Iceman - have I got a deal for you !

[TurboKat]

Ok Clint, you need these to make your life easier & your bike more powerful & economical (plus, you can tell people you've got a turbocharged AND fuel injected GS 500) I bought these off the 'Bay recently thinking they were 1100 jobs but they're 750s - too small for my application.
I've seperated the & rejoined the end (TPS)& middle (throttle wheel mechanism) ones so the're now a perfect setup for a twin, all you need is a 100mm length of 10mm angle with 4 holes drilled in it to fasten them together (or you could leave them floating) & a standard Kwaka DFI TPS from a wrecker.
Because I'm such a FUCKING TOP BLOKE, I'll let you have 'em for what I paid ($1700) + 2 schooners of Old at the Fools*.
I'll even throw in the other 2 so you'll have spare injectors, etc.
They're 30mm in, 35mm out, perfect for blow thru & they're the oldskool single butterfly type so you don't have to worry about removing the secondary butterfly & plugging up the holes, etc.
Jeez, I'm good to you Ice ;)
*In the event of non attendance at Fools Run, the 2 schooners shall be replaced with a deemed value of $50 per schooner payable in cash - TurboKat's legal council.

[TurboKat]

Pics might help. [:o)]
http://www.streetfighters.com.au/forum/upload/76861995678430.JPG

[TurboKat]

http://www.streetfighters.com.au/forum/upload/76861995676382.JPG

[TurboKat]

Better be quick before I change my mind & keep 'em for a future project. ;)

http://www.streetfighters.com.au/forum/upload/76861995678819.JPG

[TurboKat]

This is what they look like setup for a 4 cyl.

http://www.streetfighters.com.au/forum/upload/76861997583844.JPG

[Iceman]

Sold*.

*Pending legal advice on the schooner delivery and any sudden price increases.

[evad]

Good on you clint, let the madness begin,lol
:D[8D]:D[:0]:D
I have heard of guys adapting car TPS's to bike TB's. I think that one of the guys on the gPZ900r.org forum used one from a hyundai.

[Iceman]

Seeing as I know less about fuel injection than what I do about turbos, and it's only 52 days til the fools run, this is gunna be interesting.

[evad]

Oh yes, forgot to mention the kawa injectors on the 1100 are low impedance so you will need to run resistors, are you going to build a Megasquirt? It is by far the cheapest ecu even though you have to assemble it yourself.

[Iceman]

I had a look at some of the info you and Chalky put up the other day, and it would seems that Megasquirt would be the go.

[evad]

Best bet is to read through the Megamanual at this link - http://www.megamanual.com/v22manual/mtabcon.htm
Not to sure about the time frame but nothing is impossible, if i could do it anyone can :)
I will email you the part numbers of the sensors that I used on the zed, (they are ntc termistors and read more accuratly than teh std buell ones on my mate XB12, lol) they are really small and not expensive. I got them from Farnell in one. You will also need a fuel pump, is turbocat going to hook you up with the fuel pressure regulator :D from the original tbs? 2 or 3 relays and some fuses and thats it.

[Booster]

Clints shopping list.
Efi fuel pump,& small holden efi filter
boost referenced regulator
ecu, s/h wolf 2d,microtech digi or mt4(these only go to 8k rpms and would need to double the input signal ), haltech f3 f5 f7 or f9.
i can help with starter maps for the haltech and microtech.
Megasquirt have a good rep but not everyone can build them, are they available done or s/h?
Efi fuel lines,clamps tee's .
still not cheap from this point but can still be easier than carbs if there is a difficulty tuning

[evad]

You can buy them assembled but thats no fun,lol
MS1 version 3 board
http://www.diyautotune.com/catalog/megasquirti-programmable-system-pcb30-assembled-unit-p-56.html?osCsid=f2db8378b262e2917e3955b9be137f93
MS1 ver2.2 board
http://www.diyautotune.com/catalog/megasquirti-programmable-system-pcb22-assembled-unit-p-34.html?osCsid=f2db8378b262e2917e3955b9be137f93

I got mine from these guys within a week, prices are in US$

[Docktor]

I have a vl turbo fuel pump here...... Sorry Iceman , I didnt know u were lookin for turbo bits for ya GS mate. I will have a sus thru the shed and see whats layin round, You would be surprised..... Kicks a 6/71 blower out the way.

Doc

[Booster]

Pity the microsquirt isn't released , nice package for $400us

[Iceman]

I've got a peirberg fuel pump already, hopefully it'll do the trick.

[Jockney Rebel]

quote:Originally posted by Iceman

I've got a peirberg fuel pump already, hopefully it'll do the trick.


nutter ....worlds fastest <s>indian</s>iceman

Be careful Clint,remember his Ebay user name is kiss,hug,hug,hug,hug kiss.
andfkn jesus Tkat,$700.And to think i just sold 38 in 42 outs for 191$.Maybe you should change your User name to Turbofizz or Zkat,r even just Zedfizz.

[Iceman]

It's ok Davo, I'm gett'n em on tic and do'n a runner.

[TurboKat]

Ice's getting a bargain @ $1700 Davo. ;)
*sucks air thru teeth* Mate, these are extremely rare & desirable items you know, I'm really doing him a huge favour giving them to him that cheap, I could probly get 3 times that on the open market.
I coulda been a car salesman :D
Now.... how did it go..? FUCK OFF WANKER :D:D:D[:0] XOOOOX
I crack myself up. [:o)]

[EXBEN]

Hey Iceman, One of my customers is using my old MT4 fuel only computer to run his Turbo ZX9R,he's making over 200hp with it & it run's very nice for a budget unit.
Here's one that could be worth a bid.
http://cgi.ebay.com.au/Microtec-MT4-engine-management-computer_W0QQitemZ160081868414QQihZ006QQcategoryZ4 3807QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Booster]

Ben was yours 12krpm enabled or were you running it a 1/2 speed to deal with the 8k rpm limit on the mapping

[EXBEN]

No still only has settings to 8000, after that it uses manifold pressure to control the fuel. Not ideal but I guess you won't really be cruising at above that anyway.

[Booster]

ok , i can see that working fine