dyno set up

[alfiestorm]

Anyone recommend anywhere here in Adelaide area for dyno work.

I need to get my bike setup for the Aussie climate

[WATEVR]

the best that i know of is neville lush racing, they are in victor harbor.

[alfiestorm]

Thanks chris I will look them up

[RussVC]

Here's somewhere a bit closer to home for you.
http://www.superbikeperformance.com.au/

[WATEVR]

never heard of them russ are they a new shop or have they been around for a while??

[RussVC]

I think they been going for about a year, one the blokes there is Jim Hanlon who was Hanlon Race Engines in Waymouth Street a few years back.

[geesexar]

heard of jim hanlon he used to race.. the memory is fucked, cant remember exactly wot class..70's early 80's...andre bosman was SA sidecar champ...fuck man he was hell on 3 wheels, really knew his stuff

[alfiestorm]

Right then thought I would set it up the old fashioned way plug chops and mechanically balanced the carbs and hey presto the front wheel is now reconnected to the throttle again[8D].

oh happy days are back again:D

[geesexar]

WHEN TECHNOLOGY FAILS...GO FOR THE SPANNER

[sickboy]

I've got my SV booked in for a custom map on tuesday ,I'll let youse know how I get on.

[alfiestorm]

quote:Originally posted by sickboy

I've got my SV booked in for a custom map on tuesday ,I'll let youse know how I get on.


I will be interested to see the results. what set up has your sv got sickboy

[sickboy]

Yoshi cans ,k&n filter,tre,PAIR thingy removed, Power commander 3usb with a map downloaded off the Power commander website.The bikes running fine ,I guess the dyno will show up any weaknesses.

[sickboy]

With the mods I've done to my bike the base run showed a max power figure of 105.74 hp and max torque of 65.70 ft-lbs,after a remap I ended up with a massive wait for it 107.68hp and torque was up to 67.03ft-lbs.I've only been on a short ride but it does feel a bit smoother through the rev range .And I believe a stock standard SV makes around 103 hp.

[cutcat]

Go and visit Neville Lush just to talk about the Kwaka triple days. He may even still have some nice bits under the counter.

[latheboy]

quote:Originally posted by sickboy

With the mods I've done to my bike the base run showed a max power figure of 105.74 hp and max torque of 65.70 ft-lbs,after a remap I ended up with a massive wait for it 107.68hp and torque was up to 67.03ft-lbs.I've only been on a short ride but it does feel a bit smoother through the rev range .And I believe a stock standard SV makes around 103 hp.

Its not uncommon for people to lose power when they mod their bikes so just because you gained only 2hp dont be [V].. Have you got a print out of the dyno run's?

[sickboy]

I think I was being over optimistic and expecting a higher figure ,you know seat of the pants type thing.I'll try and post a pic of the print out Latheboy.

[sickboy]

http://www.streetfighters.com.au/forum/upload/64497965293463.jpg

[latheboy]

When you get a dyno run guys asked them to display the AFR(Air Fuel Ratio), It's nice to see the HP and Torque but the AFR is more important ...
That looks like a good there sickboy nice power curve

[sickboy]

No worries mate I'm headin back to Adelaide on thursday so I might drop in on them again maybe see if they will give me chart with the revs on instead of kph and the afr.