1994 gsxr 750

[bluedrags]

Does anyone know someone that can tig in Wollongong area for beer or money at a good price.

[bluedrags]

Thinking of dual exhaust, I know it will add more weight but I'm not to worried if it does.
http://i305.photobucket.com/albums/nn209/bluedrags/d6dd443d.jpg
http://i305.photobucket.com/albums/nn209/bluedrags/e41f109e.jpg

[RevHead]

looks good ,

[bluedrags]

Yer Pete cut a few fittings off rear to get your old ductail to fit, just need to get some extra fittings welded on to hold it down.
Bidding on eBay for a seat locking latch to make it easy on and easy off.

[RevHead]

il post you one tomorrow for free if you want

[bluedrags]

That would be great thanks heaps.

[RevHead]

11341135hope these help

[bluedrags]

Sure does I was wondering how to do seat section.
Any luck with the seat lock Pete.

[bluedrags]

What's the flat section across the back of the frame for.

[RevHead]

the lock is in the mail,
the flat is alloy strap that i bent up to support the rear tail section ,i drilled it and screwed it into position ,and made all the other brackets ,also screwing them into position,then i had a mock up fit just to check everything fitted ,then i took the subframe to our local metal land and got them to tig it up for me ,it cost me $60 for this ,
my metal land up here is an engineering shop as well.

[bluedrags]

Ok thanks Pete might have to do the same.

[bluedrags]

I was paint stripping rims today to get ready to paint and found out that the out side of rim is polished so might just paint inside black and keep out side polished.
http://i305.photobucket.com/albums/nn209/bluedrags/cfaeff02.jpg

[LKC73]

Nice Blue, most motorcycle wheels are machined on the outter edges, this makes it shit loads easier to polish. Go nuts mate and it will look great.

[bluedrags]

Yer that's the third colour on the rims that I got down to looks like the couldn't decide which colour they wanted.

[bluedrags]

I think I'm going to go with single exhaust.
Can you paint mufflers as the one I have is a bit tarnished on one side.

[RevHead]

heat proof paint ,supercheap,repco sell VHT

[bluedrags]

Has anyone heard of these ?.
http://www.ebay.com.au/itm/ECHAPPEMENT-CARBONE-GP-Suzuki-GSXR-1100-89-92-EX120-/150537937131?pt=FR_JG_Moto_Pièces&hash=item230cc2a0eb#ht_5388wt_946

[Fight_fan]

Danmoto is ok mate. Pretty sure banditrod got an exhaust off him a while back. I'v bought rear sets off the guy too.

[RevHead]

Danmoto is ok mate. Pretty sure banditrod got an exhaust off him a while back. I'v bought rear sets off the guy too.,ive bought my led blinkers and stop light off him ,and my bar mounted mirrors,plus a few things that no longer grace my bike ,

[bluedrags]

Is there a reason for that revheadpete.

[RevHead]

hes trust worthy ,i mean i updated things ,sorry about that
i bought led blinkers ,but bought different 1s off him and changed them.
i bought a digital speedo off him but went back to an original suzuki speedo unit
i also bought handle bar mounted mirrors off him ,but changed those to smaller end bar mirrors

[bluedrags]

Got the motor in today.
http://i305.photobucket.com/albums/nn209/bluedrags/a37503a9.jpg
Yes it is revheadpete's old ductail.
Wheels will be next just need some new disc's and caliper kit then get rear sorted.

[hooligan]

that tail looks really long in that pic. it might be because there's no tank or headlight, but i think the tail is too far past the back wheel. But as always, it's not my bike.

[bluedrags]

Only had it sitting on there needs to move up a bit and could be because there's no tank.

[RevHead]

when i had it on my bike i had to cut a fair bit off the rear subframe ,your right Chris,the seat should mount up perfect with the rear of the tank,give me a pm if you need any info

[rod185651]

Mate, Pete replaced the tail for a reason... It never looked quite right on the gixxers. i think after all the work you have put in so far you should rethink what seat and tail you are going to use.

Have you tried the zx6R tail?

[bluedrags]

Not real sure how to fit it without welding tags.
Has anyone fitted one before that you know of?.

[bluedrags]

Does anyone know how or who has fitted an later model speedo to earlier gsxr.
As I have a speedo from a gsxr1000 2000 something model and would like to fit to my bike.

[bluedrags]

First wheel painted just need to polish outer ring then get onto front.
http://i305.photobucket.com/albums/nn209/bluedrags/a2d3bdef.jpg

[RevHead]

good job fella.

