VFR800 swingarm

[EXBEN]

A customer of mine is selling this so I thought I'd post it up here, he's asking $450 plus postage.
http://img8.uploadhouse.com/fileuploads/10211/10211948cf4d5a004d0edaecee09a8943d8557be.jpg

[xa-mont]

any idea how much work this would be to fit to an SV650? (like how far off the size is ect.

[EXBEN]

sorry no, I haven't done one of those.

[OLD SKOOL BANDIT]

Hey Ben. Don't suppose you, (Or anyone else) would know if the dimensions are the same or very close to the 750 sssa? Wanting to slam one of these puppies into the Bandit.

[Gitzy]

Heres the 750 Dimensions to compare, I don't have 800 dimensions on hand but I'm all over it like a fat kid on a cupcake...

90-93 VFR (shock linkage mount is two lobes on bottom of swingarm)(shock end is a 'fork')
Length: 565
Pivot width: 242 (+3.5 thrust collar)
Pivot diameter: 20
Eccentric outside diameter: 105
Eccentric width: 70 (+3 crenelated 'edge')
Caliper carrier diameter: 75
Caliper carrier width: 14
Brake rotor diameter: 255
Brake rotor mount diameter: 110
Sprocket mount diameter: 175
Wheel drive diameter: 100

94-97 VFR (shock linkage mount is one lobe on bottom of swingarm)(shock end is an 'eye')
Length: 560
Pivot width: 227 (+3.5 thrust collar)
Pivot diameter: 20
Eccentric outside diameter: 105
Eccentric width: 70 (+3 crenelated 'edge')
Caliper carrier diameter: 75
Caliper carrier width: 14
Brake rotor diameter: 255
Brake rotor mount diameter: 110
Sprocket mount diameter: 175
Wheel drive diameter: 100

[OLD SKOOL BANDIT]

Excellent work Toddmeister! What's the pivot width on a 96 B12?

[BANDITROD]

220mm silver fox

[BANDITROD]

That's Inc spacers

[OLD SKOOL BANDIT]

Thanks Magilla, all I need to know now is the pivot width of the 800. Ben?

[xa-mont]

anyone know the pivot width of an SV650?

[xa-mont]

nm... found it:

'03 SV650 Swingarm Pivot Width: 9.5"
'03 SV650 Frame Pivot Width: 9.71"

[BANDITROD]

Sv650 frame pivot 246.5 roughly

[OLD SKOOL BANDIT]

Done a bit of quick research and the 800 swinga is engine mounted not frame mounted so is not as wide according to SV forum.
http://forum.svrider.com/archive/index.php/t-62932.html

[sen]

Damn... I do love me an SSSA... hrm...

[EXBEN]

The 800 ARM is wider than the 750 arm, I'll check how much but I think its about 25mm wider.

[TurboKat]

Yeah, the 800 (VTec & non VTec) arms are about 20 - 30 mm wider than the 750 jobs.

[EXBEN]

274mm wide

[xa-mont]

way too wide for me... i'm out.

[OLD SKOOL BANDIT]

Puts a stop to my plans too. Sorry Ben, I was dead keen.