GSXR1100 bit needed

[Deano]

i am in the market for the following GSXR1100 parts

sprocket cover
clutch lever and master cyclinder
clutch hose

it will be going on a 1100w but i think the oil cooled clutch parts will be the same
thanks

[God]

Hey Deano,

Sounds like you're getting ready to power up the Gixxer or have you started another project?

[Deano]

you would be right hornet boy!..................

[God]

Err riiiight.

New project/new fighter?

More power for the exsiting beast?

[Gix11]

Hey Deano, did you get one of those 1100 motors then? You animal you....

i have a clutch hose Deano.its my old standard length 1. i'd normally sell it for around $250 but coz ya such a good bloke its free.includes banjo bolts so if ya want it e-mail me your address an i'll post it to ya.aint got a master cylinder yet till i get my new ones.

[Deano]

Davo - I don't know if a standard length one will fit maybe munday or J7/11 may be able to help me there?

you got it in one Gix.

brought a 1100w motor

the fun begins

[Gix11]

Oh yes it does mate. Yes it does..........!

[Deano]

http://www.streetfighters.com.au/forum/upload/GSXR2.bmp

isn't it pretty

standard length fitted mine with raised bars an still had a few inchs to spare,it was on there on the coffs run.it measures 1120mm between centres.my new lines r 6" over an waddayaknow it measures 1270mm.anyhow,its there if ya want it.

[Deano]

thanks mate
if it fitted with your raised bars then i think it will be fine on mine

you have mail

no worries mate,i'll launch it this friday if i get time.;)

GOOD move mate.I polished off that Penfolds ya bought me & it was VELVET!
Very nice mate,thank you.

[TurboKat]

Hey Deano, did that motor come from Vic Wreckers?

[Deano]

yeah mate jap import i beleive

[Deano]

Good stuff Mundy glad you enjoyed it.

Hey Davo - what new master cyl you getting?

just aftermarket MCS,but with annodised alloy screw caps. havnt looked around much but these ones r cheap,i'm not really fussed as long as i can bleed the system without having to remove it and strap it to my lawnmower so the fluid is level. got any tric ones you know of Deano?

[Deano]

Davo

have MCS got a website? and how much? it sounds like something i could do with

i have bid on a master cyclinder on ebay US at the moment it is up to 11.00US and the same guy has a sprocket cover that to up to 11.00US
so we will see.

[Deano]

if you having trouble with the bleeding of brakes and clutch you need one of these bad boys

we sell them for about $115.00

http://www.jwl.dk/show-site.asp?Page=5&Product=trykluft

not sure about the web site,i'll check 4 ya,could be under "offroad imports". they do universal mc's in steel an plastic reserviors.the caps r from UK. mc cost about $120 each or cheaper if ya rootin someone in a bike shop.

the only problem i have bleedin brakes is that my master cylinder is now on a 45degree angle due to fat bars. kinda hard to keep fluid from spillin everywhere. i got 1 of them bleeder bottles, cost me $4.50 from a liquidators sellout.left it on the shelf in the garage and the mother in law thought it was a bong.:D

[Gix11]

Be interested to know what you come up with for master cyclinder, as you know I have the same problem. Started using your lawnmower handle idea the other day Davo! Works a treat mate, just looks fuckin' stupid when your mates come round and there's a master cyclinder bolted to the push bar...

[Deano]

Sounds like something i will have to investigate davo

the bike shop around the corner deals with MCS so i might go around there and see what i can come up with.

i missed out on the mastercyclinder on ebay i didn't want to go over 30.00us for it.

[qickdraw]

Hey guys - if you want a new m/c I've got these Rizoma jobbies -
http://www.austreetfighter.com.au/scart/html/208.html
I can do just the cylinder, too, if you don't want the hose.....

[Deano]

looks good but cant justify the dollars

spoke to damaige on the weekend and have decided to copy what he has
so i am now in the market for a late model ZX9 master cylinder and seprate resevoir?

went and checked out the MCS cataloge and could only find a universal brake master cylinder.

[Deano]

got the clutch hose Davo

cheers mate owe you one.

no worries Deano.


hey Stu, i'm after complete m/c's as my old ones are bulky and fucked.that link you threw up only shows reservoirs,do they do a complete unit? also does aerotek do them annodised reservoir caps on their own? seen em somewhere,but you no me mate,massive brain fade 24/7.;)

quote:Originally posted by Gix11

Started using your lawnmower handle idea the other day Davo! Works a treat mate, just looks fuckin' stupid when your mates come round and there's a master cyclinder bolted to the push bar...
mate,its a whole new aspect in grass manicuring. think i might have just invented the "LAWN FIGHTER".my neighbours are envious of my hi-rise clip-ons and brake/clutch lines that i've addapted.gives maximum control so i can mow the lawn with 1 hand while drinkin beer with the other.might even slap my old fairings on it and call it a "Lawn Poofter".;)

[Gix11]

That's it mate! Now I have an idea of what to do with my old fairings! I'll create me a Lawn Poofter too. I think I've even got some carbon fibre look mirrors lying around that would go a treat on it....

sounds kool mate,we should form a team and enter the Aussie lawn mower championships.along with Huddo,"the National Grass Cutting Champion" on his "Grass Bandit".Ozkat will probly join us with some kinda turbo Victa 2 stroke.[:o)]

[Gix11]

Yea, but he'll be cutting sugar cane.....

[ozkat]

gix dont do anything with that black plastic stuff. i may have a use for it.

and he's sold his fairings. maybe he can enter the sugar daddy class with ":Sweet Lips" painted on his lawn faggot.oh sorry Shaynno,forgot your mrs owns the mower.:D...piss take mate,you know me[B)]

whats this,a use for the old faggot parts? sorry mate,i've started a new craze. lawnpoofters.com.au. give it time an the europeeins will be sellin parts to suit your extreme carpet shaver.[:X]