FS..GSXR oil cooled performance bits

[unsane]

Hey guys,

As i have 2 kawasaki project on the go, my gixxer projects wont be happening this year, so im gonna sell off some stuff ive had sitting around for a year and a half.

APE Bronze Valve Guides 750/1100 $100 (brand new unopened)

APE Valve Stem Seals 750/1100 $50 (brand new unopened)

Ferrara Exhaust Valves x8 '88 750/1127 $175 (brand new unopened)

NRC Left Side Cover (starter clutch) 1127 $150 (painted black but never used)

BMC Dual Pod Airfilters, Red, For 36mm Mikunis, can check if they fit 38mm but im sure they do, $150 (very little road use, about 2 pleats on bottom are a bit crushed, makes no diff too running)

Full Members can take %10 of the prices.

[ozkat]

1st dibs on the NRC cover, if i can get a pic.

[unsane]

No worries oz, will go get it out of storage and have a pic in about an hour and a half (will throw in an aftermarket gasket for it too)

[ozkat]

Cheers mate.

[sharky]

If I can't use my xjr K&N 's on the 38's I'll take the filters mate.....Need about a week or so before I get the carby's.

[unsane]

Some pics of the NRC:
http://www.streetfighters.com.au/forum/upload/713579533161142.jpg


http://www.streetfighters.com.au/forum/upload/713579533154167.jpg


found the gasket too but it has a clean tear thru one bit, but no reason why it wouldnt be oil-fast and in other wise perfect nick.

The paint is baked on VHT gloss black (not mirror finsh or anything because of the pourous surface of NRC), if you dont like it half an hour wiht some paint stripper would fix it (did it because i read on OSS that the nrc can get a bit furry with cold mornings or wet weather).

And Sharky no probs, will hold it for you until you know. The BMC stuff is sweet, better than K&N i reckon. The filters took a full 7 months to arrive from yoshimura, and are one of my favourite bits.

[sharky]

Thanks mate. As soon as I get me carbies I'll let ya know...

[Hagarr]

Giday
Seriously interested in the valve gear. Can you confirm if they are for the 1127? I don't believe the 1127 was built pre 90's. Must suit twin lobes per cylinder cams otherwise length is incorrect.
Thanx

GSX1100FJ had the 1127 from 88' onwards.

[Hagarr]

Well there you go I didn't know that. Could you confirm the valves are to suit twin lobe cams and not rocker type? Any pics?

quote:Originally posted by Hagarr

Well there you go I didn't know that. Could you confirm the valves are to suit twin lobe cams and not rocker type? Any pics?


Apparently I'm the GSX equivalent of an anorak wearing train spotter. Got any frame/engine numbers for my collection ? :D

And I ain't got any pictures except of myself nekkid, and Gix won't let me post those [xx(]

[unsane]

Hey Hagarr,

Some info:
Valve guides
VG750GSX
Suzuki GSXR750 / GSXR1100 thru '92
Bandit 1200 thru '02

Valve Seals
99204
GSX600F, GSXR750 / GSXR1100 oil cooled all models

Valves
F0023 (ape 980023)
25mm Exhaust
The stickers on the packs say F0023 "Suz.GSXR-750.1990 25mm Exhaust", except one that says "Suz.gsxr750/1100. 25mm EXH" (still the same f23 valve though.)

Was just looking around and it gets confusing, APE has them listed as 86-90 750 items and Ferrara list them as just for 86,87,90 models.
Check http://www.ferrea.com/motorcycle06.html for specs.
But im thinking these valves are for models with rockers.

[Hagarr]

No worries. Do you have bank details and is $292.50 the correct amount if not please advise. I prefer direct debit into your account if poss.
Could you E-mail me all the details to ganxta@bigpond.com and I will reply with my delivery details.

Thanx
Danny

36 and 38's are the same size intake flange. (theres "that word" again)

[Hagarr]

Giday Unsane I'll try again
I apparantely e-mailed the wrong guy so here goes
No worries. I have both engines i'm building at the moment anyway. Do you have bank details and is $292.50 the correct amount if not please advise. I prefer direct debit into your account if poss.
Could you E-mail me all the details to ganxta@bigpond.com or dannyc@watercon.net.au and I will reply with my delivery details.

Thanx
Danny

Shoulda kept me mouth shut, could do with a bit of extra cash at the moment :D

[sharky]

I'll be playing wiv me carbies this w/e (missus off to Alice Springs and that big lump of rock with her sis and hubby).
I'll let ya know after the w/e if I need the filters mate. I might be able to use mine....bit of rubber stretching required [:0]

[sharky]

I'll be able to use my filters mate, I'll make an adapter plate so they fit ( can't justify the 150 right now...saving for fools run.
Cheers for holding them for me. Let me know if the price comes down ..;).