View Full Version : Rearsets?? Which one fit ?
kartras
28-05-2012, 11:46 AM
Anybody know which rearsets may fit directly a '93 GSXR 750 wp? I have stock on the bike but looking for somfing a bit sweeter without adaptor plates. I have heard that Busa ones or bandits may fit but I aint too sure which models.The dimensions on my '93 750 are about 72mm between the mounting points centre to centre (at a rough measure)
Anyone know which models may be compatible? or where I might get the dimensions from other models?
Fanks
Hillsy
28-05-2012, 12:52 PM
I didn't see any for your specific model, but there's a bunch of aftermarket ones over here for around $200:
http://stores.ebay.com/Dragon-Racing-Pro-Shop/Rearsets-/_i.html?_fsub=15342730&_sid=438559745&_trksid=p4634.c0.m322
(http://stores.ebay.com/Dragon-Racing-Pro-Shop/Rearsets-/_i.html?_fsub=15342730&_sid=438559745&_trksid=p4634.c0.m322)You could probably ask a question on one of them to get the bolt spacings.
There's more generic ones on US eBay for the same sort of money, too.
kartras
28-05-2012, 01:12 PM
Cheers hillsy I'll check em out.
Yeah the problem is the watercooled gixer seems to be a B#$tard to find off the shelf after market bits. But if you can do some research and find a more popular model with which the parts are interchangable then you can order them to fit.But it is sometimes hard to find the dimensions/measurements you require to order with confidence.
kartras
29-05-2012, 06:59 PM
Anyone else got any ideas on interchangability????(is that a word)
Watto
29-05-2012, 07:48 PM
mate I know its not watercooled but when I had my oil cooled slingy frame (89 vintage), I found kwaka ZX9 rearsets were same hole spacing - think was from around a 98-02 model or thereabouts - sorry dont have them anymore to be able to confirm - have you tried looking on http://www.oldskoolsuzuki.info/
kartras
31-05-2012, 06:54 PM
Yahh watto had tried a few forums ,Oldskool included ,but no more info.......I'll have to try and get to a breakers yard with the vernier
Hillsy
01-06-2012, 08:43 AM
I just measured a stock ZX9 00 set - they're 61mm c to c so you can rule them out. Pretty sure the ZX6/9 were the same all the way through 97-03.
Also, I got a set of 929 Blade aftermarket rearsets on my ZX9 which were around 62mm (I milled the holes out to fit), so you can rule them out too.
Hillsy
01-06-2012, 08:47 AM
Just found these:
http://www.ebay.com.au/itm/CUSTOM-BIKE-REARSETS-FOOTPEGS-FOOT-REST-UNIVERSAL-MOTOR-FITS-HONDA-SUZUKI-YAMAHA-/130632350527?pt=AU_Motorcycle_Parts_Accessories&hash=item1e6a4b7b3f#ht_2591wt_985
If you're prepared to make some adapter plates, these are the cheapest ones I've seen by far.
Fight_fan
01-06-2012, 10:38 AM
I went thru this a few years ago... In the end I jst had some adaptor plates made up. Put it in the too hard basket!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.