Worlds cheapest frame sliders??

[suxukifreak]

$8.38US (plus postage) and delivered in 10 days....

http://cgi.ebay.com/ebaymotors/FRAME-SLIDER-FOR-CBR-600-900-919-954-F3-F4-F4i-VTR-1000_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el126 2QQcategoryZ35585QQihZ023QQitemZ360071135792

http://www.streetfighters.com.au/forum/upload/547948948215961.JPG

[skb954]

Unreal price. Whats the bolt quality like? It'd be a mongrel if they snapped during a fall.

[suxukifreak]

quote:Originally posted by skb954

Unreal price. Whats the bolt quality like? It'd be a mongrel if they snapped during a fall.


Just buy whatever quality you want. :)

[gunnie]

it says postage is $30 US - is that right?

[fimpBIKES]

he needs to use a sharp, large radius tool to do that large diameter

do you lucky honda pricks get regular pitch bolts? the fine pitch gr12.8 bolts were the most exxy part of the ones i was making :(

[Weaselman]

im sticking with me oggy knobs... i know they will withstand a 1300 with a full tank of fuel sliding on them and not bend the bolt

[siwanut]

did that dent the frame a lil tho on the 1300?

[fimpBIKES]

oggys normally go straight into the engine from what i have seen

the no-cuts are the shite ones that stuff frames


oh, and oggys bend if u slam down hard
the ones i was making (fimpKNOBS tm) had gr12.9 bolts and they bend on a few peoples bikes

[xb9r]

you only get what you pay for lads

[Weaselman]

quote:Originally posted by fimpBIKES

oggys normally go straight into the engine from what i have seen

the no-cuts are the shite ones that stuff frames


oh, and oggys bend if u slam down hard
the ones i was making (fimpKNOBS tm) had gr12.9 bolts and they bend on a few peoples bikes


I dropped my XJR1300 on one of them pretty hard and shot it down the road.
Held up fine

[333]

i've got rg-racing ones from england. no bending, no frame damage, no digging in. it just wore down the black stuff. good gear i reckon.

[boris]

what do you make yours out of fimp if you don't mind me asking I have to make some for my 95 gixxer 1100 cos I've never seen any for oldschool gixxers I was gonna use nylon like I use for my body lifts on fourbys

[fimpBIKES]

use something harder

i used acetal (brand name is "delrin" but just buy the acetal)
its harder, so will slide better and not grip

plus its meant for machining ;)

[boris]

thnx bloke will ring the plastics factory tomorrow and see if they stock it sometimes it sux having an older bike but I like playing on the lathe so will surely make something