bored

[arbee]

hey guys i`ve finished my slabbie, all back to original`cept for the colour.problem is i`m a bit bored now and i was sitting in the shed thinking...i got a 1200 bandit engine sitting on the bench ready to go. how much difference will it make in the slabbie(85 model) how much power gain should i get.is it worth the effort? or should i just get on and ride the thing and just have some fun? I`m an old fart nowadays and it only takes half the effort to scare the bejesus outta me. whatya reckon?;)

[Gix11]

Too be honest mate, if the engine still runs well, I doubt if you'd notice a lot of difference, unless it's a 750 motor you have in there at the moment, and if that's the case, go and get the tool kit warmed up!

[Gix11]

Too be honest mate, if the engine still runs well, I doubt if you'd notice a lot of difference, unless it's a 750 motor you have in there at the moment, and if that's the case, go and get the tool kit warmed up!

[BOHEMION]

build a frame to suite a new Easter Speacial Fighter :D:D:D oh and plenty of boooze

[BOHEMION]

build a frame to suite a new Easter Speacial Fighter :D:D:D oh and plenty of boooze

[Gix11]

Are you pissed Rick?

[Gix11]

Are you pissed Rick?

[BOHEMION]

HAHAHAHAHAHA uummmmm when arnt I?

[BOHEMION]

HAHAHAHAHAHA uummmmm when arnt I?

[arbee]

yeah it was a 750.well i started doin it, old motor out new one in,exhaust on just gotta do electrics and carbs now.if i can get the ruggies to bed early will get back into it.

[arbee]

yeah it was a 750.well i started doin it, old motor out new one in,exhaust on just gotta do electrics and carbs now.if i can get the ruggies to bed early will get back into it.

[arbee]

the brass tube on the side of 36cv`s whats it for?

[arbee]

the brass tube on the side of 36cv`s whats it for?

[03gixxerpilot]

can't help with the brass tube Q

where are the pics sounds like it could be a nice looking bike

[03gixxerpilot]

can't help with the brass tube Q

where are the pics sounds like it could be a nice looking bike

[arbee]

well i did it all swapped over what a pain in the arse.. just got to get it to run better has a big deadspot at half throttle so now just got to sort that out..can ride through flat spot if ya turn throttle slower, then it comes good all the way up the revs..brass tube is fixed only works the choke on that cyl....anyway back to the shed...

[arbee]

well i did it all swapped over what a pain in the arse.. just got to get it to run better has a big deadspot at half throttle so now just got to sort that out..can ride through flat spot if ya turn throttle slower, then it comes good all the way up the revs..brass tube is fixed only works the choke on that cyl....anyway back to the shed...