PDA

View Full Version : new norton no really....



Jockney Rebel
12-12-2007, 11:25 PM
the new norton commando si was talking about heres the specs




FRAME

Frame material: 4130 chromoly steel
Swing arm: Formed Aluminum
Oil capacity: oil-in-frame backbone tank holds 3.5 qts of oil
Wheelbase: 56.5"
Rake: 24.5 degrees
Trail: 4 "
Front suspension: 43mm Ohlins RSU - Adjustable preload, compression, and rebound damping.
Rear suspension: Ohlins reservoir-style twin shocks - Adjstable ride height, preload, compression, and rebound damping.
Front wheel: 3.50 X 17" BST Carbon Fiber
Rear wheel: 5.50 X 17" BST Carbon Fiber
Front tire: 120/70 X 17" Michelin Pilot Power
Rear tire: 180/55 X 17" Michelin Pilot Power
Front wheel travel: 5.5"
Rear wheel travel: 4.0"
BRAKES & HYDRAULICS

Front rotors: Brembo 320mm semi-floating hi carbon stainless steel
Rear rotors: Brembo 220mm rear rotor
Front calipers: Brembo 4 piston "Gold Line"
Rear calipers: Brembo 2 piston "Gold Line"
POWER ASSEMBLY

Engine type: Parallel twin with push-rod valve actuation, dry sump
Displacement: 961 cc
Cooling system: Air
Valve Actuation: Push rod, hydraulic lifter, two valves per cylinder
Bore x stroke: 88 mm X 79 mm
Compression ratio: 10.1:1
Horsepower: 80 rear wheel @ 6500RPM
Torque: 65 foot pounds @ 5200RPM
Exhaust:1 3/4" header system with merged collector and twin mufflers with catalytic converters.
Ignition: Crank fired electronic
Carburetors: Twin 39mm Keihin FCR
TRANSMISSION

Gearbox: 5 speed
Final drive: 520 "O" ring chain
Clutch: Cush drive clutch
Primary drive: Direct gear drive
ELECTRONICS & CONTROLS

Charging system: 300 watt hi-output charging system
Instrumentation: Norton electronic analog speedo and tachometer w/dual trip meters
MISCELLANEOUS

Fuel tank capacity: 4.5 gallons
Dry weight: 415lbs
Seat height: 32"
Oil capacity in frame: 3.5 quarts
Gear case oil: 1.5 quarts
Warranty: 2 year unlimited mileage
Available colors: Black
Specifications are subject to change without notice.




Commando 961 SS Specs
Spec Sheet | Engine | Chassis | Gauges & Controls

Simple and direct engineering solutions are employed to create a motor that is visually and mechanically elegant; efficiently assembled in production, and easily maintained or upgraded in the owner's garage.

< back to Bikes & More

Jockney Rebel
12-12-2007, 11:27 PM
http://www.streetfighters.com.au/forum/upload/104617543129003.jpg
A new era has begun for Norton Motorcycles. The 961/SS Commando is the first new Norton model to be launched from the all new Commando Platform. This platform is the basis for multiple models in the coming years, including the Commando, Commando ‘S', Dominator, and Atlas. Each new model will draw inspiration from the past and build on the Norton legacy for the future.

Future development will also lead to the introduction of the all new, state-of-the-art, Manx Platform. These completely modern motorcycles, including Manx and Interstate, will represent the ultimate expression of the Norton brand.

Norton Motorcycles

(503) 650-5390
info@nortonmotorcycles.com

Jockney Rebel
12-12-2007, 11:29 PM
...just a shame its made stateside

Scrapyard
14-12-2007, 02:52 PM
Is it actually in production yet? Last I heard they were still looking for financial backing to build up to production. That was about 2 years ago if I remember.

Beautiful bike though. Saw it at a couple shows. Quality looks tops.

Jockney Rebel
14-12-2007, 06:43 PM
it does scrap mate i think their looking for dealerships theyve just won a court battle and now own the rights worldwide to use the name

Scrapyard
17-12-2007, 12:51 PM
excellent. look foward to it