New Digital Dashes (Last Shipment at these prices)

[EXBEN]

http://www.streetfighters.com.au/forum/upload/505942594210680.jpg
GDay all I've just got some of these in stock. They are great value & have plenty of features. This one is 127mm x 80mm x 24mm. RRP is $269 less 10% to you guys. Thats only $242 plus postage.

[EXBEN]

http://www.streetfighters.com.au/forum/upload/50594259489756.jpg
I also have a round version, same features but this one mounts through a 63mm Diameter hole & is 29mm deep. This one is $259 rrp less 10% & thats $233 to you guys plus postage.

[EXBEN]

http://www.streetfighters.com.au/forum/upload/50594259468394.jpg
Side view of the ACE-3853

[EXBEN]

http://www.streetfighters.com.au/forum/upload/50594259450039.jpg
And of the ACE-2853 ( Round ) Black bit is 63mm x 29mm

[EXBEN]

http://www.streetfighters.com.au/forum/upload/50594259467245.jpg
Oh & the 3853 comes apart like this if you don't want to use the idiot lights.

[EXBEN]

http://www.streetfighters.com.au/forum/upload/50594259472304.jpg
Each of them comes with Instructions, a speed sensor, loom & mounting bracket.

[JackTar]

I'll take one of the first ones Ben just give me your account details and I will put the money straight in there.

[Peka]

How does it calculate fuel consumption? Is it like the Veypor units where you have to enter how many litres you put in the tank?

[Cruisecontrol]

quote:Originally posted by EXBEN


I also have a round version, same features but this one mounts through a 63mm Diameter hole & is 29mm deep. This one is $259 rrp less 10% & thats $233 to you guys plus postage.


Ooooh, I have been eyeing one of these off at the Banditmania site for a while. Expect an order very soon.

[fimpBIKES]

63mm = 2.5inch pod?

[EXBEN]

Jack send me a PM with your details & we'll get it happening.
Peka I'll check on that tomorrow
Cruise, PM me when your ready
Fimp, YEP:D

[ozkat]

Hey Benny Boy, Can you get me a 2 step at a reasonable price?

[EXBEN]

A what??

[ozkat]

quote:Originally posted by EXBEN

A what??
a 2 step rev limiter for GSXR 1100 also a electric or air shifter. :D

[TurboKat]

Call me old fashioned but I just use my left foot. [:o)]

[ozkat]

Your going to need alot more than your left foot mate. :D

[JackTar]

How the hell do I send a PM on these forums? Do you mean email Ben?

[Slingblade]

For that money, count me in. I will place an order very soon. How long is the supplied loom Ben? Bit hard to tell in the pic.

[EXBEN]

Yes Jack, Just go to members look for EXBEN I'm on page one click on my name then in my profile it says 'Click here to send an email'
or just email me at ben@extremecreations.com.au

[EXBEN]

Hey Oz did you check with these guys? http://www.rbdrace.com.au/index.cfm

[EXBEN]

quote:nathanleetaylor Posted - 24 Jul 2006 : 21:41:27
--------------------------------------------------------------------------------
For that money, count me in. I will place an order very soon. How long is the supplied loom Ben? Bit hard to tell in the pic.
Dunno I'll have to check tomorrow. Most of it's gonna wire into your dash loom anyway.

[Slingblade]

No worries. I am relocating all my wiring at the moment and the more i can leave under the tank the tidier it will be. How many do you have? I will be ordering in the next fortnight. The square type.

[EXBEN]

Four Rectangle & three round left. But can get more within a coupla days.

[Gix11]

Boring stuff, but just for the record: Click the members name next to his post
(like over there <<<<< where it says Gix11)
and you will go straight to his profile and you can send him an email. - There. Now you know.

[fimpBIKES]

mmm, the temperature gauge on the manufacturers site looks interesting

[JackTar]

Sorry guys I knew how to find the email but I thought there might be an actual PM type thing like on some forums where you have a message bank. Sorry for hijacking the thread Ben.

[fimpBIKES]

online manuals are shite too from the looks of it?

[EXBEN]

Ok I've had a look & the loom is 300mm from the dash to the plugs then 400mm of loom after that.
The fuel gauge uses a 0-100 ohm resistance signal, like from an oem fuel tank float setup. At worst you'd have to add a resistor to get the correct reading.

[EXBEN]

quote:fimpBIKES Posted - 24 Jul 2006 : 23:03:42
--------------------------------------------------------------------------------
online manuals are shite too from the looks of it?

Yeah, the unit come with instructions & a wiring diagram & they are much better.

[JackTar]

Your a champion Ben, got mine today, I will get one of the other fellas to give you a BJ :)

[EXBEN]

Glad you got it but a beer will do.:D

[Slingblade]

Hey Ben, can you get the round one on the acewell website in the alum. housing?

[EXBEN]

There coming, just not in stock yet, won't be long though.

[Booster]

Ben what range of calibration is there for the speed sensor?and the 127x80 is that the screen or whole unit?
Thanks

[Slingblade]

quote:Originally posted by EXBEN

There coming, just not in stock yet, won't be long though.


Do you have a price as yet??

[EXBEN]

Nathan, not a firm price but I've been told they will be bout $360-$380.
Booster, You set your wheel circumference, it has a 1mm - 3999mm range in 1mm increments.
127mm x 80mm total size, screen size is 43mm x 65mm.

