View Full Version : Needed GSXR carb parts
Weaselman
06-10-2008, 04:43 PM
Has anyone got a fucked out rat shit knackered set of carbs for an 86 slabby?
I dont need anything more than one of the carb slide actuator arms (The one with the bolt in it not screws)
mines busted and im desperate
sharky
06-10-2008, 06:23 PM
Try Ozcat ;)
Weaselman
07-10-2008, 09:44 AM
Where are you ozkat!
I've got the original 34mm? Cv's virtually complete [except for one needle and the diaphrams, that some idiot glued bits of rubber onto the cracks.......go figure!]
What do you mean by carb actuator arm, with bolt?? Got a picture or........more detail!!
You can have them for the postage cost, probably 25ozzies or so from Darwin to Sydney, at a guess.
Weaselman
07-10-2008, 02:22 PM
its the arm that connects to the top of the carb slide and lifts it up and down
three are the same but the inside one next to where the throttle cable goes is a solid cast item
and its the odd one out that broke
do you have a pic please mate?
My cams on the nut atm
Thanks heaps
http://www.streetfighters.com.au/forum/upload/32344476864310.jpg
We may be talkin different carbs! These are what I have, and they are CV's, no mechanical connection to the sliders.........so I probably can't help ya......[V]
Weaselman
07-10-2008, 03:51 PM
nope thats not them but thanks for your help mate
Weaselman
07-10-2008, 03:54 PM
http://www.streetfighters.com.au/forum/upload/323444861370764.jpg
those are off an 85 for refrence
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.