1998 zx9 Indicators not working

[ride29er]

Okay I got everything electrical besides my blinkers working, ive found the wires for them but they dont seem to work, even when I press the indicator button it wont flash up on my dash, I havent found the relay yet, im presuming its under the tank, any help or a guide of were to start would be great, im going to get a test lamp and start poking wires today to see if there is power,

[ride29er]

I found a blown fuse, replaced it and we have power, but it does not flash and only lights up when I indicate left

[ride29er]

So Im presuming the flasher is broken or not there, when i press left now the left indicator comes on but does not flash, but when I hit Right, nothing happens, not even on the dash

[ALBI]

flasher can has gone to the gods mate!!

[ALBI]

either that or a poor or broken earth

[BANDITROD]

or have you fitted led indicators

[ALBI]

they should still work rod but flash twice as fast!! i fixed that prob with one from supercheap!

[wackyrider]

Start with the basics. Are the bulbs all good?

If not, check the wiring, then the flasher can

[BANDITROD]

not always mate i have seen them stay on after fitting leds plenty of times

they should still work rod but flash twice as fast!! i fixed that prob with one from supercheap!

[ride29er]

yes they are led, I worked out the problem/problems, #1 problem is dodgy previous owner, he had used speaker wire and wired all 4 blinkers off the front wires, with no tape so in 3 spots wires were touching causing them not to work, after sorting that, the LED relay the previous owner had installed had died, so I installed the one I got with the blinkers and blinking left worked but right didnt, so I pulled apart the actual blinker assembly on the handlebars and one wire was pulled out, so problem solved I can now indicate, cheers for the help guys