PDA

View Full Version : front wheel spacers/speedo pick up for gsxr



crazymofo
03-03-2006, 04:44 PM
gday all

im just chasing the spacers and speedo drive pick up for the front wheel of a 1992 gsxr 750

these are the last bits i need for the front end! so if you knwo of any going, or have some, or even know of another model bike thats parts are suitable, let me know!!

thanks ppl

cheers.joe.

devo
03-03-2006, 05:19 PM
Hi Joe,
Dave here, I just checked the compatabilty of the bits you need
for your bike.
The part # for the spacer is 54740-17c00 and the speedo drive #
is 54600-17c01.
Give my sponsor a call at Cambelltown Motorcycles on 02 4626 6857
I know he has them because I stripped the bike for him they will be
of an 1100 94 model just tell him they should be in the box of bits and
pieces left over from the bike.
Cheers,
Dave.

crazymofo
04-03-2006, 10:30 AM
gday dave,

thanks for that info mate!

unfortunatly, after a phone call to Cambelltown MC, they dont have them anymore apparently, so thats a dead end :(

aw well no worries, thanks anyway bloke.

cheers.joe.

Gix11
04-03-2006, 02:04 PM
I might have a speedo drive off my '89 1100 in the next couple of weeks if that's any good to you? Have to check I can find a electronic unit for it first then I'll let you know.

crazymofo
05-03-2006, 09:41 PM
ok thanks gix, appreciate it :)

let me know how you go.


actually.. another option might be, if someone could take some dimensions with a vernier capiler of the spacers and speedo pick up, that would also be fine, as i can then make up some to suit.


cheers.joe.

Gix11
05-03-2006, 10:00 PM
The speedo drive unit is 35mm wide mate. The other spacer is built into the axle.

crazymofo
05-03-2006, 11:10 PM
great thanks gix! wouldnt have the interal and external diameters of it as well would ya?

cheers.joe.

Gix11
05-03-2006, 11:24 PM
The ID is 20mm (axle) and the OD of the whole unit id 66mm (although I'm not sure why you would need that) and on a quick re-measure then, the actual width of the drive on the axle (the size of the spacer you would need to replace the unit) is 34mm and not 35mm as I mentioned before.

crazymofo
05-03-2006, 11:35 PM
thanks bloke! :D

exactly what i needed.. guess i'll get busy tomorrow

cheers.joe.

devo
06-03-2006, 05:46 AM
Go to this link it tells you what parts are there for your
front wheel http://www.alpha-sports.com/suzuki_parts.htm
Dave.