WTB a set of GS or GSX calipers

[chopaweeza]

In good working condition. To suit a GS1000 front end.

[03gixxerpilot]

hey chopper do you have a photo or what you are after?

[chopaweeza]

Not really fussed about what they are just need a working set that will bolt up to the XR600 Bobber I'm building for Bages. Here's the front end I got from the wreckers . The calipers are shot. Was going to use a ZXR 4 piston caliper but it won't clear the spokes. A set of twin piston sliders might also do the trick .

http://i10.photobucket.com/albums/a130/chopaweeza/Parts%20for%20sale/GS1000Forks.jpg

[chopaweeza]

Here's a better piccy mate. What I need is for this front end on this bike.

http://i10.photobucket.com/albums/a130/chopaweeza/Roller009.jpg

[TurboKat]

I've got a couple of sets here Wayne, a set with about 60K KM on 'em, were working fine when I took 'em off the bike but been in the garage for about 5 or 6 years - they might need a tickle up but you're welcome to them gratis or a real clean set off a 22K KM Kat, I pulled the whole front end off it a few months ago & I haven't split the brake system so they're still hooked up & full of fluid - you can have them for $50 the pair including good pads.
Let me know if you're keen.

[chopaweeza]

Sounds good mate. Shoot me a photo and the measurement between the mount centers. Pretty sure they will fit but have to be sure.

[TurboKat]

Done.

[chopaweeza]

Sorted. These will look good on the bike are are the right period for the build.