View Full Version : single sided swing arm
damo1
14-10-2006, 09:50 AM
ive got a single sided swing arm off a VFR800 with no hub or sproket carrier but it has all the swing arm bearings and chain shields.
looking at about $200 if your interested ill post some pics its in excellent condition like new and undamaged.
03gixxerpilot
14-10-2006, 12:09 PM
damo1 I'm intrested but by no means 100%, if you could post a few pics from above the sides and the froont that would be great,
also if you could include some measurements that would also be awsome, what i'm after is the total width of the swingarm at the front where the bearings go also te distance between the bearings at the front, and last but not least the diameter of the bore where the hub assembly fits
Cheers Clive.
PS How much would postage to Townsville be Thanks.
damo1
15-10-2006, 06:03 PM
ill get on to it asap
03gixxerpilot
15-10-2006, 08:36 PM
thanks mate.
damo1
17-10-2006, 07:29 PM
http://www.streetfighters.com.au/forum/upload/62080496791446.JPG
damo1
17-10-2006, 07:31 PM
http://www.streetfighters.com.au/forum/upload/62080496779229.JPG
damo1
17-10-2006, 07:32 PM
http://www.streetfighters.com.au/forum/upload/62080496782537.JPG
damo1
17-10-2006, 07:34 PM
http://www.streetfighters.com.au/forum/upload/62080496787922.JPG
damo1
17-10-2006, 07:35 PM
http://www.streetfighters.com.au/forum/upload/62080496780097.JPG
damo1
17-10-2006, 07:37 PM
http://www.streetfighters.com.au/forum/upload/62080496779229.JPG
damo1
17-10-2006, 07:43 PM
Theres some pics 03 the measurments are as follows
*out side of swing arm fork where it bolts to frame about 280mm
*inside of fork where you will need a spacer abut 170mm
*hub size is about 115mm
These are rough measurement with a tape measure only so give or take 2/3mm
if you need any more info let me know.
Sorry for the delay.
03gixxerpilot
17-10-2006, 07:51 PM
Thanks damo i'll take a tape measure to what i want to fit it to tomorrow and let you know the out come
damo1
26-10-2006, 09:44 AM
This arm is still for sale!!!!!!!!!!!!!!
03gixxerpilot
26-10-2006, 11:20 AM
sorry for not getting back to you sooner but unfortunatly not going to be useful for what i want.
thanks anyway.
Booster
26-10-2006, 01:36 PM
Damo What is the centre to centre distance (swingarm length)
Thanks
damo1
01-11-2006, 05:16 PM
do you mean from the centre of the swing arm bearing to the centre of the hub??????
sorry for taking so long theres a lot going on at the moment.
Booster
01-11-2006, 07:20 PM
Yes thanks Damo1
damo1
03-11-2006, 01:29 PM
Sorry booster im moving and selling up our unit so its a real prick at the moment.
The measurement is from the centre of the swig arm bearing to the center of the hub
and its about 530mm thats a rough measurement so give or take 3/4mm either way.
Phill
08-12-2006, 09:40 AM
Hey Damo
This arm still for sale?
Phill
damo1
14-12-2006, 07:47 AM
This arm has been sold sorry Phil.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.