slabbie fork caps needed.

[Zed14]

if you have a set of slabbie fork caps laying around your not gonna use can i have em please.pm me with details .:)

[03gixxerpilot]

rexie what exactly are you after the black caps on the top, if so pm me your details and i will post you a set

[Zed14]

im after the caps with the preload adjustment in the top and the shim that goes on top of the spring.

[03gixxerpilot]

can you put a pic or diagram so that i can see exactly what you are after, i will almmost certianly be able to help you out

[Chris41]

This bit the preload adjuster
http://www.streetfighters.com.au/forum/upload/9854895966749.JPG

[03gixxerpilot]

ok i will have a look tomorrow at the workshop

[Zed14]

thanks.

[03gixxerpilot]

sorry i have been bussy as hell and crook as well, going over the w/shop today will let you know tonight

[boris]

what do you call a slabbie I have all the top sections out of my 90 model gsxr1100 non inverted forks bud mine snapped half way down on the right hand fork but bent the left hand one to about a 50 degree angle but the top section of both you are welcome to bud if gixxers what you are talking about

[03gixxerpilot]

Zed pm me your address and i will send them down to you if you still need them, i have the whole assembly ie the rubber, the adjuster, and the plate that goes under the adjuster.
out of an '86 gsxr750

[Zed14]

thanks boris but slabbie is gsxr 1100 up to 88 and 750 up to 87. pm sent clive.

[03gixxerpilot]

No probs mate, I will put it in the post tomorrow for you, Just buy me a beer at the next AFR

[Zed14]

got them on fri thanks clive. the drink will flow at the afr.

[03gixxerpilot]

kool i hope that they are what you needed, if you need any more of the parts for the forks let me know