hunting bits for new project

[Supercharger_Mark]

http://www.streetfighters.com.au/forum/upload/506011349265831.jpg

Anybody out thair got these bits?
Its for my new project, there off a slab side GSXR 1100 85/86 mod.
left hand footpeg bracket, foot break leaver, & steering damper anker.

cheers
Mark.

[chopaweeza]

Yep. I do. I have sets off 86' , 88' & 04' GSXR750 in the workshop somewhere. Know were I can get the 88' parts straight away. Others may take awhile.

Wayne

[Supercharger_Mark]

Thanks Wayne
How much do you want for them?

[chopaweeza]

I'll make sure the 86' are in good shape first. What diameter fork is the damper bracket ?

[Supercharger_Mark]

41 mm Fork Diameter

Cheers

[JackTar]

They look familiar Mark. How is it all going mate? Did you get those bits I sent you?

[Supercharger_Mark]

Yep, arrived today jacktar,cheers for that.
I sent the forms and plans of the mods in to QLD Transport yesterday so ,soon as i get the OK,
off with the sub frame.

Wayne, how did you go with the 86,87 bits? any luck?

[Jockney Rebel]

if u get stuck for the brake pedal i got a slightly ground one here off a gsx 600 looks the same its useable

[chopaweeza]

OK. I can't fond the 86' peg mount yet, I have the brake peddle, and the only damper clamp I can locate is a 43mm.

[Supercharger_Mark]

Thanks Frankenbiker, but sounds like Wayne has one, so i just have to wait see about the foot peg mount
cheers
mark.

Mark,please tell us more about these forms and plans for QLD traNSPORT.Do they still need engineering inspection before a mod plate is issued?

[Supercharger_Mark]

Hi davo
early days for me yet,i'm still going through the process, but as far as i can tell,
forms first (form No F1854 from Qld Transport)+ drafted plans for mods/alterations involving structural changes ETC.ETC.
engineers next (to OK alloy lugs welded to alloy frame and steel subframe structure).
I entend to post the hole prosess up if all goes well when i finish.
you can get the mod booklet with the info and forms you need from this web address.

http://www.transport.qld.gov.au/Home/Safety/Road/Standards/Light_vehicle_modifications/

good luck
mark.

thanks mate