generating interest in parts this one is void

[alfiestorm]

I have a load of useful stuff to off load but it will have to wait until i am in auss which will be about April time as the postage costs from rip off Britain wont make it a bargain unless you know different of course.

Just so you chaps and chapets know posting any of this stuff will cost an arm and a leg.
It will be best to let me know if you want first dibs on anything and i will put your name along side the part(s) so i can contact you when i arrive in Aus around April time.
The parts are all going in with my household effects and is costing no extra to bring over so i may as well do it and have a small flurry of cheap parts for people.
I have been asked how much do i want. As i do not know what the prices are in the wreckers over in aus (apart from what i have heard on hear is they can be expensive)it's a bit difficult for me to say. What i will say is all i am looking for is to make back what it has cost me (I have been getting the stuff cheap off of ebay uk) and if i make a bit on top it will go to my fighter project
I will be updating the list from time to time as i acquire more spares

Alf

Ok ok here are some prices in aus dollars based on what i paid for them postage is extra.

Suzuki gsxr750 srad rear shock absorber good condition no leaks just a few stone chips on the spring fits srad 600 as well.

setrab oil cooler does have a small leak but will be repaired before being sold
http://www.streetfighters.com.au/forum/upload/28286491527546.jpg


Micron pipe brand new never used for GSXR1100WP with bung to blank one side of the original down pipes STREET LEGAL NOT RACE PIPE but as we know the nice people at micron make these units to come apart easily. Boxed with all parts as supplied from micron. (Docktor)

http://www.streetfighters.com.au/forum/upload/93876145318174.jpg


headlights twin rectangle with twin 55 watt halogen bulbs 2 units available
http://www.streetfighters.com.au/forum/upload/32182829720634.jpg

TL1000S usd forks they will need the stanchions re-chroming open to offers
http://www.streetfighters.com.au/forum/upload/100670753412794.JPG

http://www.streetfighters.com.au/forum/upload/100670753413342.JPG



http://www.streetfighters.com.au/forum/upload/52952815612956.jpg
Brand new Micron race silencers 3 bolt fitment approx 84mm apart for GSXR1100 WS/T models complete with mounting straps but as we all know they can be made to fit any bike in the world of streetfighters (jakam04)

I now have a complete backend for a Kawasaki zxr 750 H1 consisting of a metmachex deep under braced swing arm, wheel basically the fuckin lot. The tyre is totally fucked and will be removed if I get time or you could finish it off with a burn out.
All you will need to make this work is a brake pipe or of course it could be made to fit a multitude of projects. the wheel is a 5.5inch rim standard kwack stuff. sensible offers and it is reserved for you photo below. I have now degreased it and will be repolishing it if no one wants it in it's present untidy but good solid condition. [u]Will part this out</u>
http://www.streetfighters.com.au/forum/upload/87146202425268.jpg


Ignitions coils off of slingshot 1100 x 3 pairs per pair (peshh69 1 pair)

New never used as can be seen from the photo Dyna Hi- Performance Grey Silicone Suppression type 8mm Motorcycle ignition leads - Set of 4 - In original packaging - Dyna Part No DW-800 also comes with the aluminium barrels to go on top of spark plugs where needed photo below
http://www.streetfighters.com.au/forum/upload/8714620243454.jpg

Nissin four pot calipers gsxr's/Bandits etc 90mm mounting centers x 6 pairs. one of the pairs has braided lines and master cylinder (750) still connected per pair all in good working condition and cleaned ready to fit straight on to your bike (spot1000kat pair with braided lines etc))

GOODRIDGE FRONT BRAKE HOSES FOR A GSXR 1100/750 will fit other makes and models make an offer
http://www.streetfighters.com.au/forum/upload/10067061898814.JPG



Standard oil cooler gsxr1100k slingshot with standard oil lines (arbee) ?



swing arm gsxr1100m

gsxr front brake master cylinder from 1100k with lever

gsxr clutch master cylinder with lever and hose from 1100k (arbee)

<s>red renthall handle bars with bolt on brace 22mm diameter </s>SOLD

pingel twin outlet petrol tap with adaptor plate for slingshot gixxers x 2 offers (Docktor x1)
http://www.streetfighters.com.au/forum/upload/11291806816021.JPG


Standard airbox with rubbers and pins but no air filter from a gsxr1100L slingshot

Standard headlamps for the GSXR1100 K and L offers

Front brake lever for GSXR1100L fits most other gixxers (arbee)

Standard rear lights Suzuki,Kawasaki,Honda, Yamaha photo below
http://www.streetfighters.com.au/forum/upload/34385247333146.jpg

Alternator from gsxr1100 slingshot

<s>Cylinder head with cams and barrels and pistons bandit 600 offers</s> sold

Theres loads more







<s></s><s></s><s></s>

So you've been out flogging you're back end huh mate?

You old tart you

:D

[alfiestorm]

fuck i've been rumbled :D

[Spot1000Kat]

Hey Alfiestorm,

Email sent,

cheers,

Spot






[/quote]

Alf' i run Bosch Super Sport Inductive Core 308's on my Dyna coils,not sure if they are raw but is there any noticable advantage with the suppression leads?

