slingshot bits and pieces required

[Deano]

gentlemen

after aquiring myself a 750J i am after the following bits to get it track worthy.

gear linkage assy
tacho - any oil cooled model shoud be ok
battery box
88/89 750 ignition module
Fuel tap

thanks again guys

[damo1]

Ah Deano sorry for my ignorance but why do you need
fuel tap

wouldnt you run a straight
through fuel line from the tank to the carbs its not
going to matter if you dont have a reserve tap is it

[Deano]

At the moment mate i got nothing more than a hole in the tank. i would take anything that will allow me to put a couple of hoses onto it and then run it to the carbs.

your right reserve is not needed

[Gsxar]

What about an RGV one Deano - 2 outlets straight no tap :DThats what I use means no reserve tho
http://www.streetfighters.com.au/forum/upload/91617641837401.jpg

[03gixxerpilot]

deano pm me your address i'v got an 86 ( i think ) tacho I'll send it down to you

[Deano]

quote:Originally posted by Gsxar

What about an RGV one Deano - 2 outlets straight no tap :DThats what I use means no reserve tho
http://www.streetfighters.com.au/forum/upload/91617641837401.jpg

jo

that would be fine. you dont have a spare by any chance?
or any one else?

[Gix11]

I've got an '89 1100 tacho and soon a '90 750 one if Clive's isn't what you need.

[Gsxar]

No I dont soz, but will have a ask around for you - think Ross may have a spare battery box I'll check

[Gsxar]

Opps the outlet I have is of a 85 RG 250 and still available from Mick Hone for about $30.
Yep Ross has battery box yours if you want it;)

i dont have any of that shit,$176.89 and its yours

[RR-711]

How bout $200 Davo [:o)]

[Deano]

thanks for the tip jo i will give mick hone a call.

battery box will be great thanks Ross.

[moog]

I've got a std 750 fuel tap you can have if you want it, i changed it for a high flow one

[03gixxerpilot]

http://www.streetfighters.com.au/forum/upload/5141815629715.JPG

G'day deano sorry for the delay in getting back to you here is a photo of the tacho, it's an 86 model and has three wires out of it

1 orange
2 white
3 black with white trace

hope this helps I'll put it in the post tomorrow if you still want it

:)

[Benz]

Deano, I've got an ignition module from '90 750 L If ya want, we can swap, starter coil for module:)

[Deano]

quote:Originally posted by moog

I've got a std 750 fuel tap you can have if you want it, i changed it for a high flow one


moog - that will be great mate will send you a pm

pilot - tops buddy will make good use of that thanks

benz - i feel guilty accepting that deal but if you insist:D I sent the relay late last week so shouldn't be to far away from arriving. will send you a pm

[Benz]

Yeah, I'd feel guilty too:D
All the same, I'll send it off to you by the weekend.
The Starter relay is here, thanx:)

[03gixxerpilot]

deano tacho is on it way as of yesterday (wednessday) arvo

[03gixxerpilot]

how the tacho go, did it do the job that you manted it for

[Deano]

thanks mate it will work a treat i am sure.

i owe you one

[moog]

the fuel taps on its way- ported saturday

[Deano]

Cheers moog, much appreciated

[Deano]

quote:Originally posted by moog

the fuel taps on its way- ported saturday


Tapp just arrived mate many thanks.

the bike was run for the first time last weekend. thank you to all that have helped with sourcing of the required parts. i owe you all several beers :D[8D]

[03gixxerpilot]

soooooo how did it go, well i expect since you have said nothing bad about it

[Deano]

Well it ran. no front end was in it at the time but getting the motor running was a big bonus.

ended up throwing a spare usd front end in it over the weekend and found that the supplied front wheel and discs that came with the bike were more bent than a sydney sider during mardi gras.

not impressed about that