Bolloxed

[exile]

Hi folks, im after so advise please....
Ive got these 5.5"Oz wheels aparently off a K1 750, the cush drive looks like standard Suzuki and ive been told that all K series sprocket carriers will fit
http://i3.photobucket.com/albums/y61/exile711/oz1.jpg

[exile]

So i got this off ebay from a K3 1000
http://i3.photobucket.com/albums/y61/exile711/oz2.jpg

[exile]

http://i3.photobucket.com/albums/y61/exile711/oz3.jpg
And it dont fit :(Whats wrong here?? Is there a difference between the 5.5" and the 6" wheel sprocket carriers??

[Cruisecontrol]

Wherefore art thou cushes?

[exile]

Surely the lip on the sprocket carrier should be sitting flush inside the hub thou even without the cushes??? This is my first attemp at striping/rebuilding a wheel and im flying blind without a manual with only my Bandit as reference [?]

[exile]

Aparently there are 2 types of sprocket carriers, i need the skinny one that takes 10mm thick cush's.....sortid;)

[Hillsy]

Well they obviously dont match [V] It's possible the wheel might have been machined down on the cush drive side to move the chain line?? I guess you'd need to see the cush rubbers of both models to work out if that's happened (or check if they're the same part number).

[Zed14]

so just machine down the bits that sit in the rubbers.

[madmaxman1986]

what rexie said, no big deal.

[exile]

WELL DER...and then cut the cush drive rubbers to suit [?]
how about identifing the wheel to the correct sprocket carrier[:o)]

Wheel(old)Carrier(new)simple;)