BILLET TRIPLES will not be made for sale - sorry

[Deano]

finally after about 6 months of fucking around with designs i have finally had a set CNC machined and this is the result

they will fit a water cooled Gsxr or slingshot model with a 2000mod or newer front end.

[Deano]

http://www.streetfighters.com.au/forum/upload/43591245129090.jpg

this was the solid works model that i had drawn up

[Deano]

http://www.streetfighters.com.au/forum/upload/43591245129090.jpg

this was the solid works model that i had drawn up

[Deano]

http://www.streetfighters.com.au/forum/upload/43591245197862.jpg

and these were the results

[Deano]

http://www.streetfighters.com.au/forum/upload/43591245197862.jpg

and these were the results

[God]

Geez Deano,

Looks like they did a dodgy job - I mean look at all the scratches on the bottom clamp...

[God]

Geez Deano,

Looks like they did a dodgy job - I mean look at all the scratches on the bottom clamp...

[Deano]

http://www.streetfighters.com.au/forum/upload/435912451100080.jpg

[Deano]

http://www.streetfighters.com.au/forum/upload/435912451100080.jpg

[Deano]

wont get to polish them till i get back from the fools run but even raw they look trick

[Deano]

wont get to polish them till i get back from the fools run but even raw they look trick

[God]

Sorry Deano,

Crap joke on my behalf.

Will you be getting some new coloured bars?

[God]

Sorry Deano,

Crap joke on my behalf.

Will you be getting some new coloured bars?

[TurboKat]

I bought a set that look EXACTLY the same as them last night from K-Mart for $19.99.
Seroiusly though, you CAN'T polish those beautiful CNC marks out mate, that looks dead trick [:p]

[TurboKat]

I bought a set that look EXACTLY the same as them last night from K-Mart for $19.99.
Seroiusly though, you CAN'T polish those beautiful CNC marks out mate, that looks dead trick [:p]

[BOHEMION]

Fuggin hell Deano, They are awesome!

[BOHEMION]

Fuggin hell Deano, They are awesome!

[sluglie]

very noice indeed, hmmmm good old solidworks it always comes up trumps

[sluglie]

very noice indeed, hmmmm good old solidworks it always comes up trumps

[Deano]

as with clutch covers if enough people are intrested i will do some to sell

not worth it unless i can sell 6 or more sets

[Deano]

as with clutch covers if enough people are intrested i will do some to sell

not worth it unless i can sell 6 or more sets

[BOHEMION]

When ya fittin em Deano?

[BOHEMION]

When ya fittin em Deano?

[Large]

quote:Originally posted by Deano

as with clutch covers if enough people are intrested i will do some to sell

not worth it unless i can sell 6 or more sets


Beautiful work Deano.

Have you got a ballpark $ figure?

If everything else was the same dimensions, could the machine be setup to cut for different diameter forks?

[Large]

quote:Originally posted by Deano

as with clutch covers if enough people are intrested i will do some to sell

not worth it unless i can sell 6 or more sets


Beautiful work Deano.

Have you got a ballpark $ figure?

If everything else was the same dimensions, could the machine be setup to cut for different diameter forks?

[Gix11]

Give us a cost mate (for a set to fit some USD forks) and I'm in. Wanted a set for the other bike.

[Gix11]

Give us a cost mate (for a set to fit some USD forks) and I'm in. Wanted a set for the other bike.

[Captaintoc]

Hmmm

I'd be up for a set dependent on cost and maybe one of them clutch windows.

If ya trust a Noob :D to deal with.

Have Fun
Andrew

[Captaintoc]

Hmmm

I'd be up for a set dependent on cost and maybe one of them clutch windows.

If ya trust a Noob :D to deal with.

Have Fun
Andrew

[Deano]

the jig that was made for this set (k series gsxr) cant be changed easily.

if an adjustable jig was able to be made then you could make any ford dia and spacings.

I only have to change the fork dia and the offset in the solidworks drawing and then every other deminsion will change to suit.

at the moment i have got drawn up early gsxr USD.

the set pictured is made to use the early stem (25mm top bearing 30mm bottom bearing) so that way i you can use the newer k series front end and still retain the orignal bearing sizes

this set is quite expensive @ $1100.00. but as we no quantity is king so the more i make in a batch run the cheaper they are to sell.

I can easyly modify my solidworks design and come up with a cheaper set if demand is there.

if I could come up with a set of USD gsxr triples for about $600-$700 would there be more intrest?

[Deano]

the jig that was made for this set (k series gsxr) cant be changed easily.

if an adjustable jig was able to be made then you could make any ford dia and spacings.

I only have to change the fork dia and the offset in the solidworks drawing and then every other deminsion will change to suit.

at the moment i have got drawn up early gsxr USD.

the set pictured is made to use the early stem (25mm top bearing 30mm bottom bearing) so that way i you can use the newer k series front end and still retain the orignal bearing sizes

this set is quite expensive @ $1100.00. but as we no quantity is king so the more i make in a batch run the cheaper they are to sell.

I can easyly modify my solidworks design and come up with a cheaper set if demand is there.

if I could come up with a set of USD gsxr triples for about $600-$700 would there be more intrest?

[Captaintoc]

Yep is as I thought bit out my price range at the present but maybe a bit later on I'll give you a yell.

Thanks
Andrew

[Captaintoc]

Yep is as I thought bit out my price range at the present but maybe a bit later on I'll give you a yell.

