Booster
29-05-2011, 08:32 AM
Same as mine detailed in my ride , only differences are it has the full RCC exhaust (i made mine) and this has the RCC t3/t4 turbo and mine has the gt30r, both turbo's spec out very similar and the results will be pretty much the same as mine
Could be modified to fit B-King without much trouble
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=19476&SearchTerms=boosters
http://i120.photobucket.com/albums/o168/TheShredder3/IMGP7597.jpg
Full system with carbon can
Stage 2 RCC Turbo
RCC Headers
Tial waste gate
RCC Waste /dump pipe
Booster built Water to Air Intercooler
Aussie made water transfer unit
Water pump
Water cooler lines
HKS blow off valve
K&N filter fits inside bodywork
Powder coated up pipe/ turbo housing
Fuel pump , wiring, lines & regulator
Hose’s & clamps
Heavy clutch springs & clutch brace.
Valve springs
Head studs & Nuts
Twin muzzy alloy fan blades
3 bar map sensor
Boost controller
Cometic head gasket & spacer
POA
Shane 0402245625
Could be modified to fit B-King without much trouble
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=19476&SearchTerms=boosters
http://i120.photobucket.com/albums/o168/TheShredder3/IMGP7597.jpg
Full system with carbon can
Stage 2 RCC Turbo
RCC Headers
Tial waste gate
RCC Waste /dump pipe
Booster built Water to Air Intercooler
Aussie made water transfer unit
Water pump
Water cooler lines
HKS blow off valve
K&N filter fits inside bodywork
Powder coated up pipe/ turbo housing
Fuel pump , wiring, lines & regulator
Hose’s & clamps
Heavy clutch springs & clutch brace.
Valve springs
Head studs & Nuts
Twin muzzy alloy fan blades
3 bar map sensor
Boost controller
Cometic head gasket & spacer
POA
Shane 0402245625