Sticky flush mounts....

[RUSS M8]

I have some plain looking flush mount indicators on the front of the Bandit, they fit in well with the bike, but I can't keep em stuck on!
Next step is stickoflex me thinks! ? [:0]
Me thinks the problem starts coz the holes in the fairing are quite big....Not alot of surface area for the blinkers to stick too...
http://www.streetfighters.com.au/forum/upload/8458958035225.JPG

[Iceman]

I put flush mounts on my RF. I have a large aluminium stepped washed to fill the hole left by the standard indicator stalk.
http://www.streetfighters.com.au/forum/upload/84589651183316.jpg

[Jockney Rebel]

sorry to butt in gents but ive just put led indicators on the triumph and i cant get them to flash right
the usual variable flasher unit just glows and the stock one flashes like fuk

[Gix11]

It's all to do with the load Jim. I'm shit with electrics, that's what I found when I did mine. Resistors on the hyper flashing unit is the future. Try these:

http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=1027

http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=6115

Some of the smarter, electrical geezers will have the answer mate.

[Slain]

i had the same problem with my blade sticking them on, i used blue rtv silicone and silconed a long bolt onto the back of the flushmounts (very generous with silicone) and then used the stock holes in the fairings and threw a nut with a split washer on the inside

[Gix11]

Bin the fairing - job sorted.