bloody clocks

[spart666]

hi guys

was going to put on a motogadget clock on the bike as the original clocks
i havent got (and are to big)
looks like the previouse clocks used were from a gsxr 1000 k1
which i sold on
so the delima i completly overlooked the fact that busa has this system were
it shows you error codes in the clocks
and cant find anything on the net about fitting different clocks to a busa
is there a workround?
or am i buggered and have to go back to gsxr 1000 c locks
ive seen a busa drag bike with the motogadget clocks so it can be done but
wiring is not my strong point so baby english guys
cheers

engine and loom busa k

[BANDITROD]

Hey spart I fitted a koso rx2 unit to pab13 busa without any hassle

[EXBEN]

You can use any aftermarket dash, you just won't have the error code feature, I haven't found any aftermarket unit that will do error codes.This isn't a biggie as most problems can be diagnosed other ways. If your really worried about it just make it so you can still plug the stock dash back in if need be.

[fimpBIKES]

as above, i was worried about this on the tlr
but in the end the extra crap in the loom to fit the stock gauges wasnt really worth the hassle

a decent manual with the fault-finding charts and you should be cool

[spart666]

thanks guys
pretty much came to that conclusion going to keep and shorten the original speedo loom splice the new one from it
just in case
talking to another bloke who told me he kept his origial
clocks under his seat hump[:0]???????????????

[FIGHTERMC]

quote:Originally posted by spart666

thanks guys
pretty much came to that conclusion going to keep and shorten the original speedo loom splice the new one from it
just in case
talking to another bloke who told me he kept his origial
clocks under his seat hump[:0]???????????????

i'd say it was he's sofa not his seat he was on about.

[spart666]

:D

you started your bike yet?

[Dynomutt]

You got yours started yet?

[FIGHTERMC]

ya was riding it last week and i stripped
it again on friday and its off to get exhausts made
and have a seat unit on its way from germany.
should have it finished in a month or so
and will post pic's.

[spart666]

quote:Originally posted by Dynomutt

You got yours started yet?


getting closer bill thanks for youre help
still playing with the nuetral light
would help if i got it out of gear
just need to bleed the clutch up
tank should be sorted this week
should be running next couple of weeks[:p]

[spart666]

quote:Originally posted by FIGHTERMC

ya was riding it last week and i stripped
it again on friday and its off to get exhausts made
and have a seat unit on its way from germany.
should have it finished in a month or so
and will post pic's.


still aint seen it mate come on show:D

[FIGHTERMC]

will do as soon a get my new laptop.