01 gixer thou clutch.

[craig]

The clutch has no slip but if you take off with the revs a bit high just riding the clutch it just bites. Smooth to take off if revs are low, but a little high and it's on or off. WTF. I did put new clutch plates in but didn't soak them? Old plates were the same.

[Redmohawk]

Lean bike over at a good angle towards clutch side and pump clutch for a while to get a little oil into the clutch basket. Leave it sit overnight try it again tomorrow. Before pulling it down.

[Deano]

Pull em out and soak them

[craig]

Thanks guys l'll try the easy way first, but I think a soak is in order. Cheers.

[latheboy]

Easy way won't work... You are meant to soak them for 24 hours before putting them in .. you may have glazed them as it is ..

[Gix11]

Don't OVER de-glaze them if you have! I made that mistake.