PDA

View Full Version : jetting problems 89 1100 PLZ HELP!


spoonman
28-03-2006, 11:27 AM
i am modifying my 89 GSXR1100 at present. i have removed the airbox and replaced it with K&N filters. Now it is suckin way to lean! Just wondering if anyone could help with jet sizes? i have currently 122.5 standard jets. and would i need to alter the needle height? any help would be awesome, ta
28-03-2006, 09:00 PM
you need a stage 3 jet kit. hit the search link at the top of this page and type "pod filters".Then book your bike in at the local dyno shop...cheers and welcome;)
28-03-2006, 09:00 PM
you need a stage 3 jet kit. hit the search link at the top of this page and type "pod filters".Then book your bike in at the local dyno shop...cheers and welcome;)
Gix11
28-03-2006, 11:06 PM
This one might help: http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=569&SearchTerms=pod,filters

Also, if anybody has like a chart or jet size to pod filter list and wants to send me a write up for the HOW TO section of the site I'd appreciate it. (Even if it means "borrowing it" from our friends at Old Skool)
Gix11
28-03-2006, 11:06 PM
This one might help: http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=569&SearchTerms=pod,filters

Also, if anybody has like a chart or jet size to pod filter list and wants to send me a write up for the HOW TO section of the site I'd appreciate it. (Even if it means "borrowing it" from our friends at Old Skool)
spoonman
29-03-2006, 01:52 PM
i have done a little homework with these stage 3 kits. Firstly the Dynojet kit part #3136 is listed for my bike on dynojet.com, but after i emailed them they directed me to serco.com.au and they have got part #3127 listed for my bike(89-90models)and part #3136 for the 91-92 models. i spoke to a dyno guy in melbourne and he said they just wear out ya slides in 4000k's... so im quite at a loss as to what to do
spoonman
29-03-2006, 01:52 PM
i have done a little homework with these stage 3 kits. Firstly the Dynojet kit part #3136 is listed for my bike on dynojet.com, but after i emailed them they directed me to serco.com.au and they have got part #3127 listed for my bike(89-90models)and part #3136 for the 91-92 models. i spoke to a dyno guy in melbourne and he said they just wear out ya slides in 4000k's... so im quite at a loss as to what to do