k1/k2/k3 or busa swingarm length?

[ozkat]

Can anyone measure a k1/k2/k31000 or maybe busa swingarm for me. i need the length between the centre of the swingarm pivot point and the centre point of the slot in the chain adjuster. thanks.

[Tony Nitrous]

Roughly, with my builders tape...

Busa looks about 575mm
(centre of frame pivot to centre of wheel spindle)
with the wheel about half way through its adjustment.
Might go 7 or 8 mm either way.

Am I good to you ?
F*cking soaked going out to the garage! :D

EDIT: Just remembered. Something about GSXR600 go's into a Busa and is Shorter if I remember right. Something to do with being able to slam the bike lower because its not braced and the Drag guys put +6" or +8" adjusters on to compensate. This may/maynot be correct?


Tony.J.

[ozkat]

Thanks Tony, you are so good to me, now if someone can do the same for the k1-k4 arm for comparision. Tony if you want a bed for the night at the BBQ your more than welcome to stay.

[Large]

K4=55cm

[ozkat]

hmm interesting. 1100k arm is 565mm, thankyou

[fimpBIKES]

k4= 545mm

TLR= 520mm

[ozR1127]

:Dgot a 1100 k swing arm if ya keen ..ozkat, it the was longest one produced, i think [:I]

[Rich]

Hmmmm.... my phone must be broken [V]

Cheers Rich