View Full Version : El duece......albi's 3rd go!!!
EL DEUCE will be dealt a new hand in 2013 !!
well as some of you know on our facebook site , my old build from last yr i decided from NFR and watching YELLA have way to much fun and then SEN setting a chalange that i could not refuse,well i could have just said NO ! but there is no fun in that !!
im not content in fitting just one turbo but rather "two" turbos ,why ?? why the hell not!!
so ive been doing some moonlighting whilst off after my knee op"jury is still out if a smart move or not"
im ging to use 2 x GT1249
an m3 black box as sugested by ben.
two intercoolers !
not running any cans just right out the turbo baby yeh!!
and fighter the bike aswell!!
seems old kev didnt like the RC8 tail he got for his BUSA project this one mu little princess is on and he has gone for a different route of seat!!
his misfortune is my gain !!
3268
and now the RC8 tail is mine
3269at the same time i got kev to make up a quick seat pan for basic shaping then it will get covered in some nice leather!!
my subbie will be made from the two rods you see,chrome moly tie rod bar from a speedcar,walked into pitcrew here in newy and asked if they had some 15mm-20mm chrome moly tube for sale nope !!
but after talking for a hour or so he suggested these rods he no longer sells as he uses alloy now ,they used to cost $60 each rod threaded both ends aswell got them for $30 each.
started to rip her appart.felt soooo wrong to do!!
3270
but to rip appart felt oh sooooo good.
3271cheers jules.
ok so here goes i personaly thought hmm why did kev buy this seat in and not use it as i was driving back to newy???
well who cares as when i sat it on the bike i got a hard on yeh!!
3272
rip it appart i did and got the new seat on .
3273bugger me this thing looks the goods on there !!
3274all it needs is a widdle trimming and it will fit like a undersized condom on john holmes!!
3275plenty o room for battery and ecu!!
3276does my arse look big in this ??
im loving this seat lol
3277
you digging this ??
3278
the cool thing is that the seat base is like the tank , narrow fat then narrow!
3279
a lot o room for a nice pack o card's mural with the ace's face up!!
3280
see wat i meen ^^^ look's like it was made for a TLS not a stinking KTM RC8 !!
well the sub frame is going to be easy i have spare battery retaining bar and also seat lock and barrel.
but the tail light as indicators im not so sure on ??
going to run pollished ring front indicators of ben,but need to work out something cool for rear!!
any suggestions ????
RevHead
06-01-2013, 07:46 AM
does your seat base cover the whole opening of the tail like mine.
Yella
06-01-2013, 08:48 AM
Nice Albi
Redmohawk
06-01-2013, 10:08 AM
well the sub frame is going to be easy i have spare battery retaining bar and also seat lock and barrel.
but the tail light as indicators im not so sure on ??
going to run pollished ring front indicators of ben,but need to work out something cool for rear!!
any suggestions ????
High brigtness 5mm LED run on edge of tail on the inside with holes drilled for light output.
3284
Yeh Pete it will do.
Cheers tells its half Ur fault this.
Red ,so you meen to fit led from inside tail and expose only heads of globes!!
Redmohawk
06-01-2013, 12:01 PM
yep spot on
RevHead
06-01-2013, 02:18 PM
i just made a tail tidy and hung everything off ,of that
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/548591_3939035206491_1973539553_n.jpg
Looks great Albi. Really changes the bike. :)
MattyDucati
06-01-2013, 08:32 PM
I like where ya goin with it bloke!
yep spot on
ok the only problem with that is in NSW any rear facing light needs to incoprate a reflector of same colour??
time for some web searching!!
latheboy
07-01-2013, 02:21 PM
That tail looks shit, it would look awesome on my bike tho......
It fits the frame and tank really well.
How will you mount the turbos? one on either side?
fimpBIKES
07-01-2013, 03:24 PM
dont think u need to worry able the reflector in light thing if u have some sort or red reflector on rear somewhere (some sticker on plate surround would do )
Redmohawk
07-01-2013, 04:55 PM
ok the only problem with that is in NSW any rear facing light needs to incoprate a reflector of same colour??
time for some web searching!!
In vic its only the RED that needs a reflector , I'd check the deal bloke as clear indicators are legal in NSW (no reflector on them) so you might be in with a chance.
Redmohawk
07-01-2013, 04:58 PM
dont think u need to worry able the reflector in light thing if u have some sort or red reflector on rear somewhere (some sticker on plate surround would do )
I'm using Red reflector bolts (18mm round head with red reflector looks a bit like a Dash "push to start button" ) to secure the Number plate to supply my red reflector for Vic rego inspection. Bloke doing the roady said that would be fine for a pass.
That tail looks shit, it would look awesome on my bike tho......
It fits the frame and tank really well.
How will you mount the turbos? one on either side?
oh yes they will be mounted either side!!
3292opps sorry latheboy i forgot to attach pic!!
Big Dan
07-01-2013, 05:51 PM
You can do pics without Gitzy:cool: Ill have to get you to do mine:D
You can do pics without Gitzy:cool: Ill have to get you to do mine:D
pics i can take but mine isnt as big as todds :confused:
RevHead
07-01-2013, 07:47 PM
ok see this txt ,there is a little box ,un,tick the little box and the piccis will be bigger!
"Retrieve remote file and reference locally"
latheboy
08-01-2013, 07:11 AM
3292opps sorry latheboy i forgot to attach pic!!
Are they above the oil line in the sump?
Will you run a scav pump or just gravity drain?
