Removal of Oil cooler from VFR750

[VFighteR]

Hi All

Seems I have had no luck with getting the hoses on my oil cooler crimped at the ends. Neither Pirtec Enzed or a couple of other hydraulic suppliers will do the job.

because of this I have decided to remove the oil cooler all together, bearing in mind, it is a watercooled engine so maybe it will be ok

has anyone done this and what adverse effects would this have apart from the obvious getting a little too hot??

appreciated

Ant

[BANDITROD]

Send hyofightera pm Anton ..he put a different one all together on his ..either that or get the banjo fitting sizes and length you need and give the guys at John stamnas (0754477411) a call tell them I sent you and the will sort it for ya ask for Kevin

[pommie02]

I used metric compression fittings and rubber fuel hose
then used a after market cooler

[Large]

I would not recommend removing any factory fitted oil cooler.

If the bike didn't need it, it wouldn't be there.

[VFighteR]

quote:Originally posted by pommie02

I used metric compression fittings and rubber fuel hose
then used a after market cooler


where do you get these marvelous things?