Nemo's (no name) bike

[nemo]

http://i916.photobucket.com/albums/ad8/nemo115/DSC02592copy.jpg

[RevHead]

nice ride.

[Weaselman]

chop it!

[nemo]

I had a two bros pipe that was rashed/then chopped down but not such a fan of the fart noise and loss of power (from my 400 i know right)
Only other thing to chop is the subframe maybe, unless theres some clever bastid here can build me a bolt on ali subframe for that same seat...
Mono shock to come, once i can work out geometry, its either gunna havta be whole new swinga/shock/link/wheel (vfr/rvf400 would be nice, but a bit skinny), or braced frame and swinger and a shock off some 600.

[ALBI]

is it called no name as you are using cheap parts ???

[ozzy1100]

In my opp I'd leave tail and subframe I like the look
I'd do something sim to what I was doing with ex's 550 zephyr http://www.streetfighters.com.au/forum/showthread.php?12060-wifes-zephyr-550&highlight=Wife%27s+zephyr
Usd front end and out to 180 190 rear I was looking at one in car park today
looks like there is the room at a glance. Mono shock would look good with that tail
and IMO stay away from sssa just find right arm stock type arm and mod to fit
Eng to do swap is easy if u know right people, I line faces my own easy as and legal side is
easy as well on the swap. The front end is even more easy forks at right length buy full front
end and just machine new steem to suit I worked it out I could do $200 to 300 out of
7075 ally so any machinist would be under that for beer money

[nemo]

is it called no name as you are using cheap parts ???

hah i wish! This "cheap transport" is the damn most expensive thing i have! (bar the missus)
Just no name because every other bastid has build/project/pet names for their bikes and mines just some whore that i ride..

[nemo]

In my opp I'd leave tail and subframe I like the look
I'd do something sim to what I was doing with ex's 550 zephyr http://www.streetfighters.com.au/forum/showthread.php?12060-wifes-zephyr-550&highlight=Wife's+zephyr (http://www.streetfighters.com.au/forum/showthread.php?12060-wifes-zephyr-550&highlight=Wife%27s+zephyr)
Usd front end and out to 180 190 rear I was looking at one in car park today
looks like there is the room at a glance. Mono shock would look good with that tail
and IMO stay away from sssa just find right arm stock type arm and mod to fit
Eng to do swap is easy if u know right people, I line faces my own easy as and legal side is
easy as well on the swap. The front end is even more easy forks at right length buy full front
end and just machine new steem to suit I worked it out I could do $200 to 300 out of
7075 ally so any machinist would be under that for beer money

I like the idea of USD front, and even was looking into it before i decided i wanted to get married (fookin roite?) had some cbr6 goodies all lined up and ready..
Yeah probably wont go the SSSA i like the look of beefy block swingarm on both sides.
Its 160 rear at the moment so maybe up to 170 but only so i can find tyres easier than 160s.
From the arse end it looks pretty tough at the moment (fer a pipsqueak ova bike) so dont really want to mess too much other than monoshock (eventually)

[ALBI]

hah i wish! This "cheap transport" is the damn most expensive thing i have! (bar the missus)
Just no name because every other bastid has build/project/pet names for their bikes and mines just some whore that i ride..

lol should call it "HOOKER"

[Weaselman]

Clip ons and a GP style pipe methinks oh and wrapped headers

[kev@vcm]

and should have a custom seat as well but yeah chop it sounds good

[ozzy1100]

on that size bike a 5.5 rear rim with a 180 looks shit hot
i forgot some pics got lost on change over ill see if i can find the mock up pics for the zephyr so u can see how it looks(they the same size bike)
if u want to stay with twin shock at the moment id say front end swap and rim swap front and rear and clean up the rest

[ozzy1100]

ok not the same bike but sizeing about right and very close in stock trim
this is a zephyr 550 with gsxr usd , zrx1100 swing arm and gsxr 1100 rims (3.5 120 , 5.5 180)
wanted to keep the feel and look but to make it how the factory should have with some mussel
http://i1136.photobucket.com/albums/n493/ozzy1100/P153101_24-11-10600x450.jpg

[El_Hefty]

is that you shed ozzy? If so im fucking jealous

[sharky]

His shed has its own postcode mate....its bigger than his house

[RevHead]

ok not the same bike but sizeing about right and very close in stock trim
this is a zephyr 550 with gsxr usd , zrx1100 swing arm and gsxr 1100 rims (3.5 120 , 5.5 180)
wanted to keep the feel and look but to make it how the factory should have with some mussel
http://i1136.photobucket.com/albums/n493/ozzy1100/P153101_24-11-10600x450.jpg
nice jacks i didnt think anyone would use my idea cheers

[ozzy1100]

is that you shed ozzy? If so im fucking jealous
lol thks mate but thats a old pic u should see it now if u ever up ipswich way u should drop in
and russ anything is bigger than my house
pete yer got that idea of u when u posted it yrs ago $5 a pop from wreakers y not

[nemo]

Clip ons and a GP style pipe methinks oh and wrapped headers
Wrap coming. I had clipons when I got it. Dirty bars are much better.

[nemo]

and should have a custom seat as well but yeah chop it sounds good
Custom seat would be nice, know anywhere good?