Yamaha rear brake master cyl.

[sharky]

Looking for one of these type.
Needs to match my existing as I am going to fit 2 together to operate the front brakes.

http://www.streetfighters.com.au/forum/upload/7028560004674.jpg

[chopaweeza]

You need to measure the mounting bolt centers , measure the offset(if there is one)and make a note of any markings on it. All 4 Jap manufacturers & Triumph use a limited number of rear master cylinders and the one you are after is probably used on several dozen models from those manufacturers . So post up the details and blokes like me can have a look through their parts bins for a match.

[Seifer]

I have one from an 02 R1 if ur keen. I'll let you know tonight if it is the same.

[sharky]

This is the one on me boik. The holes are in line and about49.5mm centres...give or take half mm.

http://www.streetfighters.com.au/forum/upload/91192483035123.jpg


The bore is only 1/2" ...going by the 1/2 on the other side.
Can you get these in 5/8" ?
Mate in the UK reckons this would be the go.
Gonna hook up my front calipers and try it.