[K6Thou]

Does anyone know how or who has fitted an later model speedo to earlier gsxr.
As I have a speedo from a gsxr1000 2000 something model and would like to fit to my bike.

2000 model would be digital yeah ? and yours would have been cable driven. If you could get your hands on the sender unit for the digital one you might have a chance.....

[bluedrags]

Thinking of chopping up speedo cluster just wondering if they are hard to get and should I find something else or go for it?.

[bluedrags]

Does anyone know how to join foam together and what sort should I use for building.

[Gix11]

Foam for making a mold or foam for a seat?

[bluedrags]

Foam for making a mould.

[Gix11]

Aha, that old one, ok, try these:

http://www.streetfighters.com.au/forum/showthread.php?7052

http://www.streetfighters.com.au/forum/showthread.php?1641


(http://www.streetfighters.com.au/forum/showthread.php?7052)

[bluedrags]

Just won this and eBay might work.
http://www.ebay.com.au/itm/320868378430?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_500wt_922

[bluedrags]

Does anyone know where to get cheap jets for carb and what stage should I go with pod filters.

[bluedrags]

Just fitting things to see how they look.
Anyone got a old jetting kits that they are looking at selling?.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0006-1.jpg

[Chase]

Yeah put the ZX6 tail on.. you can finish off with a neat undertail exhaust then too ;)

[hooligan]

much better.

[bluedrags]

Has anyone fit a 2001 gsxr swing arm to a 94 gsxr?.

[RevHead]

ive got a 2001 swinger, you do yours first then i will do mine ,

[bluedrags]

Have to see if I win it on eBay first.
The measurement at pin is the same so good start.

[RevHead]

i know this,ive been told that you use all the 94 swinger bushes and 94 swinger pivot bolt ,

[bluedrags]

Even better just bidded on it on eBay highest bidder so far so if I get it on it goes.

[bluedrags]

Can you fit a k1 speedo to my gsxr without to much dramas?.

[bluedrags]

Just trail fitting rear end just wondering if there is a certain height that it has to be in NSW.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0009.jpg
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0010.jpg

[xa-mont]

its got to be the hight that looks sexiest... that's the official ruling.

[Chase]

Looks like you'll need to move the cowl back to fit the tank and seat on, but if you keep that angle the top of the cowl should come nicely online with the top of the tank ;)

[bluedrags]

Yer that's what I was thinking just sat it there to have a look first time doing this sort of stuff any help is greatly appreciated.
Anyone got an old zx6r seat that's not wanted.

[Chase]

If you use the original seat it will sit against the tank well and you can get big Kev to recover and trim it down a bit at the back to fit the line of the cowl.

Think I've still got my seat if you want one to carve up and see. Happy to donate it to the cause.

[bluedrags]

Does anyone know some one that does ultrasonic cleaning in Wollongong Sydney are for cheap.

[K6Thou]

Pm stiffsimon here he's in melbourne but is a good dude and a few guys from here have had him clean their stuff.

[bluedrags]

Can anyone help with what is the best thing to close off under the ductail.
Wouldnt mind some pictures too.

[pav69]

just do a custom undertail out of glass .what colour are you doing the tail its gunna be a proper bitch to colour match that powdercoat colour on tank with tailpiece.

[bluedrags]

I think I'll do it black as the tank and swingarm are green so I'll throw a bit of black in there.

[bluedrags]

Does anyone know some good links to show how to do this as I haven't done fibreglassing before but keen to try.

[RevHead]

man if it makes you happy ,then thats all that matters

[bluedrags]

Done a bit of cut and shut today for subframe.
Not sure if it's to high as I still have to get it registered and I am after comfort as well as looks.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0021.jpg
Any feed back would be great.

[RevHead]

looks a bit to long ,it looked good the way you had it before,i think if your going to go that high it has to be shorter.
and its a tad to high ,only my 2 cents worth

[bluedrags]

All good Pete I thought it might be a bit to far away but thought I would throw it on to get people's thoughts.
I am going to trim it down a bit and lower it as well tomorrow.
What sort of foam do you have on yours and is it good for long rides?.

[RevHead]

between my seat and subframe i have 40mil foam to stop the seat base from cracking or rubbing ,but for my seat i have hi density foam 10 think ,its better then a seat full of foam,

[Redmohawk]

Looks good to me without tank , sits up about as high as bars at back.

