PDA

View Full Version : worth it or not....



BillyWhizz888
29-08-2007, 05:11 PM
81 model 1100 Katana. Was a runner but previous owner began pulling motor out because it had a knock. Only got as far as pulling fairing and carbs off before losing interest so it's 99 % complete barring carby clamps and odd fairing/tank bolts.
1170 Wiseco big bore kit in motor.
Big 4/1 pipes either Yoshi or Tingate with Tingate alaumininum can. Couple of small dents underneath but overall good nick.
Fireblade forks and brakes ( Nissin calipers ).
Instruments all worked, has replacement needles. Showing 48 000 kms.
Tank has a couple of very small dings where the clip ons touch otherwise good nick.
Fairing and side covers all there and in good nick, choke knob missing.
Frame powder coated black.
Polished swing arm.
Spoked wheels with stainless steel spokes, no rust.
Seat good.
Has had wiring disconnected off regulator but loom all there and good. No battery.
Unlicensed.
Got pics as bike sits in the shed if someone could post them up would be appreciated.
Bike is all together not a basket case.

$1750 ONO.

Hillsy
29-08-2007, 05:32 PM
R U buying or selling Billy??

suxukifreak
29-08-2007, 05:43 PM
Depending on the size of the rims, there worth the price alone.

BillyWhizz888
29-08-2007, 06:15 PM
I have seen an add.............
considering

18" I think

Hagarr
29-08-2007, 08:08 PM
MEL Is it in WA? There were a couple of NZ (Wire Wheel model) Kat's around in the 80's some just had wire wheel's a couple had oval bore carbs and bigger cam's they used to reckon 120+ HP back then which was pretty tidy, if so definitely worth the dollars. Front Rim was 19", 18" rear.

Blackkat
29-08-2007, 09:07 PM
yep it's worth it cost that for the frt end and wheels.

EFE 1230
29-08-2007, 09:26 PM
$1750? Nah mate tell him he's dreaming,in fact give me his number so I can tell him for you! I haven't seen a kat for that sort of money in a long time going or not. Remember, he who snoozes loses!

BillyWhizz888
30-08-2007, 11:39 PM
quote:Originally posted by Hagarr

MEL Is it in WA? There were a couple of NZ (Wire Wheel model) Kat's around in the 80's some just had wire wheel's a couple had oval bore carbs and bigger cam's they used to reckon 120+ HP back then which was pretty tidy, if so definitely worth the dollars. Front Rim was 19", 18" rear.


Yeah, though not local to Perth so thats why I am dubious
long way to go to see something that dont make noises...
might just make a sily offer and see what gives :D

fimpBIKES
03-09-2007, 09:18 AM
mmm, spokeys