy1100/78EECAEF-4181-4E94-A8F9-0CFB51069ED5_zpsz2ciwi1y.jpg (http://s1136.photobucket.com/user/ozzy1100/media/78EECAEF-4181-4E94-A8F9-0CFB51069ED5_zpsz2ciwi1y.jpg.html)

[ozzy1100]

In the midnight hr
http://i1136.photobucket.com/albums/n493/ozzy1100/DE49E5B2-2918-4E83-8905-EFD2C2AD892F_zpsjlfxde0p.jpg (http://s1136.photobucket.com/user/ozzy1100/media/DE49E5B2-2918-4E83-8905-EFD2C2AD892F_zpsjlfxde0p.jpg.html)

[ozzy1100]

good little soldiers

http://i1136.photobucket.com/albums/n493/ozzy1100/78002903-DCC7-4420-834C-5386EF003E30_zpsgw2c99sx.jpg (http://s1136.photobucket.com/user/ozzy1100/media/78002903-DCC7-4420-834C-5386EF003E30_zpsgw2c99sx.jpg.html)

[ozzy1100]

finished item

http://i1136.photobucket.com/albums/n493/ozzy1100/39030E53-1D43-4E51-ADC4-0EBA0CA3DC4D_zpsxqzdyo4f.jpg (http://s1136.photobucket.com/user/ozzy1100/media/39030E53-1D43-4E51-ADC4-0EBA0CA3DC4D_zpsxqzdyo4f.jpg.html)

they should work well

http://i1136.photobucket.com/albums/n493/ozzy1100/7792AD5A-8F40-452E-9D79-975BEFB6D0BE_zpsvwevbpz7.jpg (http://s1136.photobucket.com/user/ozzy1100/media/7792AD5A-8F40-452E-9D79-975BEFB6D0BE_zpsvwevbpz7.jpg.html)

[Watto]

nice mate the ingenuity of some fellas never ceases to amaze me

[Tony Nitrous]

nice mate the ingenuity of some fellas never ceases to amaze me

Sometimes you'd swear he has a grown up helping him,
but I've been and had a look, he really does do this shit on his own!

I'm starting to believe he might actually know what he's doing.

[ozzy1100]

Sometimes you'd swear he has a grown up helping him,
but I've been and had a look, he really does do this shit on his own!

I'm starting to believe he might actually know what he's doing.

Thanks lads,
I owe every thing I am to altered
states of mind....

[ozzy1100]

knocked this up tonight, i needed a way to project center line verticaly and this was the easiest way i could come up with

http://i1136.photobucket.com/albums/n493/ozzy1100/BEE82458-9AA0-4444-A4A2-3DFBEF2D57F7_zpspv10it7y.jpg (http://s1136.photobucket.com/user/ozzy1100/media/BEE82458-9AA0-4444-A4A2-3DFBEF2D57F7_zpspv10it7y.jpg.html)

[ozzy1100]

http://i1136.photobucket.com/albums/n493/ozzy1100/729109DD-19F7-4F43-BF00-004A2D63F6F0_zps0cbjgzvc.jpg (http://s1136.photobucket.com/user/ozzy1100/media/729109DD-19F7-4F43-BF00-004A2D63F6F0_zps0cbjgzvc.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/6D499212-91FD-492C-AC35-8659D7F90AF7_zpszo9g75yv.jpg (http://s1136.photobucket.com/user/ozzy1100/media/6D499212-91FD-492C-AC35-8659D7F90AF7_zpszo9g75yv.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/FB589596-4BBC-4A80-AE13-336814C9F528_zpsmliynz91.jpg (http://s1136.photobucket.com/user/ozzy1100/media/FB589596-4BBC-4A80-AE13-336814C9F528_zpsmliynz91.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/491D2E65-8BEE-4CCB-BC25-0FCB319C5BE4_zpsobf37fcf.jpg (http://s1136.photobucket.com/user/ozzy1100/media/491D2E65-8BEE-4CCB-BC25-0FCB319C5BE4_zpsobf37fcf.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/3832457C-7451-4701-BFE7-B2F77DEEAE4E_zps8mzkx5sf.jpg (http://s1136.photobucket.com/user/ozzy1100/media/3832457C-7451-4701-BFE7-B2F77DEEAE4E_zps8mzkx5sf.jpg.html)

[MattyDucati]

Whats the round thingy on the right side of the head??? no wait the left, on the intake cam????
spining the head has me all fucked up!

[stiffsimon]

You've done a good job with that wire brush mate looks almost as good as aqua blasting :)

[ozzy1100]

Whats the round thingy on the right side of the head??? no wait the left, on the intake cam????
spining the head has me all fucked up!

At some time in the past in its raceing life this
head drove a magnito of the cam. That's the mount capped off

[ozzy1100]

You've done a good job with that wire brush mate looks almost as good as aqua blasting :)

I tried a heavier median on this and it looks so good
you completely miss the three fins I welded plate into
to repair :-)

[K6Thou]

Hurry up !!! I want to see this finished. ha ha

[ozzy1100]

We will be there when we get there...
I mean it will be ready when it's ready...