[nick76]

It looks abit too high and long at the moment,but it is pretty hard to tell without the tank in place???

[bluedrags]

Cut a bit more off today.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0024.jpg
Don't worry about exhaust I have a carbon one I'll be cutting down to a shorty.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0031.jpg

[RevHead]

that looks really good now

[bluedrags]

Anyone fitted this to a older model like mine.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0033.jpg

[bluedrags]

Just scored these of eBay as well a subframe for $30.
http://www.ebay.com.au/itm/170826753468?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_500wt_922

[bluedrags]

Just won these off ebay for a good price- Triumph Street Triple 2010 mufflers.
Will have to see if I can fit to bike.
http://www.ebay.com.au/itm/120923051357?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_500wt_922

[BANDITROD]

they will look good but they are blooy heavy mate so you will have to cut them open and gut them

[bluedrags]

Will have a look when they turn up and if I can will empty the guts out of them.

[bluedrags]

In middle of shed clean up hence the mess I decided to put front wheel and calipers on and rear subframe.
I know it needs to be shorten but not sure on height yet to how much I cut off.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0031-1.jpg

[BANDITROD]

that tail looks a bit bulbous IMO mate but if your gunna use it i would mod the front seat and bring the plastics right up to the tank

[bluedrags]

Yer that's what I was thinking of cutting frame so plastics go right to tank.
Just have to see how small seat will be but I think it will good.

[BANDITROD]

i done it to that zx9 i did a while back and my arse still fitted an im not that little

[bluedrags]

Neithers mine but just went and had a quick look and should be ok.
Will be busy with grinder tomorrow.

[BANDITROD]

good stuff

[bluedrags]

I have a rear tail light which includes indicators in light are they able to be used or do you have to have separate indcators?.

[BANDITROD]

your supposed to have seperate indicators mate but it realy depends if you live in a cop hot spot

[bluedrags]

Might have to go with separate indicators as well as the ones built into the light just to be different.

[RevHead]

trust me separate blinker are a must in n.s.w ,as i got booked for having a taillight with built in blinker ,fit the tail light and wire it up ,then add smaller side blinkers itl keep the monkeys in blue off you back,

[oldskool]

25cm from centre to centre of indicator and no further back than 30cm

[bluedrags]

Cut 40mm off top bar but I think I might need to go a bit more maybe get the front of plastics just under tank a bit more.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0035.jpg

[BANDITROD]

keep cutting mate i think your right try and get it under the tank more

[bluedrags]

Yer the more I look at it the more it needs to be done might be a tomorrow job or later today have to see if I get energetic.

[BANDITROD]

thats the spirit mate

[RevHead]

use the mounts on the back of the tank to attach the rear plastics to ,when you move the plastics closer to the tank, id cut atleast 100mils to start

[bluedrags]

Did some more cutting no 100% sure about ride height maybe a little bit lower to give me a bit more of a seat.
Looks like I'll have to fibreglass up a main seat or I might be able to do a cut and shut.
http://i305.photobucket.com/albums/nn209/bluedrags/IMAG0036.jpg

[RevHead]

use rubber gromits and some crush tube to space out the front mounting points,with you seat lift the vinyl and the foam and cut the plastic base away ,the cut the foam and vinyl to match ,do go to hard cutting little by little

[Yella]

Looking good mate

[Bob]

Like the way this is going mate. Looking good

[Gix11]

Perfect length mate. It's your choice with the height and lines. As long as you follow at least one line it should look good. Either line up the top of the tail and pillion seat with the top of the tank, or as you have it there it seems to follow the front frame brace and knee recess in the tank. Keep fiddling and stepping back and you'll make the right decision.

[kartras]

Lookin goood matery. Wish mine was makin some progress at the mo...but I aint :(

still tryin to straighten the zx6r subframe.

[LKC73]

I dont think Blue will mind but this bike has a new home now. As for its function, well its yet to be desided :cool:

[RevHead]

cmon Luke tell us more.

[rod185651]

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/555513_10151179916900712_1475809310_n.jpg

[wackyrider]

Luke, you're gonna own more bike than Large at this rate

[bluedrags]

Did sell it to Luke as I start FIFO work in WA end of next week and won't have time to work on it so I'll be looking at one of this very soon I think.
http://i305.photobucket.com/albums/nn209/bluedrags/7fc4d38e.jpg

[MattyDucati]

Where ya workin at Blue?