[fimpBIKES]

any idea on a price for the temperature gauge of thiers ben?

[Slingblade]

Hey Ben. I am ordering a square one this week. What has the feedback on them been like?? Send me an email with your account details and i can whack the money in for you.

[fimpBIKES]

dont worry 'bout me
shall be using a cheapo gauge now

(wish i had the $$$ for one though...)

[EXBEN]

Ok. I've just received the next shipment of Dashes.I've also just been advised that the RRP has gone up to $279 for the ACE3853 & $269 for the ACE2853. But since Im such a nice bloke your prices won't change till the next shipment,so get in quick!

[EXBEN]

If anyone has bought an Acewell dash & is having problems with the Tacho jumping all over the shop the fix is to put a 1M ohm resistor in the yellow line from the Tach signal. That's a 1 mega ohm resistor. You can get one of these from Jaycar or Dick smith for about 25c. Apparently the reason for this is the dash's are suited to any type of ignition system & the CDI systems have a strong signal that can cause interference so the resistor acts as a noise filter.
I'll be supplying a resistor with each dash from now on.

[Slingblade]

A 1meg resistor? Gee thats hefty for a low voltage signal. Is it on any particular bike Ben? I have the unit wired but i havent started it yet as no fuel tank. I guess i will see soon enough.

[EXBEN]

So far it's been needed on a Ducati monster & a ZXR but I'm thinking most CDI systems are going to need it. This info has come direct from Acewell's tech department, a lot of these company's seem to forget to put this kinda info on the instructions.???

[pavel]

hey, im thinking of getting one of those roundies for my gpz1100, qould they wire up ok since its all digital?..and more importantly....are they still available? lol
cheers :D

[EXBEN]

Pavel
They are designed to fit any bike, yes they are still available.
Send me a PM if you want one.

[bprib]

Hi, can you get the dash which has the temperature gauge?

[bprib]

hi, sorry more specifically, can you supply te square type dash that has the digital temperature gauge/spedo reading as shown on the acewell site and if so how much? also can the magnet/sensor be placed on the rear wheel instead of the front? cheers.

[EXBEN]

bprib, they don't do a rectangular speedo/temp gauge. Or maybe your seeing something I'm not??
The speed sensor can be fitted to either wheel.

[bprib]

exben, I've had another look, on the uk site is an model ace-3915 which can display a temperature or the spedo reading, sorry I didn't have a better look earlier. Will you bring this model in and if so how much price difference will there be? Thanks.

[EXBEN]

I'll check with the importer on monday.

[notguilty]

Still doing deals?

[EXBEN]

Yes I do offer a discount to ASF members.
Oh & hello & welcome to the forum.

[Quackasaki]

are you still doing the deal for the ACE-2853 ( Round )for $233 to asf members? if not can you notfie me of the new price and the best way to pay for it.

[EXBEN]

Quacka, The round ones are now $243.
Email sent.

[cutcat]

Hi Exben, are the ACE3753 or 3853 still avilable and how much delivered?

Cheers and beers.

[EXBEN]

Cutcat, yes I've got some 3853's in stock $263 delivered.

[zx12argh]

Hi Exben,

Just wondering if you have any of the 2853's left? Also do you have any of the mounting pods the manufacturers show on they're website? Do you know if these are suitable to mount on a set of renthals?

Cheers

[EXBEN]

Yeah got the 2853's but not the pod version. It's 2 1/2" dia,you could use a pod from an auto shop tho.Send me a PM if you want one.

[zx12argh]

hey ben,

I tried to email you but its saying the email bounced from my email address so not sure if you got it.

I'm dead keen to get one of your speedo's (the 2853 acewell not a pair of budgie smuglers)

so if you could email me and let me know what you need that would be great.

cheers

[zx12argh]

Hey got the Gauges a day earlier then I expected and hooked up like a charm. Thanks Ben awesome service!

Just one question - any idea what resistor I should put in for the fuel guage? Its constanly registering as empty...

[EXBEN]

zx12argh, The ZX12's fuel sensor reads 126ohms on empty & 8-10ohms on full, which should be close to perfect for the dash which requires a 0 ohm reading on full & 100 ohm reading on empty.( you may want to bend the float arm down slightly so it doesn't read empty too early)
Check your wiring first, then you may want to check that the float sensor is giving the correct reading.

Ben i will take 3 of the 3769's,please email me your credit card and p.i.n number asap so i can transact the withdrawl process thru my data base.(up-load the mega gig via the cyber ram then transfer the digi-watts to smegma-jiz).

[RUSS M8]

quote:Originally posted by davo

Ben i will take 3 of the 3769's,please email me your credit card and p.i.n number asap so i can transact the withdrawl process thru my data base.(up-load the mega gig via the cyber ram then transfer the digi-watts to smegma-jiz).


HAHAHA ROFL!

[EXBEN]

quote:davo Posted - 28 Oct 2006 : 01:23:51
--------------------------------------------------------------------------------
Ben i will take 3 of the 3769's,please email me your credit card and p.i.n number asap so i can transact the withdrawl process thru my data base.(up-load the mega gig via the cyber ram then transfer the digi-watts to smegma-jiz).
Back in your cage Davo........Good boy.:D