[ozzy1100]

new blog is up
http://www.streetfighters.com.au/blogs/entry.php?79-Soup-kitchen-001

[ozzy1100]

sat night drinks..... i need medication to work this lot out in the right place....
this has had more in out action tonight than a $2 knock shop....
still loads more to do before I even tack into place, when its right i then have to take out
uprights to weld the remaining boss's and releave the over lap tube to clear. Once its welded
I will do the top and bottom new tubes

http://i1136.photobucket.com/albums/n493/ozzy1100/A50F6284-76E2-4B83-857C-F895F444A241_zpskz30nsby.jpg (http://s1136.photobucket.com/user/ozzy1100/media/A50F6284-76E2-4B83-857C-F895F444A241_zpskz30nsby.jpg.html)

[MattyDucati]

this thread should say NSFW, its getting a little sexual!

[ozzy1100]

this thread should say NSFW, its getting a little sexual!
Guess I should fuck around some more lol thanks Matt

[DCRacing]

Top Work Ozzy, I will have to drop in again

[ozzy1100]

Top Work Ozzy, I will have to drop in again

you should ride one of yr bikes down the hill

[ozzy1100]

rear cut welded up .... sooooooo much more to do

http://i1136.photobucket.com/albums/n493/ozzy1100/FE334D58-4AAE-4B69-B327-80AF04027BEF_zpsmr3a0lm0.jpg (http://s1136.photobucket.com/user/ozzy1100/media/FE334D58-4AAE-4B69-B327-80AF04027BEF_zpsmr3a0lm0.jpg.html)

[latheboy]

Needs more bracing :)

[ozzy1100]

Needs more bracing :)

but i like pretzels :-)
the next one will need it, it could be up to twice the hp smiles lol

[ozzy1100]

http://i1136.photobucket.com/albums/n493/ozzy1100/02243CED-9912-42CE-B04A-8A7D1820BF27_zps9rvhfb4y.jpg (http://s1136.photobucket.com/user/ozzy1100/media/02243CED-9912-42CE-B04A-8A7D1820BF27_zps9rvhfb4y.jpg.html)

[Gix11]

Everything becomes clear in that photo. You butter, that's cool as fuck!

[ozzy1100]

Everything becomes clear in that photo. You butter, that's cool as fuck!

thanks si, slow progress but starting to show some results

[Gix11]

By the way, that was supposed to be nutter not butter. Dickhead tablet bullshit.

[ozzy1100]

By the way, that was supposed to be nutter not butter. Dickhead tablet bullshit.
wait till you see one that might be in the pipeline old boy, will make this one seen a little bit tame :-)
and be happy u have a tablet i spend all my money on tools lol

[wackyrider]

Contemplated stopping past last night as I was heading back from Chinchilla. Was about midnight when i was going past and with the new road they've done, couldn't see the shed.

Ah bollocks, next time. Was probably too late anyways.

[ozzy1100]

i turn into a pumpkin at midnight anyways.......

[ozzy1100]

http://i1136.photobucket.com/albums/n493/ozzy1100/F5D65878-07B9-4D60-8896-F7CE93B0CE6C_zpsjq9xfrj0.jpg (http://s1136.photobucket.com/user/ozzy1100/media/F5D65878-07B9-4D60-8896-F7CE93B0CE6C_zpsjq9xfrj0.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/E17D21D6-E6C1-42BC-8468-A03A6852330C_zpszzjdlh5n.jpg (http://s1136.photobucket.com/user/ozzy1100/media/E17D21D6-E6C1-42BC-8468-A03A6852330C_zpszzjdlh5n.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/D9CBF626-44BD-449A-8706-AABBD6F6F17D_zps9vwrkr8z.jpg (http://s1136.photobucket.com/user/ozzy1100/media/D9CBF626-44BD-449A-8706-AABBD6F6F17D_zps9vwrkr8z.jpg.html)

[Gix11]

That is some rad work Lynton!

[ozzy1100]

That is some rad work Lynton!
Thanks si, I walk into the shed and see 10 plus z heads just laying on the floor amongst other goodies and I can't help giggle

[BANDITROD]

By the way, that was supposed to be nutter not butter. Dickhead tablet bullshit.welcome to my world

[Gix11]

Wow, now that's a random post!

[DCRacing]

You are living the dream Lynton.....

[ozzy1100]

You are living the dream Lynton.....

As in, no money, no sleep, no end in sight and never getting any closer to my own builds.......... Lol

[ozzy1100]

You are living the dream Lynton.....

As in, no money, no sleep, no end in sight and never getting any closer to my own builds.......... Lol

[ozzy1100]

Well those that remember zed sled (aka Jason ) from the early days can get a giggle at this
Jason and Scott ( the other half of the Kawasaki soup nazi co-op ) are on a trip to Japan as we speak
A few mths ago the owner of doremi collection was in austraila and visited Scott's workshop and we
were lucky enough to spend a day with him... That is where the ten zed heads are ending up and he invited
us over there... I couldn't make it but scott and Jason are having a whale of a time....
Looks like we will be selling doremi grear, I'll use more than I will sell sooooo nice

http://i1136.photobucket.com/albums/n493/ozzy1100/0EF3F969-8F89-4FE6-8885-48F13352DEF6_zpsf8dsvmln.jpg (http://s1136.photobucket.com/user/ozzy1100/media/0EF3F969-8F89-4FE6-8885-48F13352DEF6_zpsf8dsvmln.jpg.html)

http://i1136.photobucket.com/albums/n493/ozzy1100/2A569260-CC71-4A9D-8C8A-75357D86E138_zpsbl9epqy9.jpg (http://s1136.photobucket.com/user/ozzy1100/media/2A569260-CC71-4A9D-8C8A-75357D86E138_zpsbl9epqy9.jpg.html)

[evad]

I bet that will be the trip of a life time, those 2 are major Zed heads. Love to hear what Jason has to say when he gets back!