Busa Brake Mods

[kev@vcm]

hey guys now the bike and i are off the road for this year i have finially started the front brake mods , the 6 pot callipers are adiquate to a point so i wanted more brake plain n simple , found a post on here and some pics of a busa with radial brakes but using the stock GEN I forks , it was GITZY that pointed me in the right direction and i did a contra with ROBMAC for the BKING radial callipers , when the parts arrived yesterday and it took me only a few hours to install them and they are spot on

enjoy the pics guys

2456
2455
2454

[xa-mont]

So with that you wouldn't actually get the advantage of radial brakes would you? Just the advantage of the better calipers? (Because it is still mounted axially)

[kev@vcm]

So with that you wouldn't actually get the advantage of radial brakes would you? Just the advantage of the better calipers? (Because it is still mounted axially)


the next thing on the cards is a radial master to go with the callipers , and this will give me even better brakes and for me its all about better preformance on the bike ,

[EVLZX]

Yeah I was considering this too for the ZRX in the end I went with the nissin 4 pots cos it worked out cheaper.
The major advantage of using the radial mount calipers is pad choice.

[EVLZX]

It suits the USD's Kev.
I don't think it matches the RWU.

[xa-mont]

I was more talking about the different transfer of brake forces between radials and axials

[kev@vcm]

i think when i get the bike back into shape after it had been painted i will do a full shake down on the brakes and go from there

[EVLZX]

I was more talking about the different transfer of brake forces between radials and axials
What's that......

[EVLZX]

i think when i get the bike back into shape after it had been painted i will do a full shake down on the brakes and go from there

Are you going to go Brembo or Nissin masters? Or Accossato?

[StuNVA]

Hey Kev, where did you get the adaptor ?

[kev@vcm]

Are you going to go Brembo or Nissin masters? Or Accossato?

that im not sure of as i dont know alot about masters as of yet im thinking i will just get heaps of info off the guys here ,


Hey Kev, where did you get the adaptor ?

there you go mate http://www.ebay.com.au/itm/320965661501?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[Watto]

mate K5 onwards gixxer1000/not sure which year 750's etc have radial master as standard - can pick em up on the bay for a reasonable price

[robmac]

there you go mate http://www.ebay.com.au/itm/320965661501?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Aluminium from Taiwan - brakes -Hayabusa.........one of those doesn't seem right :eek:

[kev@vcm]

Aluminium from Taiwan - brakes -Hayabusa.........one of those doesn't seem right :eek:


i know dude but im really supprised at the quality there top notch im really stoked with the brake package

[EVLZX]

He is (adaptor guy) highly recommended across a lot of forums.
There's a website that sells them as well for about twice the price http://www.yoyodyneti.com/

[RevHead]

lot of work when 4 pot callipers off of tls,gsxr1000,work heaps good i can stop my busa on a dime,and chase was good enough to sell me the callipers cheap a while ago.

[kev@vcm]

lot of work when 4 pot callipers off of tls,gsxr1000,work heaps good i can stop my busa on a dime,and chase was good enough to sell me the callipers cheap a while ago.


did you actually read my post mate it took bugger all to do mate lol and yeah just like your busa you may not like it but its a mod no one eles is willing to try and the resunts are awesome ,

[RevHead]

did you actually read my post mate it took bugger all to do mate lol and yeah just like your busa you may not like it but its a mod no one eles is willing to try and the resunts are awesome ,

is it orange,lol
of course i read it ,did u sneak off for a little test ride ,its a good mod,though

[kev@vcm]

yeah orange it is dude lol , the are wicked brakes just need a diffrent master and then its done

[RevHead]

check this big guy,http://www.ebay.com.au/itm/04-Aprilia-RSVR-RSV1000-RSV-1000-Brembo-Radial-Front-Brake-Master-Cylinder-/230832655549?pt=Motorcycles_Parts_Accessories&hash=item35beb2ccbd

[EVLZX]

I'm not 100% but the oem stuff is 16mm... I think.

[Amigos]

admins i try see this fotos and i take this message...

Amigos, you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
please heeelp .. thanks

[pav69]

pay money become a member and see all talk to si amigo he will help

[Hagarr]

HHMMM thems not B-King Calipers Kev! Nissin should be the brand Tokico are normally on Kawas aren't they.

Still better than the six pots though no doubt!



hey guys now the bike and i are off the road for this year i have finially started the front brake mods , the 6 pot callipers are adiquate to a point so i wanted more brake plain n simple , found a post on here and some pics of a busa with radial brakes but using the stock GEN I forks , it was GITZY that pointed me in the right direction and i did a contra with ROBMAC for the BKING radial callipers , when the parts arrived yesterday and it took me only a few hours to install them and they are spot on

enjoy the pics guys

2456
2455
2454

[Tony Nitrous]

HHMMM thems not B-King Calipers Kev! Nissin should be the brand

Ha! I missed that.
Yeah, as far as I know all B-Kings had Nissin's,
black or silver depending on the bikes original factory colour.