They look like they are levitating :D
One for each port or are you going to link them?
latheboy
08-01-2013, 07:12 AM
but mine isnt as big as todds :confused:
hehe
Cruisecontrol
08-01-2013, 02:06 PM
3271
Just a question. Was the spelling intentional?
As far as I know a "duece" is slang for shit.
Redmohawk
08-01-2013, 07:13 PM
Pritty sure he ment Deuce as in two , duece is only slang for shit due to mispelling of Deuce IE number 2's is also slang for shit.
just a question. Was the spelling intentional?
As far as i know a "duece" is slang for shit.
opps hehe yup spelt it wrong !!
ok lets see if i can post tha bigger pics hmmm here goes .
http://imageshack.us/scaled/thumb/829/bmxtitlesandbankstownsh.jpg
[IMG]http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow019.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow019.jpg.html)
wooohoooooo sorry big moement for me lol.
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow015.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow015.jpg.html)
this is taken the day before fimp took to maitland bike show.
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow014.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow014.jpg.html)
ive been asked soooo many times so is it a ducati?? WTF are you serious, "well its got a dry clutch" i just leave it at that lol.
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow013.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow013.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow018.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow018.jpg.html)
says it all !!
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow011.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow011.jpg.html)
my tramp stamp!!
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow009.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow009.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow008.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow008.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow443.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow443.jpg.html)
hmm licky lick at the bankstown bike show yeh !!
http://i1080.photobucket.com/albums/j329/abli1/bmxtitlesandbankstownshow401.jpg (http://s1080.photobucket.com/user/abli1/media/bmxtitlesandbankstownshow401.jpg.html)
whats the saying ?? SHAKE N BAKE !!
http://i1080.photobucket.com/albums/j329/abli1/IMAG1127.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1127.jpg.html)
its all in the prep ^^^^
http://i1080.photobucket.com/albums/j329/abli1/IMAG1132.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1132.jpg.html)
shake
n bake !!
just dont tell the wife hehehehehe.
http://i1080.photobucket.com/albums/j329/abli1/IMAG1686.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1686.jpg.html)
time to make zee battery box .
http://i1080.photobucket.com/albums/j329/abli1/battbox.jpg (http://s1080.photobucket.com/user/abli1/media/battbox.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1751.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1751.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1753.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1753.jpg.html)
pipes all a go .
loud pipes saves lives huh !!
http://i1080.photobucket.com/albums/j329/abli1/IMAG1430.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1430.jpg.html)
i was trying to find some ggod round pipe to use for the sub-frame ,went into pitcrew at thornton "speedcar builder" and bought these 15mm od chrome molly track rods for $25 each by memory .
http://i1080.photobucket.com/albums/j329/abli1/IMAG1430.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1430.jpg.html)
place in press to desired bend .
http://i1080.photobucket.com/albums/j329/abli1/IMAG1459.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1459.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1464.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1464.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1473.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1473.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1478.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1478.jpg.html)
i want to use the stock batt clamp and seat lock to make servicing easyer.
http://i1080.photobucket.com/albums/j329/abli1/IMAG1482.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1482.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1483.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1483.jpg.html)
opps for got to add this part " n bake"
http://i1080.photobucket.com/albums/j329/abli1/IMAG1133.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1133.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1485.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1485.jpg.html)
turning some stock down to make threaded plugs.
http://i1080.photobucket.com/albums/j329/abli1/IMAG1489.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1489.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1637.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1637.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1640.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1640.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1651.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1651.jpg.html)
for the mounting of the glass and to make servicing very easy "LANDROVER take note !! im using "moto" dzues clips.
http://i1080.photobucket.com/albums/j329/abli1/IMAG1659.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1659.jpg.html)
http://i1080.photobucket.com/albums/j329/abli1/IMAG1662.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1662.jpg.html)
well it is shedbuilt after all!!
http://i1080.photobucket.com/albums/j329/abli1/IMAG1663.jpg (http://s1080.photobucket.com/user/abli1/media/IMAG1663.jpg.html)
other section of dzues clip mount^^^^
wackyrider
27-04-2013, 12:37 AM
Looking good Al. You gonna try pop by Kev's next weekend when I'm there?
rod185651
27-04-2013, 01:43 AM
Bigger pics do the bike justice mate. Looks nice and tidy
Looking good Al. You gonna try pop by Kev's next weekend when I'm there?
Wish I was Jules but I'm taking two weeks unpaid leave to help a mate with his NRMA shifts as his farther in law is on life support in fiji, so ill be working all weekend otherwise I would have been there with bells on .
latheboy
27-04-2013, 07:43 AM
Turbo ... s where for they gone
Turbo ... s where for they gone
Still doing them , the money I saved at Xmas had to be used when work laid me off for three weeks after my knee op as they didn't want me there till I had full clearance and as I just had 5 weeks hols for knee op I had no time inked so that eat up money quickly as well as my sons ear op.
That's why I've gone back to NRMA on weekends to save the money back up, I only want to use new parts.
But in the time being the rc8 tail and swingarm will have to do me .
Cheers rod ,bigger is always better
wackyrider
27-04-2013, 09:49 AM
Wish I was Jules but I'm taking two weeks unpaid leave to help a mate with his NRMA shifts as his farther in law is on life support in fiji, so ill be working all weekend otherwise I would have been there with bells on .
You're a good man Al. Will have to be another time
Fer sure mate ,looks like that will be NFR
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.