[alfiestorm]

Be honest with ya nothing noticable on the road with dyna leads maybe on the dyno, They are more flexible and less prone to core breakage so are more reliable than most others

[jakam04]

Hey Alfie,

What ya want for those micron pipes?

Jarrod

[Docktor]

x2 on the pipes.
Wickid units,

Doc

[jakam04]

quote:Originally posted by alfiestorm


quote:Originally posted by Docktor

x2 on the pipes.
Wickid units,

Doc


$290 for the micron pipes but jarrod is first if he does not have them for whatever reason they will be put back up for grabs


Definitely taking them Alfie.. how are the preperations going for the move? I hate moving every three years interstate, so I dread the thought of travelling overseas on a move...

Jarrod

What, are you in the defence forces Jakam? sounds like postings schedule.

[jakam04]

Yup... is that bad ju ju being in defence force lmao.. pays the bills

Jarrod

Nah, I used to work for Defence Housing Authority in CBR a couple of years ago. Had to sort out all the PMKeys rubbish, set up cross referencing systems etc, as well as dealing with the weekly postings data.

[Johnnie5]

2nd dibs on the ZXR rear end please

[jakam04]

Hey Alfie,

Can I suggest something, Although its more work for you. Is it possible that you highlight the changes you make to this topic as each time you change something, it still looks the same lol. Im a lazy reader sometimes and Im sure others are too. If you highlighted the new stuff then there will be no excuse for people not knowing what you have added, but you would have to un-highlight the older bolded stuff and only leave the new items bolded.

Just a thought.

Jarrod

[alfiestorm]

Yeah know what ya mean but most of the updates at the moment are descriptions of stuff when I first put the TL1000s forks on here I forgot to say they require re-chroming. Whats it like getting forks re chromed/coated is it expensive in Auss and are ther many places that do it?
I have had to stop buying stuff now just got a few last cheeky bids on stuff that may come my way and thats it as I have to get everthing packed away. Oh those exhaust cans look even better in the flesh you will love e'm
The day of moving and starting a new life in Auss is getting ever closer ooooohhhhhhh i'm so excited

[jakam04]

quote:Originally posted by alfiestorm

Oh those exhaust cans look even better in the flesh you will love e'm
The day of moving and starting a new life in Auss is getting ever closer ooooohhhhhhh i'm so excited


Awesome mate... cant wait for them lol... and I bet you are excited.. sleepless night? its always exciting getting closer to moving.. if you happen to find a subframe and all the plastics for either an R1 (98-00) or GSXR600/750/1000 k1-k4 for an obscenely cheap price, let me know.

Thanks mate

Jarrod

[alfiestorm]

people that are selling them sub frames over here think they are made of gold going by the prices they want equivalent to au$535 and that is just for the plastics I call them tossers. Having said that you do get the odd gem but you have to be quick :D

[zx12argh]

Hey mate FYI, if you don't already know make sure all the stuff you are bringing over has been cleaned of all dirt and plant matter or customs will charge you a VERY tidy sum for them to steam clean it for you. My brother imported a 2nd hand foam seat from the UK and it was crumbling slightly - they steam cleaned it and just billed him.

[alfiestorm]

quote:Originally posted by zx12argh

Hey mate FYI, if you don't already know make sure all the stuff you are bringing over has been cleaned of all dirt and plant matter or customs will charge you a VERY tidy sum for them to steam clean it for you. My brother imported a 2nd hand foam seat from the UK and it was crumbling slightly - they steam cleaned it and just billed him.


Thanks Pete
I have been very careful to make sure that all parts I have are cleaner than a clean thing from planet clean during a very clean year
:D
The firm I am using to move everything have given me a print out of the requirements from AQUIS and it is very strict for motor vehicles, parts and soft furnishings I have done everything by the book so I should be ok but you never know. I am going prepared and have allowed some cash for unexpected things like this.

Alf

[Seifer]

How much for the ign leads mate

[Seifer]

Hey champ, can you please give me the measurments for the headlights and let me know if it will be possible to slice them in half. When in April are u getting here?

[alfiestorm]

The case size is 115mm high 90mm deep and 170mm wide. You could if you want cut the case in half if you want to mount the lights further apart but I think if you done that you would have to make up something to hold the lights or seal the two halves

http://www.streetfighters.com.au/forum/upload/18166567626838.jpg

http://www.streetfighters.com.au/forum/upload/18166567618890.jpg


If you are interested give me ya best offer for the ign leads and the lights and if it's ok I will reserve them for ya.

Hope to arrive in Adelaide about the 20-04-07

[Phill]

Alfie,
in the pics with the lights in it, top right hand side, what light is that off? looking for a std Honda CBR 1000f rear. They came out with indicators in the sides like that instead of the poxy side mounted ones in Aus.
Phill

[Cruisecontrol]

Are the TL forks still up for grabs?

[alfiestorm]

yep they are still up for grabs

[Cruisecontrol]

http://i25.photobucket.com/albums/c61/hbrady99/MrBurns.jpg

You have mail.

[Large]

quote:Originally posted by Cruisecontrol


You have mail.



Bwahahahahahahahahaaaaaa