Thanks
Andrew

[Deano]

unfortunatly i wont be fitting the new front end for the fools run

will post up some photos soon

[Deano]

unfortunatly i wont be fitting the new front end for the fools run

will post up some photos soon

[Zed14]

is it soon yet?

[Zed14]

is it soon yet?

[Razorback]

Excellent work Deano... BTW whats the go with the window clutch covers.. Im still keen if they are available.

[Razorback]

Excellent work Deano... BTW whats the go with the window clutch covers.. Im still keen if they are available.

[Deano]

The clutch windows are still on the go

i have faxed and emailed the engineers drawing to 3 different people for quoting.

i haven't heard back form any of them and it has been about 6 weeks.

i call them each week and get the run around.

the guy that made the first one hasn't even bothered to quote it.

rexie - it may be sooner than you think.

[Deano]

The clutch windows are still on the go

i have faxed and emailed the engineers drawing to 3 different people for quoting.

i haven't heard back form any of them and it has been about 6 weeks.

i call them each week and get the run around.

the guy that made the first one hasn't even bothered to quote it.

rexie - it may be sooner than you think.

[clairebear]

very sexy!

[clairebear]

very sexy!

[fimpBIKES]

if u want to send me drawings i could see about getting a quote from some of our subbies if u want

[fimpBIKES]

if u want to send me drawings i could see about getting a quote from some of our subbies if u want

[Deano]

Got on the phone agian this morning and started to get some answers. all is good

[Deano]

Got on the phone agian this morning and started to get some answers. all is good

[dinorider]

sensaish mate.will be looking for something like that in the future but yeah bit exy at the moment as I have too many projects going at once.

[dinorider]

sensaish mate.will be looking for something like that in the future but yeah bit exy at the moment as I have too many projects going at once.

[dinorider]

sensaish mate.will be looking for something like that in the future but yeah bit exy at the moment as I have too many projects going at once.

[dinorider]

sensaish mate.will be looking for something like that in the future but yeah bit exy at the moment as I have too many projects going at once.

[Deano]

as i mentioned in an earlier post i am investigating a cheaper set if you guys are keen hopefully 500-600 bucks is anybody keen?

[Deano]

as i mentioned in an earlier post i am investigating a cheaper set if you guys are keen hopefully 500-600 bucks is anybody keen?

[dinorider]

Yes I am interested.especially if you can get that price to what you said.:)

[dinorider]

Yes I am interested.especially if you can get that price to what you said.:)

[suxukifreak]

I will be in for a 1400 set [:p] [8D]

[suxukifreak]

I will be in for a 1400 set [:p] [8D]

[Gix11]

You know I'm in mate.

[Gix11]

You know I'm in mate.

[Deano]

not sure about the 1400 as i don't have details on the fork dia and offset and steering stops.

mostly just slingshot and early water cooled

[Deano]

not sure about the 1400 as i don't have details on the fork dia and offset and steering stops.

mostly just slingshot and early water cooled

[suxukifreak]

quote:Originally posted by Deano

not sure about the 1400 as i don't have details on the fork dia and offset and steering stops.

mostly just slingshot and early water cooled
Thats the trouble with trying to be different :( ;)

[suxukifreak]

quote:Originally posted by Deano

not sure about the 1400 as i don't have details on the fork dia and offset and steering stops.

mostly just slingshot and early water cooled
Thats the trouble with trying to be different :( ;)

[Deano]

If you are able to send me a set so that i can check them out and get the details then no probs. happy to have a go

[Deano]

If you are able to send me a set so that i can check them out and get the details then no probs. happy to have a go

[Deano]

do to only a small response i will not be making these triples for general sale. I apoligise for the inconvience

[Deano]

do to only a small response i will not be making these triples for general sale. I apoligise for the inconvience

[fimpBIKES]

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?

[fimpBIKES]

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?

[Deano]

quote:Originally posted by fimpBIKES

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?


No sorry mate

[Deano]

quote:Originally posted by fimpBIKES

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?


No sorry mate

[TurboKat]

Geez Deano, what a letdown. [V]
I was saving all my 5 & 10c pieces in a special piggybank with Billet Triples written on it, now what will I do with all that money [?]
Bastard. ;)

[TurboKat]

Geez Deano, what a letdown. [V]
I was saving all my 5 & 10c pieces in a special piggybank with Billet Triples written on it, now what will I do with all that money [?]
Bastard. ;)

[Deano]

quote:Originally posted by turbokat

Geez Deano, what a letdown. [V]
I was saving all my 5 & 10c pieces in a special piggybank with Billet Triples written on it, now what will I do with all that money [?]
Bastard. ;)


buy one of my window clutch covers;)

[Deano]

quote:Originally posted by turbokat

Geez Deano, what a letdown. [V]
I was saving all my 5 & 10c pieces in a special piggybank with Billet Triples written on it, now what will I do with all that money [?]
Bastard. ;)


buy one of my window clutch covers;)

[dinorider]

that`s ok deano,will just have to get that other set from jmc(I think).

[dinorider]

that`s ok deano,will just have to get that other set from jmc(I think).

[fimpBIKES]

quote:Originally posted by Deano


quote:Originally posted by fimpBIKES

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?


No sorry mate


also fair enuff [:I]

[fimpBIKES]

quote:Originally posted by Deano


quote:Originally posted by fimpBIKES

fairy nuff mate

any chance u could throw up some drawings in case anyone gets ambitious?


No sorry mate


also fair enuff [:I]